Z5C - Sandisk Ultra Dual does not

Similar Questions

• Memory stick SanDisk Cruzer Pop does not not on HP Probook 4540

  Hello

  I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. Have searched the net for possible solutions and followed instructions to look in the Device Manager. It does not appear in the computers tab Device Manager, but in the "Other devices" tab, there are yellow for warning / exclamation symbols next to "Base system device". I right click on the Base system device and properties and it say the following:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  Have you tried 'Update Driver' but he said just that no driver can not be found. Would like to get this sort once for all posed the same question problems when I plug my Samsung Galaxy S3 at my Probook too. Would be recognizing all of the useful comments!

  Thanx

  Mozz1982 wrote:

  Hello

  I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. ...

  Hello

  How can you insert a memory stick into a USB port? It's physically impossible? Are you talking about a USB / flash / key reader?

  Kind regards.

  Update: I know what you're saying here. USB driver on your computer, copy the following link:

  FTP://15.201.202.83/pub/SoftPaq/sp60501-61000/sp60825.exe

• SDHC SanDisk card reader does not read cards on Windows 8.

  I recently updated to Win 7 to 8, after that my SD card reader is not read maps more. Y at - it a driver update that I can do? I couldn't find one in the sites of Sandisk or Microsoft.

  Original title: Sandisk SDHC card is not recognized in windows 8

  I tried not to the foregoing. But after a windows update over the last weekend, he started to work again.

• 8 GB SanDisk new Clip + does not

  Just got a new SanDisk 8 GB Clip +.

  Plugged into different USB ports for a few hours and tried loading via a power supply.

  All rooms offer zip. The screen is dead and the on/off switch does nothing.

  What's not?

  He got to work by holding down the power button for more than one minute

• SanDisk Ultra II 960 not recognized by Win 10, BIOS sees

  Running Win 10 x 64. Disk management, device management and dashboard of the SanDisk SSD not seeing my 960 GB SSD. BIOS, however. Any thoughts?

  -Chrisbot

  Well, I thought I'd try just swap drives around crazy laughs and smiles and it worked! Problem solved.

• SanDisk Ultra 16 GB not recognized

  I just bought this SD card and my camera Canon says there is no card inserted memory. When I try it on my computer, Windows reports that it is not formatted, so don't give me the possibility of formatting in 32 megabytes?

  Return it as defective.

• First pipette CC 2015 does not not on imac with the Mavericks

  The pipette for any tool with color selection capabilities especially "ultra-key" does not allow me to choose a color.  Color box flashes and then returns a black value when you click it.

  As I said I use mavericks 10.10.3 on a 2011 27 "imac which has an AMD Radeon HD 6970 M to 1024 MB graphics card.  I don't use any external monitors.

  Thanks for any help.

  In case anyone is wondering I finally fixed it.

  I tried trashing preferences, uninstall all software adobe, re - install, CC cleaner, do a utility disk permissions fix and even manually turning all permissions "read and write" and all to no resolution running.

  Then, I ran as a root user and ran to first, magically fixed the problem.  I went back to my normal user and it has always sucked.

  SO, I had to create a new admin user, copy all my files from personal documents, then delete the old user and use the new user as my default.

  Now, everything is good.

• MacBook Pro and SanDisk Ultra II 960 GB does not

  I bought two SSDs to 960GB SanDisk Ultra II for installation in a Late 2009 27 inch iMac and a MacBook Pro mid-2012. I could absolutely not anything other than a white screen on the 27-inch. I could get the external computer to boot via USB, but when it is plugged in SATA, it wouldn't start. OWC had a few caveats on the NVidia SATA bargaining chips down to a 1.5GBs of speed when you try to bind to a 6 G drive. I replaced it with an Electra OWC 3 G Reader (which worked perfectly). I returned the unopened SSD.

  My next goal is to enter the SSD in the MBP. He chips Intel SATA and is not supposed to have bizarre problems. Once again, I have installed the operating system and started via the USB port, no problems. It does not start when installed internally via SATA. If I drill the old HD, it starts immediately. The SSD makes a folder with one? in the middle.

  I have repartioned the reader for Mac. I also tried to clone with all disk utility, same result. I guess I could try SuperDuper or clone of carbon. I just installed another OWC drive in an other iMac and used disk cloning utility, and it worked perfectly.

  I wish that I had bought the OWC drive now, but I'm stuck with this open disk and I would like to make it work. Has anyone else had problems? I think that the drive is bad, but when in a dock player, it works very well and will start the computer via USB.

  When the SSDS was to the iMac 27 inches, she would not even allow the target disk mode, ot any source of start-up. I really thought that the video card was defective at first, but this player has been creating chaos.

  All the words of wisdom are welcome.

