Y570 Windows 7 reinstall errors

Similar Questions

• After reinstalling Vista, when you try to do Windows updates get error 80073712

  Initial problem was unable to update windows. Reinstall Windows Vista. Now meet 80073712 error.

  Is there a reason why you don't have not advised SP level you use, etc.?

  http://support.Microsoft.com/kb/555375 >

  There is a tool that will try to fix the inconsistent to the component store but, State if the system has malware resident, then it may not work properly.
  
  A general solution, *IF* is no malware problem, would be to run the system update tool.

  (When was the last time you checked your system for malicious programs?)

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool>

  Read this:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310>

  NOTE: Before going through the steps provided for in article KB957310, I suggest you you to reset windows component update and check if you can install the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058>

  UTC/GMT is 12:26 Tuesday, June 12, 2012

• 9.3.3 iOS and Windows XP, iTunes error 80090326

  9.3.3 iOS and Windows XP, iTunes error 80090326

  Run the latest version of iTunes 32bits version 12.1.3.6

  Windows XP SP3

  iPhone 4 running iOS 7.1.2 can connect to iTunes without problem

  iPhone 4 running iOS 9.3.3 s cannot connect to iTunes: error 0 x 80090326

  Have tried to reinstall iTunes, QuickTime, without success to 'fix '.

  With the help of Microsoft KB 968730, tried to add support for SHA-256 encryption by applying the XP 375554 fix, without success.

  Looks like the XP upgrade to > = Windows 7 is the only solution that works.

  Someone at - it solutions for connect an iPhone running iOS 9.3.3 to iTunes on Windows XP?

  Important information, I forgot to mention:

  The iPhone 4S running iOS 9.3.3 was completely wiped out and showed the "Welcome" screen

  I restored from backup to iCloud live and from that moment, I could connect the phone using iTunes

  It is therefore some kind of problem with a blank iPhone, not yet implemented at all.

• Satellite L850 - 1 P 9 - Windows 8 critical Error athwx *.

  Hello

  recently, I bought a new laptop, a Satellite L850-1, P 9.

  The first week of using the laptop never showed signs of Ant problems, but in the last 3 days I get a BSOD that stops at the laptop.

  Before closing, I have thus written in a document of something like this "athwx_8". I read that this kind of error is related to the software that can be installed.

  The software that I use now is the same that I used on my old laptop, it may be that something related to driver software.

  Here is a link from which grab the windows event viewer: [errors found | http://sdrv.ms/1a0q3e6]

  Hello

  I recommend you to reset the laptop back to factory settings.
  Let's hope it's just a software problem that could be solved by the system recovery.

  Don't know how to do this?
  If this is not the case, check this useful document from Toshiba:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  You should choose the option * reset your PC *.
  This would remove and reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a pure installation of Windows 8, or the default configuration of OEM factory, depending on the medium used for the operation.

  Any comments would be greatly appreciated

• Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Hello

  I have a Compaq Mini - about 3 years - and the noise disappeared today.  The sound icon in the lower right corner of the screen disappeared.

  In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.

  XP sounds and Audio devices Volume Control Panel tab no. Audio Device.

  I think that the driver may be missing?  I don't have the start up CD and don't know where or how, download the drivers of its replacement.

  Any help is appreciated to get my sound back!

  Hello:

  This is the page for support and drivers for your laptop.

  You can try reinstalling the audio driver XP from there.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4105117&cc=us&DLC=en&LC=en&query=CQ%2010%20101SA%20&tool=

• Update Windows XP 0x8712F638 error code.

  After you install the Windows updates today on my Windows XP pc, restart I get error code 0x8712F638and it seems that the hard drive no longer exists. Nothing seems to work even not the disc to reinstall Windows.

  Desperate. Help, please!

  * original title - updates killed pc - hard drive disappeared. *

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636 [1]

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  =====================================
  [1] VERY IMPORTANT!-online Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) whenever Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (for example,Microsoft Security Essentials - free).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 update error code 8000FFFF

  Howdy, I'm having a problem recently with Windows 7, do not update anything another Defender to windows then.  All other updates give 8000FFFF error code.  The latest good updates I had were 16/08/2010, then the first failures were 24/08/2010.  The only changes to my system since 08/16/2010 are the latest version of Firefox and I installed Starcraft II.  I spent hours going through the links of this error, but in almost every moment, the answers given are for windows vista that do not work for windows 7.

