041wn for laptop HP 15: disabled code

Similar Questions

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• HP PRESARIO V3000: CMOS PASSWORD FOR HP PRESARIO V3000 disabled system (10945)

  PASSWORD CMOS FOR HP PRESARIO V3000 disabled system (10945). Everytime I open my laptop it calls a cmos password and after several attempts at system was turn off the fact that the code of 10945. What should ba the password for this?

  Thank you

  EDSAR

  @EDSAR

  Enter: eztoyav

  or

  stouzim

  Kind regards

  DP - K

• HP 15-r210dx: System disabled code forgotten BIOS admin password

  I forgot the password for admin to access BIOS. System disable code is 77135872.  Never I would never forget with a mind like a steel trap but, lately, the trap of thinking was rust. Thank you!

  @shortcircut

  Enter 68893274

• CRAVING for laptop - 15-k201tx: download HP Hotkey to URGE support for laptop - 15-k201tx

  HII,

  Where can I download the "Hotkey" to WANT software for laptop - 15-k201tx?

  I already ordered the computer, and it will be delivered over the next 48 hours.

  I have download all the drivers and save them to a disk exernal hard.

  My current laptop (probook) will not allow me to use the shortcuts 'fn' at least I have the software 'Hotkey '.

  I guess that's also the case of jealousy?

  But if I go to the page "Download drivers", it does not show me the possibility to download "Hotkey Support".

  Where can I go?

  PS: I know hotkeys will work right out of the box, and if I recover using the recovery partition.

  I always want to keep a version ALL the drivers in a backup location - in general, I don't use the option 'Recover' for recovery, I reinstall from scratch using my own DVD of Windows and not having a key driver will be a major setback.

  Hello
  
  If the key Action is enabled in the BIOS, you don't have to press the fn key in combination with the shortcut key F to activate or deactivate the appropriate key feature in consumption like logs.
  
  If you need fn + f key to work instead of one F key, disable the Action key
  
  http://support.HP.com/in-en/document/c02035108
  
  There is no separate driver for it.
  
  Concerning
  
  Visruth

• HP laptop: my hp laptop has a disabled system [95933985] entry administrator or power on password

  Hello my hp laptop has a disabled after 3 test. Heres the disable number [95933985] Thank you for the help!

  Hello

  Enter: 20691301

  Kind regards

  DP - K

• Dongles Bluetooth security or Motorola for laptops, pc, Mac, tablets?

  Is there a connection bluetooth or Motorola security dongle for PC, laptops, tablets, and other USB supported technology? The security dongle would not allow the same computer be turned on or implemented before the dongle is inserted.  He needs GPS as an option so the owner can either follow or have the article followed; He must be able to warn the user for Hackers and with options to block and reveal the location of the pirates.   He needs a secure identification of access code or fingerprint. He needs mobile and Parental control at home.  Such security dongle?  I know that there is a LoJack for laptops, can't find it locally so that I can see it demonstrated.

  Hello Joan a. Davis,.

  For that matter, I would say the search in your browser for third-party products that might be able to help with what you are looking for.

  I hope this helps.

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• Windows (Vista) could not search for new updates C800044E error code

  When I try to update windows Vista Home Premium I get: Windows could not search for new updates, error C800044E code.  I need help.  Herm

  Hello
   
  You can use the following methods that can help you solve your problem:
   
  Method 1: Try reseting component of Windows Update and verify that the problem, to do follow below the link which can help you to solve your problem:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us
   
  Method 2:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install the updates and check.

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to solve "System disabled Code 00291"

  HP Pavillion Zd8060USA Llaptop Pentiun 4 HT processor 3.2GHz

  P/N PR315UA #ABA

  S/N CNF5020QT1

  I had entered the password password BIOS enter in the box, then again in the confirmation box.  I stopped and restarted the system and entered the password.  The system would not take the password I just entered.

  I received the error code: "system disabled Code 00291".   I was not able to enter the system.  I released the 100 GB hard drive and replaced by another HD 160 GB that had the original MS Media Center Edition 2005 top and restarted the system.  I got the same error code.

  Please provide instructions on how to start the system.  The system doesn't have a floppy drive.  How can I get the system to set the boot order sequence to leave the cd rom drive and be the first boot device and then Player 8 GB flash as the second boot device, the hard disk as the third boot device?

  No other changes was to the prior agreement of the system to set up the BIOS or security password.

  I tried to password protect the system to prevent my young daughter to access.  She broke down 4 systems in which I had reload and configure each of them. Now, I fell it.

  Please help me! Send replies to [email protected]

  Hi John,.

  You must open a session an official request to support lines HP (phone/email), provide them with a proof of ownership of the product, authority letter and hash code global disable. the post, HP can give you another password that unlocks the BIOS and you can set the password again.

  It will be useful.

