Y at - there any API in EBS for updating the attributes columns on lines IN... ?

Similar Questions

• Are there any programs that work similar to the old Adobe Pagemaker?

  Are there any programs that work similar to the old Adobe Pagemaker?

  Aldus Pagemaker, later Adobe Pagemaker were abandoned 12 years ago and since some of it is functionally distributed and shared between Adobe Illustrator and Adobe InDesign.

  If you are looking for something similar, Illustrator and InDesign will be the direct dead unless you have a copy of PageMaker running on an older operating system that supports

  After your choices narrow down to a few suggestions here

  http://www.MakeUseOf.com/tag/free-alternatives-Photoshop-Illustrator-Lightroom/

  and if you are looking for something more 'professional' look in the affinity Designer

  https://affinity.serif.com/en-GB/Designer/

  or QuarkXPress

• are there any current HP printers that use the HP 02 print cartridges? Old printer C6180 goes wrong.

  are there any current HP printers that use the HP 02 print cartridges? Old Photosmart C6180 printer goes wrong and have a lot of cartridges.

  The Site of HP Pageyield lists the following printers compatible with 02 cartridges:

  • " HP Photosmart 8200 printer
  • " Printer HP Photosmart D7100
  • " Printer HP Photosmart D7200
  • " Printer HP Photosmart D7300
  • " Printer HP Photosmart D7400
  • " All-in-one HP Photosmart 3100 Series
  • " HP Photosmart 3200 all-in-one series
  • " All-in-one HP Photosmart 3300 series
  • " HP Photosmart C5100 all-in-one series
  • " HP Photosmart C6100 all-in-one series
  • " HP Photosmart C6200 all-in-one series
  • " HP Photosmart C7100 all-in-one series
  • " HP Photosmart C7200 all-in-One series
  • " HP Photosmart C8100 all-in-one series

  I do not believe there are all the models currently available that use cartridge 02.

  I heard that HP has (had?) a trade-in program for its intact packaging expired cartridges.  See this post for a suggestion.

• is there any document/step by steps on the upgrade of esx4 to esxi4?

  is there any document/step by steps on the upgrade of esx4 to esxi4?

  Welcome to the Forums - there is no way to upgrade to move form ESX to ESXi because basically they are the same product, the difference is the way they are managed - ESX has the Service Console for manangement and ESXi you manage directly through the vmkernel - there going to the ot to be fresh install.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I thought about it! I went into the plug ins on Chrome and changed a setting. Thank you!

  Marie Larsen

  Real estate capital

  801-597-9926-cell

  [email protected]

  http://www.marielarsenrealtor.com/> www.marielarsenrealtor.com

  'f' Logo Marie Larsen-Equity real estate

  https://g.twimg.com/Twitter_logo_blue.PNG Marie_Realtor

• Personalized program for updating the GL FDF journal each time magazines are imported

  Hi guru,.
  
  I have a requirement I need to build a custom program to update the FDF Journal Journal lines. This program will be executed whenever newspapers subledger is imported to GL.
  
  OPM, AP, AR, Inv & OM will be that review sources for those WHAT FDF journal line must be updated.
  
  Well want to someone could give me the best way to do.
  
  Thank you and best regards,
  Genoo

  Hi Geno,

  You can see the following one of our users of large clear forum article

  http://www.oraclebusinessapps.com/?cat=164

  I hope this helps.

  Thank you
  Anil

• Is there any API information for vCO config.. ?

  Hello

  I'm looking of vCO API that can me DO the config related information (such as the network, authentication db, licenses etc.) and workflow related information (e.g. list of all workflows by default, workflows created by the user, schedules (if any)). Is there an API that can get me all this information... ? I looked in the documentation and all I can find is how to DEFINE these configurations using workflow IDs. But I couldn't find any API to GET this info.

  I also searched the workflows in vCO, but I could not find them. All the config associated work streams listed are to SET configurations.

  What I'm trying to accomplish the task above, is that I take a backup of the vCO and am restaurant then. I want to automate the procedure to verify the accuracy of the vCO after restore. So I thought to compare the associated config info and associated workflow info before the backup and after restoration. I tried the following things, but none of them seem to be trustworthy.

  • Associates of config info
    • Export the config (vmoconfig) before you perform the backup and after restoration. Compare the checksum for these files. But the checksum does not at all. Actually, checksum is does not match even if I take two times without making any changes to the configuration. Maybe some timestamp is included inside the vmoconfig file. I couldn't find the differences because it is a binary file.
    • I saw a few config files under/etc/vco/app-server (sso.properties, vmo.properties etc.). I don't know if it's ok, if I compare these files. If they are active, can I safely assume that vCO restoration is correct... ?
  • Associated workflow info
    • I created the packages before and after the restoration and tried to compare checksums. Here, too, I faced the same problem. Although I did not bring any changes to the workflow, checksums are different.

  So I'm puzzled so how to proceed. Any help on this front. ?