  To make a long story short, it's the SATA cable. The computer would boot from a classic HD so I thouhgt the SATA cable was OK.  Apparently, when these cables fail, they can operate at low speed, but there still may not work at all in trying to negotiate a connection with a 6 G SSD speeds. I also noticed that with the wrong cable, the link negotiated with the convnetional reader speed was 1.5 Gbit/s which was lower than expected. I replaced the cable of a reputable vendor and I got another job of SSD. I think the SanDisk that I ended up returning was really beautiful AND compatible.

  I was clued in after a brand that I know with certainty was compatible would not work either. PowerBookMedic sells relaible cables. "cheap" replacements are not recommended.

  Hope this helps someone else.

• XPS8700 does not recognize ULTRA II 480 G

  My Dell XPS8700 desktop computer does not recognize my Sandisk Ultra II 480 G SSD card.  I'm under Win 8.1.  The Sandisk SSD dashboard can't find the SSD drive.  It is connected to the SATA 2 port and I checked the power and SATA connectors.  Any ideas?

  Hello

  You formatait the ssd to the inside of the disk management in order to initialize the disk and create partitions on it, since all SSD come not formatted and you need to format before using them on the computer normally.

• WD Pass Ultra does not connect to MacAIR

  Hello

  I have a MacAir 2012, running the latest software including El Capitan... last night, I have connected my WD My Passport Ultra to the laptop computer and left overnight to back up via Time Machine. In the morning, when I opened the computer not only had the back towards the top do not run, but the drive has ceased to appear in the Finder.

  I restarted laptop, Finder, reset the PRAM and SMC, and tried to open utility disk - which does not start upward and only do so if I disconnect the external hard drive. I have connected the player to a desktop Windows PC and player controls indicate the hard drive works fine. In ADDITION, when you are connected to a Mac the drive spins and flashes indicating power going through so I can not think that it is a cable problem.

  Can someone help me please? Disk utility does not start if the drive plugged in, so I can't unmount/mount... Held the WD driver manager and who is stuck at 90% so I try to leave it overnight to see if that solved the problem.

  Would appreciate any comments.

  Thank you

  Jean-Pierre

  Omaahm wrote:

  Disk utility does not start if the drive plugged in, so I can't unmount/mount...

  I always recommend any new drive formatting, to ensure that all proprietary software are removed, e.g. Manager of drivers WD

  After you start DiskUtility then plug in your WD drive, you can try to force mount

  DiskUtility > file > install

• Why apple does not have a Dual SIM iphone?

  Why apple does not have a Dual SIM iphone?

  I have 2 numbers and one of the members of my family has 4 digits. We both prefer to have an iphone with a Dual-SIM and member of my family would rather have 2 iphones with dual sim each, rather than an iphone and 3 different phones.

  In other words, it would be easier and much better than holding an iphone and another phone for several numbers.

  Is it possible that Apple plans to make iphones Dual SIM?

  Thanks in advance

  While this is a good suggestion, given that the technology could be implemented

  You must lead the effort to the Apple - product return comments, here:

  • Return of products

  Also note unsolicited Apple - legal - political idea of submission:

  http://www.Apple.com/legal/intellectual-property/policies/ideas.html

  Best regards!

• HP ENVY 17 Leap Motion SE: Dual boot Windows 10 with 8.1 - Start menu screen does not always watch.

  I bought the full version of Windows 10 House because I want to keep my factory installed Win 8.1 x 64 and dual boot with the new OS.

  Installation went without problems - on a partition separated after the reduction of the C: partition by default, but when I restart my PC, start menu does not always appear for make me decide which system to choose and the computer boots directly to Windows 8.1.  I even turned off "time to display list of operating systems" when Windows 10 is selected by default OS, but when I turn off my PC for a short period and put back on, I am greeted by Windows 8.1

  Could be a bios or partition related question? Any help is appreciated! Thank you!

  Laptop: HP ENVY Leap Motion SE 17 - j110ea with 2 sata drives.

  Intel Core i7-4702MQ, 8 GB of RAM, with factory installed Win 8.1 home x 64

  VVel wrote:
  

  Thanks for the quick response!

  Workaround1 led display start menu classic that works, but disappears again, after closing down. When I turn on the computer, the last used OS is loaded, without the menu. If I do a restart and not close, the menu is back...

  (......)
  The start menu is not displayed, but at least the OS startup time is faster.

  Hello

  Thank you for posting this and for letting me know it now works for you (which is acceptable to you).

  In fact, what you describe above is not a bug, but it should. This is because Microsoft has changed a bit the boot process and the stop function since Win 8 (which means Windows 8, 8.1 and now 10). Instead of the stop full as in Windows XP, Vista, 7, Windows 8, 8.1, and 10 (when he is chosen to turn off) will stop, but closing them is a kind of hibarnation. For this reason, what describe you above is going on (he begins the latest OS because it was really completely out).  Full done restart restarts and it meets the place where the OS is selected.

