XQuery - conversion of Date time

Similar Questions

• TDMS of MDF time stamp conversion error / storage date time change

  I fought it for a while, I thought I'd throw it out there...

  Let's say I have a file TDMS which has a channel of labview time stamp and thermocouple 2.

  

  I load in DIADEM, I get this:

  

  Perfect!  But now let's say I want to save the PDM as a MDF file so I can see him in Vector sofa.  I right click and save as MDF, perfect.  I started couch and get this:

  

  The year 2121, yes I take data on a star boat!  It seems to be taking the stamp of date/time storage TDMS as starting point and adding the TC_Timestamp channel.

  If I change the channel of TC_Timestamp to 1, 2, 3, 4, 5, 6, 7 etc... and save as MDF, I get this:

  

  Very close, 2012!   But what I really want is what to show of the time, it was recorded what would be the 10/09/2012.

  The problem is whenever I do like recording, date storage time is updated right now, then the MDF plugin seems to use it as a starting point.

  is it possible to stop this update in TIARA?

  

  Thank you

  Ben

  Hi Ben,

  You got it right that the MDF use written the time of storage to start MDF that is updated by DIAdem when writing time. We are working on this and will return to you, if there is no progress.

  To work around the problem, you can try convert TDMS MDF in LabVIEW storage vis.

  Something like the following, you can write your start time of measurement to the MDF file.

  

  Hope this helps,

  Mavis

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• Is there an easy way to get a Date/time string seconds?

  I have 2 strings of the format depending on whether I would like to convert in seconds (since 1900). I need this value to set the t0 in a field.

  Date: ' 30/06/2014 '.

  "Time: '16:06 ' 08."

  Is there a CVI function that will do this conversion for me? If not, is there an easy way to do it?

  Thank you!

  This code should do what you want:

  
  
  
  static time_t  calt;
  
  struct Shared  tm tm;
  
  public static char    msg [64];
  
  public static int     AA, mm, DD, hh, mn ss;
  
  strcpy (msg, ' 2014/06/30 16:06:08 ');
  Extract the date/time string component
  
  Scan (msg, "%d [x] %d [x] %d [x] %d [x] [x] %d %d", & mm, dd, and yy, & hh, & mn, &ss);)
  Transfer to a struct tm components
  
  TM.tm_hour = hh;
  
  TM.tm_min  = mn;
  
  TM.tm_sec  = ss;
  
  TM.tm_year = yy - 1900;
  
  TM.tm_mon  = mm - 1;
  
  TM.tm_mday = dd;
  Obrtain calendar
  
  CALT = 0;
  
  CALT = mktime (&tm);)
  
  

• date/time string tabs

  Hello!

  I have a problem with the date/time string format VI. I would like to define the date and time with a tab to see the date and time in different columns so when I opened the data written in excellent... but I can´t! I ve tried with \t in the bar code backslash... (% d/%b\t%H:%M:%S%2u), also with concatenate strings with a constant of the tab in the middle... (as illustrated in attached piece) but the extent of my file the tab written as \09 (14/May\0911:00:20.25) s. The strange thing is that when I use \s (space code) it works fine... Why does only not with the tabs?

  Thank you very much for your answers!

  Hi Mia,.

  as I have LV8 + at the moment I can't dig deep - can someone else check this Express VI (stay away from them )

  You can use simple 'write in the text file' calls instead, just use 'picture to a worksheet string' on your data. That's what I'd do... (Express screws are nice start using LabView or quickly write code running - but they hide all the interesting stuff and won't provide any flexibility for special needs!) And they always need conversion into "dynamic data", which also hides the user's information. Did I mention I don't like screws Express?)

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• How to display date / time in the browser console?

  How to display date / time in the browser console?

  You can set through the Options (gear icon) page in the Web Console (Firefox/tools > Web Developer).
  This applies to the browser console and the Web console.

  • https://developer.Mozilla.org/Tools/Web_Console
  • https://developer.Mozilla.org/Tools/Tools_Toolbox#settings

• How to save an email in .eml format and customize the name of the file, for example the file name will be ' date, time, sender, title "?

  It would be fantastic if when save my emails on my computer the file name can be customized to be something different than just the title of the message. As I suggested in the question, if it could be set up to be "date, time, sender, title" that would be great, much assistance during the passage of a .eml files between colleagues, or just simply organize your emails into folders. Is this possible and if yes, how does one?

  Install ImportExportTools then adjust the Options (see photo).

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• icon of camera on date/time/intro page

  I just noticed the camera down icon to the right of my iPhone screen.  I don't remember seeing before.  It's on the screen that appears after the phone has not been used for some time.  The page with the date, time and "slide to unlock" message.

  I can't figure out how to make the camera icon to go away and it's scary.  Clues?

  Thank you.

  The icon of the camera on the lock screen to take a photo without unlocking the phone. Simply drag the icon to the top and you will be behind closed doors, mode

• Internal battery / Date/time problem

  My NEX-6 will only keep the date/time information after I put it. He was dead when I got it, but after the normal battery charging to full and using the camera, whenever it is turned off, it forgets the time. I did some research online, which said it may take a while to recharge the internal battery, but I tried to charge for 24 hours straight, and using the camera frequently (as described in the manual) and doesn't seem to solve the problem.