  I did a restore of the return if the system would let me which unfortunately is 24/08/2010.  I also tried to install updates manually by receiving the same error.

  Operating system = Windows 7 premium 64-bit,

  Anti-anti-virus/firewall = Windows defender (had norton 360 installed, but I was told IT caused with windows defender issues used the norton removal tool to uninstall.)

  It's pretty much a skeleton system, I use for games so that other then 3 games and firefox, it is has nothing in what the system did not come with installed.

  Any help/ideas are much appreciated.

  Thank you

  JLC

  Anti-anti-virus/firewall = Windows defender (had norton 360 installed, but I was told IT caused with windows defender issues used the norton removal tool to uninstall.)

  Who told you that? Properly installed, Norton 360 turns off default Defender. (Defender is an anti-spyware application, not an anti-virus application.)

  Since you did not have an antivirus application installed for who knows how long, chances are you see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get a window which States; - error IM32FAX. DIL how to refund it?

  I keep getting a window displaying;

  Error

  IM32FAX. DIL

  Not found

  Ok

  What is the problem and how to fix it?

  Hi Dennis,

  Please report the problem to Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3. when exactly you get the error message?

  The error message you get to start usually occurs if an application of Lexmark or a Lexmark device does not work correctly. You can try to uninstall and reinstall the Lexmark applications installed.

  You can view the following link to uninstall a program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this seems to fix the problem, you can contact Lexmark to obtain the latest drivers Lexmark and installed applications to continue using Lexmark devices.

  Let us know if it helps, and if you need additional assistance.

• Windows Mail 0x800CCC0F error code.

  My Windows Mail software has suddenly stopped working and now shows an error 0x800CCC0F code both to receive and send mail. I have the same account settings (POP3, SMTP, SSL, socket, etc.) on another PC using Outlook Express, which works correctly. I recently installed Microsoft Visual Studio 2010 and Microsoft SQL Server 2008 and my PC of Windows Mail and Mail has not worked since. Is there a conflict between the software? How can I restore my Windows Mail capabilities?

  The error "suddenly come to an end" is usually caused by interference from an antivirus program. What antivirus do you use? Some of them are causing problems with Windows Mail over time. At a minimum, email, scanning in the antivirus must be turned off, although maybe it's not enough to eliminate all the bad effects. In the worst case scenario, your antivirus program may be uninstalled/reinstalled or replaced. A free antivirus that is 100% compatible is available here:

  Virus, spyware & Malware Protection Microsoft

   

  E-mail analysis in any antivirus must be disabled, for the reasons explained here:

  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

   

  As an alternative to the replacement of your antivirus, consider upgrading to Windows Live Mail, because it is less prone to suffering from the ill effects of too intrusive antivirus programs:

  http://download.live.com/wlmail  

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "monaro_man" wrote in the new message: * e-mail address is removed from the privacy... *

  My Windows Mail software has suddenly stopped working and now shows an error 0x800CCC0F code both to receive and send mail. I have the same account settings (POP3, SMTP, SSL, socket, etc.) on another PC using Outlook Express, which works correctly. I recently installed Microsoft Visual Studio 2010 and Microsoft SQL Server 2008 and my PC of Windows Mail and Mail has not worked since. Is there a conflict between the software? How can I restore my Windows Mail capabilities?

  Here is my error code.  How can I solve this please?  FYI, I am not competent computer, so explanation should be clear enough.  Thank you.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  "Subject ' Emailing: ARMS DEMAND - PROJECT (2) .doc"
  Server: 'mail.bigpond.com.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Gary van, MVP (Mail)

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• I can receive email, but not send. Windows Live Mail error ID: 0x800CCC0B__

  It was fine a couple of days, when I last sent an email, but since yesterday I can not send and get the following message.

  An unknown error has occurred.