  More information-> http://www.techrepublic.com/blog/windows-and-office/how-windows-8-hybrid-shutdown-fast-boot-feature-works/

  This mode ensures a faster start-up (on cause of so-called half restart).

  A workaround for this (works on Win 8, 8.1 and should also work on Win 10):

  http://www.howtogeek.com/129021/how-to-do-a-full-shutdown-in-Windows-8-without-disabling-hybrid-boot/

• Dual-Boot Pavilion dv6 does not work

  Hello

  I bought a Pavilion dv6 with Windows 7 pre-installed. Now I want to dual-boot with Linux (Fedora).

  (1) this laptop has a 500 GB hard drive. So, using diskmgmt.msc, I shrunk the size of the primary partition by about 100 GB. Now, I have that much free space.

  (2) figured out the magic handshake to get the BIOS to run (the F10 hold to power up).

  (3) connected the DVD of the Fedora Installer. He settled in saying that there is not enough space. Tried several options for installation in 'free space' and 'replace existing Linux installation. Same question. Note that I have not yet tried Ubuntu.

  (4) booted back to Windows 7, looked again diskmgmt.msc. I noticed that I have the following partitions. 'System', which is 200 MB (NTFS), player C which is now 351 GB (NTFS), D drive Recovery 13 GB (NTFS), HP tools 103 MB (FAT32). Here are the possible question, all these partitions are listed as "primary". I read somewhere that there may be only 4 primary partitions (it can be extended partitions).

  My questions are:

  (1) is the fact that all primary readers are allocated to preventing me to install a secondary operating system (in this case Linux)?

  (2) if so, what are the disadvantages of the removal of the partition of HP tools (except perhaps less boring tools automatically runs all the time - with no apparent way to stop).

  Thanks for your interest.

  I've heard nothing back for 20 days, which raises the question to know if HP support people even read this, much less provide support on this forum. In any case, I managed to run dual-boot on mine. I hope this helps someone out there doing similar things. Here are the steps that I had to do (and some I do not have):

  1. Created the HP recovery discs... Well I tried to anyway. This process is configured to do one time only. Unfortunately burning failed on the first (I put by mistake a double layer DVD-R in the drive, but the drive itself is supported) and burning failed, but the process seems to still consider that he "get". Bottom line, if I ever corrupted hard drive, I'm out of luck (unless a HP support person has other suggestions).
  2. Bought a 1 TB external drive which has an ESATA interface with intention to save the different partitions of Windows.
  3. I bought Nero 9, which is supposed to make backups. However, he seems to have a bug where it said that I could not make a backup disk of an account that does not have administrator rights. The account I was using has Admin rights, so I guess that the program cannot handle permissions Windows 7 style yet.
  4. Defragmented the big drive (351 GB) C.
  5. Using diskmgmt.msc, used the "shrink" option to reduce its size to 351 GB GB 251, who did not assigned 100 GB on the disk.
  6. Using diskmgmt.msc, assigned a drive letter to the partition of HP tools (see the list of partitions in the previous post).
  7. Using Windows Explorer, tools HP Score Watch now upward because he received a drive letter (it was not visible before). I copied the contents of HP tools in a folder on the C drive, just in case I needed to get it back. It's only a few MBs.
  8. Once again using diskmgmt.msc, deleted the partition of HP tools. This frees up a single primary partition on the disk.
  9. Rebooted the laptop from the Fedora 12 installation disc. Now grub / gparted is happy because he is free to use partition.
  10. Chose to install grub on the MBR, definition of Win 7 as the default bootloader on the player option.
  11. Completed the full installation of Fedora.

• SanDisk Extreme 8 GB does not not in UDMA

  Hello
  I bought a Sandisk card CF Extreme (SDCFX - 008G - X 46, BI100912916B) today and seems that it does not work in UDMA mode. I can read/write it max 9, 5 MB/s in my card reader (and this card reader can read/write 18 MB/sec my Extreme III SDHC card).
  I have a Canon 7 d and it does recognize it as a UDMA card no more. Any suggestions or should I change to a new?
  PS: Sorry for my English

  It's better and more like what you get on a USB drive. to get the full speed of the map, you can use the card adapter Express Pro Extreme.

  copuld you try to return the card, but I'm not sure you'll see different results.

• 64 GB sandisk adapters does not work in the zip clip?

  I bought the 64 Gb Sandisk Ultra adapters for my new sansa clip zip. I can put music on the card with the usb msc mode, but nothing appears in the menus, so I can't get music to play.

  I tried rockbox firmware, but it did not help.

  Can someone help me with my problem?

  It's that I had to download a speacial program to format in FAT32. Now it works fine