  Once, after leaving unused for a few days, I noticed that he miraculously started saving the date correctly, even when it is off. This lasted about a week, but now he has lost the ability to keep the time again, and with the charge Jack did not set.

  Any thoughts? Apart from sending to Sony to repair?

  I tried the factory reset but that did not work. As I don't have a battery (and don't want to buy a second, in which case it is not the problem), looks like I'll need to come back for the service.

• How can I enter BIOS compaq610 screen and set the date, time

  How can I enter BIOS compaq610 screen and set the date, time

  Hello

  See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.

  Kind regards

  DP - K

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• Daylight Saving Format Date/Time String vs get time in seconds

  Hi all

  I have developed a real-time application using a cRIO 9074 which has two loops. The first gathers data and records the time using the module of ' string of Format Date/time ' with the following time sting: '%d/%m/%Y % H: %m ". The output is a sting with mouth/day/year hour: minute.

  The second loop Gets the cRIO time using the module "get Date/Time in Seconds ' and the output of timestamp is sent by a shared variable for an application that is running on a local computer.

  The problem started Sunday last with DST. With the help of MAX I am able to see that the time of cRIO is bad (1 hour less) and that him "automatically adjust clock for daylight saving time" is not checked and gray, so I am not able to change it.

  The time of the first loop by using the "Date and time Format string' returns the time elapsed between the cRIO (1 hour late), however the time of the second loop is OK. I have manually corrected time using MAX, so now the first loop is correct, and the second is now over an hour.

  Any ideas?

  Dear RavensFan, thank you very much for your answer.

  However, this was not the problem. Apparently the result with or without the element of DST is the same. I solved the problem, for now, by changing a parameter not on the function "get Date/Time in Seconds" but on the time stamp indicator.

  By right clicing the indicator and go to the display Format and the advanced editing mode, I have changed the Format string to a universal time container of this: %< %="" h:="" %m="">< t="" %="" ^="">< %="" h:="" %m=""><>

  Apparently the time from the 'get time in seconds' is still an hour longer, but now it is correctly displayed.

• Date/time format and different regions

  I'm developing an application in this case to the United States on the English LV2009 software.  This application will be installed in many parts of the world, and I just discovered a problem with the date and time that I try to understand.  A screenshot of the application running on a Chinese computer is attached.  At the top right there is a 'results save location' which has a month and year added file name.  I use the date/time format with modifiers for the name of the month and the year in 4 digits (%B %Y).  On my PC, it displays in July 2010, but on Chinese computer it 7 01.  In addition, the reason that it says wrong serial number is that I compare the SN 2-digit year, and it seems to enter it correctly.

  On my PC, I tried to change my date settings in Windows and it doesn't seem to affect the production, as it does on Chinese computer.  I know there is a UTC Boolean selector which can be activated.  That will make a difference in the way that the date is displayed by this function?

  This is one of the few issues I encountered when developing a program for several regions, but it is currently the only one, I have not yet solved.

  I would expect month name to be specific langauge.

  For example, the word April in French is April and is abbreviated Apr. I would use a number instead of the name.

  The thai calendar + 543 years compared to the Western calendar, so a PC Thai could show a specific locale of 2553-07-13 date. Your computer may display 13/07/2010. I'm sure that the year of the Chinese calendar is different from that of the Western calendar.

  Using UTC should force LabVIEW to use the Gregorian calendar, based on the ISO-8601standard.

  Because your users work with technology and would probably recognize a Gregorian day/month/year combo I would stick with % Y_ m_ % d. % and UTC = TRUE.

  I contributed a VI to the community OR that you could use if you wish. It has many options and is based on ISO-8601

  .

  http://decibel.NI.com/content/docs/doc-7199

• Write the Date/time value to a Ms Access table

  I have a headache. Here is the statement I send and the error I get:

  INSERT INTO VALUES (TestID, DateTime) measure (8732, #' 2015 - 01 - 28 16:17:58 ' #);

  NI_Database_API.lvlib:conn Execute.vi-> 2.vi Untitled-> Untitled 1. VIADO error: 0x80040E14
  Exception occurred in the Microsoft JET Database Engine: syntax error in INSERT INTO statement. in NI_Database_API.lvlib:Conn Execute.vi-> 2.vi-> vi Untitled 1 Untitled.

  I tried most of the possible combinations of #, "," around the datetime string and I also tried datetime string formats YYYY/MM/DD hh: mmS AM/PM, DD/MM/YYYY "

  In writing to the other data fields don't cause any error, I only get the syntax error when I try to write in the DateTime field (data type Date/Type)

  I use LV2012 with database connectivity kit and MS Access 2010 (stuck with it, cannot be changed). Same problem with the connection of the user DSN or UDL (jet engine).

  It works with the DB tools Insert Data.vi but we want to use a direct INSERT statement using the DB tools run Query.vi, because we have had a few locks error 0 x 80004005 which can be caused by the DB tools Insert Data.vi using ADODB. Recordset.

  Is attached the vi that I use for debugging.

  Ben64

  Finally found the problem!

  Even if the data type is Date/time in Access, and it is possible to define the name of the DateTime field it seems to be a small Word when you use a SQL statement. The solution is to add DateTime hooks like this:

  INSERT the EXTENT (TestID, [DateTime]) VALUES (1,'2015-01-28 06:52:16 ');

  Thanks for your help Cosworth.

  Ben64