Yet Blu - ray menu blurry, fines content

Similar Questions

• Blu Ray Menu then jumps and plays the 1 key

  IM creating a Blu Ray menu with a video loop. After the first 12 intro second, I have a loopback point together for the real part of menu. The menu is set as the first piece of theatre.

  My problem happens after I have burn the Blu Ray. The intro works very well, but when he is about to launch the loop menu it automatically plays the first button. Then the transition I installed plays and begins at the first video. If I push the button of main menu or menu from the top of the remote control, it will return to the menu and immediately replays the first button.

  This does not happen when I preview it in yet. Everything works as I want only it in preview mode.

  Help, please!

  P

  Looks like key 1 is the default value and the value of autoactivate.

• Make blu - ray discs with the content of the standard dvd in Encore CS5

  Given that blu - ray 25 gb discs have become affordable, I would like to take advantage of the increased capacity of the content of the standard DVD on them.

  In a Word, I would put about 8 hours of flow 8000 720 X 480 video on a disc blu - ray 25 GB with no transcoding.  If I said that my project is a DVD I can tell it to "do not transcode" my property, but as soon as I change the option on Blu - ray, I have a wide range of Hi Def only options or automatic transcoding.  This is much more than 25 GB of the file size.  I can do this in TMP GENÇ TMPGEnc works, I can specify each track or not to transcode, and what bitrate etc. and then burn a blu - ray disc-compatible with the standard def content-but my menu options are more limited than in the still and the work process is slower.   I'd rather that in again if possible.  Is there a way to do that in Encore CS5?

  Stan Jones wrote:

  The problem for me is the reason why you do not get "do not transcode" for a DVD file apparently valid, just because you make a Bluray disc.  I wonder if you change the image size in the properties of transcoding bluray.  I just show him the "do not transcode" for a non-transcoded avi file and also a previously transcoded m2v.

  all my videos that I coded for this and the last project had a black frame around them. for some reason any capture has not quite completely filled the entire box. not a BIG deal, but in the video effect > motion > scale I changed them all to 103 to 105, and I think that this IS why with my workflow wanted to transcode. so I just jumped the man in the middle and in first, like mpeg to preserve all the stops of chapter and chapter names.

• Red images in my animation Blu - ray Menu

  It seems that whenever I start a new project, Adobe has a new problem for me to work through.

  I'm building a Blu - ray player with a motion menu, which is the length of a piece. I have done this before and had no problem. But for some reason, this time still CS6 done something weird. On the final drive, about two seconds in the menu request, what I had for the motion menu are replaced by solid red. He blinks several times at first and then stays on until about the mark 35 seconds, where it goes back to normal. The menu still works, and the buttons are always visible and selectable.

  Part of the video was created in After Effects and exported as a .mp4 file. Who has been in Premiere Pro CS6 in a chronology that had a single image of the menu as an image until the subject of the second brand 37, i.e. when the EI animation video would begin. This chronology has been exported as file m4v H.264 Blu - ray with a rate of 20-35mbps, that is what all the other videos are set to. The video plays well, if I bring first or look elsewhere, but as soon as even transcode it for the menu, I get the red screen near the beginning. I tried more low and high bit rates, but no matter what, he always does in the same place for the same amount of time.

  Is this a problem still CS6? Don't even like it when there is not a lot of movement in a motion menu? I did others where there is no query in large part of them and had no problems. Or a video driver problem or a problem of video files? Should I simply use a mp4 for the menu video motion since it gets transcoded anyway? Or even is upward if a motion menu is too long?

  I do not know what causes this, but you can find other users who report the problem.

  A user has worked around it by the video resource brining in still and transcoding there. I don't know why this avoided the problem. the delimma is not transcoding so as the reposting in the menu.

  I suspect that you can avoid it by putting all the elements not cross in the film, then still does not make the video in the menu.

• Blu - ray menus

  One of the better comics on DVD features is that the menu system is much more homogeneous.  With DVD, music or video would play only for a specific menu, and if you have changed one menu to another, the music or video would be interrupted during the change.  With BD was resolved.  You can now have a streaming music or video track that plays without interruption, even when switching between menus.