  You can recover some of the config via the REST here: https://vCOServer:8281 / vco/api/server-configuration and if you need more to service the plug-in configuration inventory should help: https://vCOServer:8281 / vco/api/inventory/Configurator

• iPhone 3 iOS 4.1 - is there any app available yet for this phone text message

  I would like to use my old iPhone 3 iOS 4.1 for an emergency situation. Is there any text message apps that still work?

  Not for the e/s 4.1, no.

  Nowadays, the minimum requirement is iOS 7.

• Is there any application to copy contacts from the phone android - att to verizon iPhone SE

  I want to copy all my contacts from my android phone (nexus 5 LG) which is at & t locked on my new iPhone IS which is locked Verizon.

  Is there any application I can use for backup and copy over the clouds. I don't want to add all these contacts 1000 + to my vision of the laptop.

  Assuming that you are syncing contacts on your Android phone with your gmail account, you can just sync them down to the iPhone by adding your gmail account.

• Is there a tool or method for editing on a pdf form line items?

  We have recently created about 200 different forms of acrobat with field elements.  We started with MS Word and converted to PDF using Acrobat Professional, then we added in the form elements.  However, the customer wishes several lines deleted or modified, the borders of table changed etc.  Is there a tool out there that will allow me to change the PDF directly and delete a line or fill a void in a table?  We do not want back to versions of word and start all over again.

  For example, please read this file: http://kendallrace.com/cas.pdf we must eliminate this half described table cell at the top left, we must eliminate underscores in the middle of the page.  And sometimes the border of a table cell could be described not so we need to draw a line to finish the outline.

  Thanks in advance for the help,

  
  Trent

  You don't need to recreate the fields after edting the Word doc and create a new PDF. Just replace the old pages with the new. Fields, code, links, etc. will remain. To do this in Acrobat, select: Document > replace Pages

• Is there a command to keyboard for "Show the Desktop"?

  Keyboard command

  Looking for a command to keyboard for "Show the Desktop".  Sometimes on a Web page where the plateau area are invisible even reduce it after clicking on the option.  Advice requested

  Looking for a command to keyboard for "Show the Desktop".  Sometimes on a Web page where the plateau area are invisible even reduce it after clicking on the option.  Advice requested

  Keyboard shortcuts for Windows

  Table of keyboard shortcuts

  Try 'Of the Windows Logo key + D' to show the desktop.

  Try "Windows Logo key + M ' to minimize everything.

• Change in the merger of insert and create a procedure for updating the records after

  Hello
  
  I have a table that contains about 50 M lines of partition, and every day I have an application that performs a merge to insert records statement about 100 k per day and it's 300 M updates a day.
  
  Because I both update and insert the application performs a merge.
  I need to make at least 500 M, updated day by day, and for this reason this solution doesn't have enough performance for what I'm asking.
  
  I think another solution that I will try to implement now, and I just posted this in an attempt to get help on the option that I may have to do.
  
  I want to start putting in place:
  -Locations is updated 'last_record_date' using 'KEY1' and 'Key2' "KEY3";
  -Change the application to only inserts into a temporary table.
  -Have two procedures, one that takes the new records from the temporary table and inserts it into the final table, and another that selects records which is updated and perform an update.
  -This two procedures will choose the records and delete them from the temporary table (or mark them as updated\inserted).
  
  The volume is very large, so performance is a challenge! That's why I'm writing this, because a solution with enough performance for the intermediate stage will be difficult.
  My final table is partitioned by date and the date is the area that I need to update (instead of create daily partitions in order to reduce the frequency of the movement of the line, I create monthly partitions)!
  It is currently my table definition:

  CREATE TABLE MY_TEST_TABLE
      (KEY1                           VARCHAR2(50 BYTE) ,
      KEY2                         VARCHAR2(50 BYTE) NOT NULL,
      KEY3                           VARCHAR2(50 BYTE) ,
      last_record_date                    VARCHAR2(50 BYTE) NOT NULL)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
     STORAGE   (
      BUFFER_POOL DEFAULT
    )
    NOCACHE
    MONITORING
    ENABLE ROW MOVEMENT
    PARTITION BY RANGE (last_record_date)
    (
    PARTITION MY_TEST_TABLE_201112 VALUES LESS THAN ('20120101')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201201 VALUES LESS THAN ('20120201')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201202 VALUES LESS THAN ('20120301')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION def VALUES LESS THAN (MAXVALUE)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING
    )
    NOPARALLEL
  /
  
  
  
  -- Constraints for MY_TEST_TABLE
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY1" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY2" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY3" IS NOT NULL)
  /
  ALTER TABLE MY_TEST_TABLE
  ADD CONSTRAINT pk_MY_TEST_TABLE PRIMARY KEY (KEY1, KEY2, KEY3)
  USING INDEX
    PCTFREE     10
    INITRANS    2
    MAXTRANS    255
  /

  Thank you
  Ricardo Tomas

  naoseionome wrote:
  Hello

  My version is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  It's the DOF I used to create the database.

  The merger is common during every day for about 10 M records.