  Subject 'test '.
  Server: 'mailhost.zen.co.uk '.
  Windows Live Mail error ID: 0x800CCC0B
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  You have a configured antivirus program to analyze the messages, including outgoing mail?  It is the main causes of problems sending, so it is best to remove it from the environment.  Uninstall your AV program and reinstall it without any lscanning may feature.  You can also open a command prompt window and see if you can connect to the server and the port you are trying to use.

  C:\ > telnet mailhost.zen.co.uk 25

  [Ctrl +] followed by 'Quit' you will get if the connection is successful.

  Have you talked with Zen people?  Have you read their installation instructions? http://www.zensupport.co.UK/Knowledgebase/article.aspx?ID=10657

  Brian Tillman [MVP-Outlook]

• Windows 7 Windows Live Mail error ID 0X007007A how to fix it please

  Windows 7 Windows Live Mail error ID 0X007007A.  Trying to send links with messages, but will not.  How can I fix this please.

  Hi Mary,

  According to the description of the problem you are facing problem with Windows Live mail. When sending links to messages you have found the 0X007007A error code. The question might be if there is a corruption of parameters. So, I suggest you to repair Windows live mail as its corruption could be the cause of your problem.

  We recommend you to repair Windows Live Mail to check if this solves the problem. Before you repair Windows Live Mail, you can back up your files to ensure that you don't lose one of them. You can click this link to find out how to make a backup of your files.

  Once your files have been backed up, you can then follow the steps below to fix Windows Live Mail.

  1. Click on the Windows key or click on the Start icon.
  2. In the search box, type Control Panel .
  3. Click programs, click uninstall a program.
  4. Find Windows Essentials.
  5. Right-click on Windows Essentials and click Uninstall/Change.
     A window will appear asking to delete or repair Windows Essentials.
  6. Choose to repair all program Windows Essentials.

  If the repair doesn't work, then we recommend that you uninstall and then reinstall Windows Live Mail. You can follow the same steps as above but choose Remove instead of repair. You can visit this link where you can download a new copy of Windows Live Mail.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows 7 Upgrade error during installation

  During the installation of Windows 7 Home Premium (64-bit), I get this error message "Windows cannot copy files required for installation.  The files may be damaged or missing.  Error code: 0 x 80070017.  In this case at 65% of the files copied.  I use the option to upgrade the current operating system Vista Home Premium.  Removed external devices and disabled Virus/Malware protection.  Any thoughts on this error or a similar discussion that I didn't know.  Thank you

  Rick

  Try to download a backup copy:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Download windows 7 gives error

  Hello

  I just bought a HP elitebook and I just tried to download a copy of windows 7 here:

  https://www.Microsoft.com/SV-SE/software-download/Windows7

  It gives me an error saying something is wrong with the product key.

  I couldn't find a sticker with the product key and I had to use a tool to get it.

  How should I proceed?

  Thank you

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  In addition, you can use the built in recovery partition to reinstall Windows 7:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For HP, press F11 directly after switching on the device

• Windows 7 reinstall "invalid product key".

  I recently started a computer fixing for someone, they got three Dell Optiplex 755 desktop computers, and I got a few pieces of each of them (hard drive, processor, ram cards). I got the computer to boot, but since it's so old and I don't know what is the file system and it is a bit slow, I tried to reinstall Windows. I have the disc to install Windows 7 Professional x 64 and went to control Panel\All Control Panel Items\Recovery\Advanced recovery methods then clicked Reinstall windows. It restarts with the disc and went to the screen configuration, but then stopped and said that you can not install Windows because it has an invalid product key. Don't know why it does, but when I got to do start back when I also got to put in it, it says that Windows needs to be reactivated because of hardware changes, so in PowerShell, I typed in [slmgr-ato]. It worked, and after a reboot the lower right corner of the Office had more "Is not a genuine copy of Windows" on this subject, so I guess it worked. Can someone help me?

  Hello

  Please contact Microsoft Community.

  I understand that you are having problems in the activation of windows.

  As initial troubleshooting I suggest you refer to the mentioned article and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-invalid-product-key

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problems-frequently-asked-questions

  I hope this helps. Feel free to contact us again for assistance.