  So... am I just don't how to take advantage of this remarkable new BD or is still simply not able to him (as he cannot always make alternate angles)?

  In other words, yet is not capable of it.

  Still provides only the creation of the basis of the menu.  Missing part Blu - ray menu creation script that is used to activate the enhanced features that see you in most releases of high detail.

• Satellite P855-307 is not play the latest Blu - ray discs

  The Toshiba Blu - ray disc player is is more grateful or play the Hollywood movie Blu - ray discs.

  The recent Hollywood film set of Blu - ray discs in both my Pioneer HDD-Recorder/Blu-ray player and play on my PS3, it is why blu - ray discs are fine.

  Drive Blu - ray on the satellite p855 works so I can play Blu - ray movies non-Hollywood on my Satellite P855 (e.g. "in the shadow of the Moon") as well.

  This also indicates that the Toshiba Blu - ray disc player software can work, so something else is preventing the operation.

  BIOS 6.80 VICTORY
  Version of Toshiba - 1.05.207 Blu - ray disc player.
  Is Blu - ray zone B and 5 changes remain (never has been changed).

  There is no firmware update on the support site of Toshiba for the BD - ROM Pioneer BDC - TD04S.
  Satellite P855-307 runs the original OS (Win 7 HP 64-bit).

  Read the Readme to Toshiba Blu - ray disc player mentions AACS key renewal, although I don't see any way mentioned anywhere by which's made it.

  Corel WinDVD is of no assistance as a player, as well as the trial version of WinDVD 11 recognizes only Intel HD4000 graphics.

  Trial version of CyberLink PowerDVD can't read Blu - ray Disc movie Hollywood but will play non-Hollywood films such as "In the Shadow of the Moon".

  It seems you have a problem to play only some specific BD discs.

  I m not quite sure that your problem, but from my point of view it may be a problem of firmware of BD player. Unfortunately, Toshiba driver page does not only updates the firmware for the BD drive so will not be able to try a firmware update.

  I put t think there is a problem with the playback software (Toshiba Blu - ray disc player) because it seems that you are already using the last available Toshiba Blu - ray Disc version 1.0.5.207 player. If the software is already up-to-date.

  However, the freeware VLC player software/tools are supported BD disks too and play almost all formats and file standards.
  Recommend you test just to see if the problem still occurs even by using such usefulness of these tools.

• Blu - ray disc will not play with Windows 7 installed on the computer hp laptop pavilion g6

  Although the non - Blu Ray discs play fine on my HP Pavilion laptop with Windows 7, discs Blu Ray will not be. How a computer model does this work?

  Hi, John:

  It's the hard drive.

  You need to go to Device Manager, and then click to expand the category of DC/DVD player.

  If the name of the dvd player does not have a BD in the model, it is just a standard dvd player and cannot play blue ray discs.

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• Still, CS6 and Blu - Ray... Best?

  Anyone (well, anyone who has had the chance to try the CS6 programs) can tell me if they feel still manages the better Blu - Ray that she did in CS5.5 (and earlier versions)?

  My main question is whether or not the settings in the menu are always 'one size fits all', that is, the parameters for a Blu - Ray menu are the same as for a DVD menu, or if Adobe realized that they both have a different architecture?

  Thanks in advance!

  (- Jim 8 ^)

  Well, I'm unable to complete a project, Blu - ray, with 6.01. First of all, it was a rendering problem that resolved with upgrade of e t 6.01. Now I have a burning problem. You have read my other posts for more details.

  For what is the menu, these are the same but the look of the HD menu not like crap on Blu - ray.

• OTP-S1100: Menu flashes offshore and on every few seconds but plays Fine Blu-Rays

  Just bought a BDP-S1100 & loaded up all the latest firmware & played a new Blu - Ray player successfully, then I turned off for a few hours, then turned it back. Since then, whenever it's on the menu screen, it flashes & on all few seconds. He stills times fine Blu-Rays without problems.

  
  

• Project yet for DVD & Blu - ray - I can clone it?