  There are several methods to do the update, but they do sequencially to avoid deadlocks (because I can't control the source and each process can update the same keys.

  The update uses "KEY1, KEY2, KEY3" to update the value 'LAST_RECORD_DATE' have impact by being date or varchar2?

  I'm still waiting to receive permissions in order to follow up the matter, but in the meantime, in that I am trying to implement this work around in order to accelerate a development in the case where it would be necessary! Comments only I have at the moment, it is that he is not able to process the total amount of records timely (order book is generated).

  Thank you
  Ricardo

  Well, the first thing we do is to change the type of data type varchar to a date. The main impact is that a date is not a string, it's a date. If you are adding data processes in different date formats (which is possible when you use a character to store information) you're going to be very sad (good luck converting back an effective date).

  An example of how this can happen easily.

  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  -----------------------------
  12-jan-2012 10 55:33
  
  1 row selected.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?alter session set nls_date_format = 'yyyy-mon-dd';
  
  Session altered.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  --------------------
  2012-jan-12
  
  1 row selected.
  
  Elapsed: 00:00:00.00
  

  Assuming that the client passes the column as an Oracle DATE will make an (implicit) conversion to store the data as a string, which will be based on the current settings of the NLS for the session. This allows also for someone to completely non-jour the information in the column (super bad). It's just really bad form to use strings to store dates, numbers, anything that is not naturally a string.

  Based on the description of your problem, I can't imagine how your partitioning scheme performs one action in another that require more work in order to process the updates (which are most of your needs). Partitioning does not equate to increase performance. It is a tool that, like every tool has its place, but I do not think that this is justified for what you do (certainly not how you currently use it anyway).

  I say no partitioning can not be useful for you, but I don't think that on the column that you are currently using is 'good '.

  Something I would like to personally study (must be able to compare this approach to your course, if you need parameters for comparison) if I were you would be using a Table Index organized for it. It will take more time to perform the operations insertion, but that is a small part of all the work that you do for this process. For updates, it should eliminate a lot of IO, assuming that you are doing an INDEX seek followed by a table access by ROWID to perform updates. This recommendation assumes that everything you said is true. You have 4 columns in your table, of which 3 are components of the primary key and the 4th is a date (note I did not string :)) and that you refresh mainly, not fit.) Also that you have no 'secondary' on this entity index (and none are needed).

  I would investigate this approach before the solution of temporary table that you are currently studying.

  See you soon,.

• Cannot update the END_DATE_ACTIVE column in the HZ_CODE_ASSIGNMENTS Table through the API

  Hello
  
  I'm not able to update the column END_DATE_ACTIVE HZ_CODE_ASSIGNMENTS Table through the API: hz_classification_v2pub.update_code_assignment.
  After running with all the facings that he managed, but it is not properly updated the end_date_active to the date given as parameters when executing the API defines it rather end_date_active to null.
  
  Please help.
  
  Thanks and greetings

  Salvation;

  What is your version of the EBS? If you are on r12.x you can hit bug. Please see:
  Unable to update HZ_CODE_ASSIGNMENTS end_date_active with January 1, 2012 [1166367.1 ID]

  Respect of
  HELIOS

• Registration type of best practices for updating the mapping of cascading for account drop-down list

  1. most bearing the name of choice in parent list values and related lookup has been changed in the main list of the external application, so the same should be updated in CRMOD.
  
  2 to update the value of the list of choices, do we need to DISABLE the existing value and CREATE a new list of selection.
  
  3. are there best practices to avoid the manual pick list Cascading draw for the record type account? because we have about 500 values in list dropdown to map with parent and related list of choice.
  
  Thank you!

  Mahesh, I recommend disabling the existing values and create new ones. This means that the remap manually cascading dropdown lists.

• Problem of JMS deployment plan for updating the JNDI names

  Hello everyone, I am working on Oracle SOA 12 c on a 2-node cluster environment. I am facing problem update the JNDI for jms adapter deployment name. I created jms, jms module and Distriubuted queues and manufactures servers connections. When I create jndi say ' ist/xx/jmsqueues' name in the adapter to jms under deployment and update the name of the connection factory against property connection factory in JNDI eis/xx/jmsqueues name.  After that I updated the resource with the location of the plan in respect of the group path. But the problem after activation of the changes the created "eis/xx/jmsqueues' disappearing off the coast, but when I check the information contained in the plan, I see the details of name and jndi connection factories. To make sure of my setup works very well, I do use the jndi name say HIA/ws/queues existing and update the factory connections. After the test, I was able to publish the message to the queue. The only problem I see with new jndi names and for that reason I am not able at all tasks related to the queues. I really appreciate if some light here. Best regards, TJ.

  Try the cancellation of the deployment of the JMSAdapter.rar and install it once again from the location below:

  $ORACLE_HOME, soa, soa, connectors

  Try to target them to regroup and try to do what you do.

  When the JMSAdapter is corrupt or plan is not created correctly, we see this odd behavior. You can try this and check.

  Concerning

  Pavan