  Hello

  I have a video ready to be exported from PremierePro and recorded in PAL 16:9 Full HD. Now, I need to create a DVD and a Blu - ray of the same video disc.

  I want to only create a project and then clone so that I can use it for both media.

  I have already created a project yet, pick a HD theme. I have now completed everything: I've only worked on the menu but no video, jet.

  I would like to know if I can now duplicate the folder and dedicate a folder (still draft) for the DVD and the other folder for Blu - Ray or if this is not possible. I think this should be possible, because if the video is 16:9 for the two media there should be no difference; but do not know.

  Don't forget, I've changed most of what the HD model had. I used just a few things.

  If this is not possible, can you please teach me how to work on the menus and the preparation of the DVD, before I have to insert the video, once when I create two separate circles in order to reproduce the customizations?

  I wish to create two projects still separate and do create all the menu from scratch twice.

  Also, is there a valid book that I can buy being devoted to yet or is not required (perhaps because there is a lot of documentation on the Internet)? I learn properly.

  Thank you

  In theory, this should be possible, but in reality I would create certainly 2 separate projects.

  The main reason is that Blu - ray is 1920 x 1080 square pixels, DVD-video is 720 x 576 (PAL - more on this subject in a minute), and the pixels are rectangular, with the report being in the area of 1.4 PAL: 1 that can destroy a menu if simply scale you down because not only you lose half of your resolution vertical & almost 2/3 of your horizontal resolution , the pixels will be being stretched as well horizontally.

  For these reasons, you will need to choose fonts on the screen very carefully for the DVD version and I would be absolutely for certainty make 2 separate menu fixed if it was my project.

  PAL is not really an ideal standard to use, as it has a rate of 25 frames per second and you're simply unplayable outside the EU on the vast majority of the players & TV systems - you will definitely trouble to Japan & US.

  To make things even more difficult, you can't use progressive scan in PAL resolution either - it's just not in the Blu - ray standard - you will need to use interlaced.

  The video is probably the least of your worries, however. First & still may reduce but also make the necessary encoding MPEG-2 for DVD - personally I'd this separate 2 processes, review the decline in SD resolution first to a provisional 10-bit lossless codec and this review of a problem before I did the final version of MPEG-2 for DVD.

  Hope this helps

• Lack of menu Blu Ray

  When I burn to disc, the Don t of the menu will appear. I have triyed to burn an image with the same results.

  Ann was right, that you seem to have an empty menu, even if you had the 'corporate' folder selected, if something was wrong.

  You seems to be used a "empty menu", so that may well have been a model yet.

  But I think that the problem that you describe is that your menu still works in preview mode before, but when built on an image or a disk and read, it starts with the timeline and not with the menu. Is this correct?

  The first thing to check is with a disk engraved in a blu - ray player. You see the problem here?

• Where is my 5.1? (The disc Blu - ray built in yet)

  Hello!

  Basically, I need to do something very very simple... but it does not work. I'm sure you can help.  ;-)

  Still, I have a simple menu with 2 buttons:

  Button1-> audio 1 (2.0)

  Button2-> audio 2 (5.1)

  .. .and it's almost everything.

  The thing is, once 'built', my Blu - ray Disc 2.0 on audio 1 and audio 2 also...

  What is the trick?

  THX ;-)

  The 5.1 track is an .ac3 coming out of the compressor. (Dolby Digital 5.1 Pro at 448 kb/s)

  Can not yet handle this?

• S3100 OTP plays not blu ray online content

  I can access netlix etc. home on the Player menu (although the connection is very slow, which works very well on my apple tv), but the player will not allow the contents of the disk online.

  For example, Zombieland and only survivor, the last two movies I bought, both have online content but the disc menu says "please connect your blu - ray player to the internet to allow online content."

  The drive is connected, it will not show just a link with the contents of the disk online.

  I tried both a Wi - Fi connection and wireless.  The problem persists.

  Any ideas?

  Hi Basementwaj,

  You can check if the BD Internet connection in Setup is set to allow. In the home menu, you must go through the installation> BD/DVD display settings> BD Internet connection> Allow. You can refer to the Operating Instructions for future reference.