  Kind regards

  Waseem,

  I work for HP.

  * Click on the star of CONGRATULATIONS on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Cannot install HP Photosmart 1000, blue screen, stops install to connect USB 2 cable for laptop

  

  Unable to install printer HP Photosmart 1000 to Compaq computer laptop, blue screen appears every

  time that I connect the cable as shown, (USB no problem installing Canon printer via a cable last year)

  The HP Photosmart 1000 printer worked fine on my old computer (XP Home Edition, ed.) pc

  until this pc has developed problems so I need to install this printer HP old (but reliable) for

  my Compaq laptop. HP printer has been connected to old pc via a parallel cable.
  HP printer has not been run on a front USB cable.

  Printer: HP Photosmart 1000, S/N: MX0BG1F2GB MODEL: HP C6723A

  Laptop: Compaq Presario V6700, S/N: CNF8102WLQ, P/N: GT814AV, OS: XP Pro,.

  Two USB ports are 2.0 compatible tested with another printer, scanner and flash

  readers. The two ports operate.
  Tested on scanner (work) USB cable

  So far, I've tried several things:

  Downloaded the latest XP driver from the HP website. (3511_enu_w2k_xp_release.exe)

  (However I do not know what to do with it or where to put it so it can be found by setup.exe

  or regardless of the cd for the printer.)
  I'll never wonder where to find the driver during the installation, because of the blue screen crash

  as soon as I plug the USB cable to connect the printer to the laptop. Even when the printer is turned OFF!

  Disabled antivirus software, firewall (Windows Security Essentials)
  and Malwarebytes... without change any help.

  Ran Check Disk... everything is good.

  Tried to install software without connected printer but when I got to where I was
  asked printer a blue screen again.

  The following information on a blue screen when I plug the USB cable of
  printer for laptop during this installation step and turn on the laptop.
  Then turn the printer on. (HP as directed in instructions to install step by step).
  (also tried plugging in USB cable while the laptop is on but printer is 'no'... blue screen still

  pop up).
  --------------------------------------
  Technical information BSOD:
  Stop: 0x0000007E (0 x 0000005, 0xF7711EC5, 0xF78DA8F4, 0xF78DA5F0)
  Partmgr.sys address F7711EC5
  Base of support to F770F000
  Date stamp 48025360
  -------------------------------------

  Never used it before so I tried the XP program compatibility Wizard I forgot. That fixed the problem with the USB cord. I had downloaded the new driver for XP but didn't know how to use it and could not open or some nomatter what I tried or where I put nothing helped. Installation using old records kept asking for files, that I didn't of course. All tried, you know the drill. Install, uninstall, and more. Went back on Yahoo search (20' e time) and found a score to the HP page where I had downloaded the driver. «How to install «...»» "don't remember that being there when I got the driver downloaded. Then I followed the instructions, once more and double click on the new driver on my laptop and installed like a champ.
  I hope this helps someone else. Too tired, you miss things.

• I have Windows XP 32-bit. Can I do an install clean w / Win7 64-bit? Also, is there a Win7 Pro for laptops?

  Clean installation Win7 Pro 32 bit WinXP Pro?

  HI -.

  I am running Win XP Pro 32 bit on my laptop. I bought the laptop as well as a retinal camera. The company has half partitioned HD for photo capture, but I have never used for this purpose. It is 2G, and since half is partitioned, the thing is full. The ability to restore to the factory settings has been disabled by the seller of the camera. I want to install a new OS so...

  My questions are:

  1 do an install clean w / Win7 64 bit on this laptop? Or is it limited to runing 32 bit only OS?

  2. is there a Win7 Pro for laptops? I noticed on Best Buy description a (PC) listed after the name: Windows 7 Professional (PC).

  Thank you very much! I want to install electronic medical records and I need the new OS wrong!

  Rebecca

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  See also:
  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• How can I Cancel two step for my email account security code?

  How can I Cancel two step for my email account security code?

  Now, to see if you can always reactivate this account, the only thing you can do is:

  • Go to Hotmail and try to connect with it.

  • If you can, then you have this back.

  That's how Hotmail determines if or not someone really changes their minds when they disabled or abandoned an account. All you really need to do is log in there, using the web interface, and if she comes back, fantastic.

  If the connection fails

  If you cannot (in other words, if the connection fails), this means that one of two things:

  • One, the account itself is really deleted - and there is no e-mail address of the same name

  • Or it means that the e-mail address was finally released, so that it can be reused by other people and someone else took.

  Now, the only way to determine whether or not this is the case is here:

  • Try and create a new Hotmail account with the old email address. If it works, you're back in business.

  • If it fails, I don't know how to get this email address.

  As I said, it could very well have been reassigned to someone new who came and chose as their new email address on Hotmail.

  ----

  However, you can try to talk to Microsoft about this page: support.microsoft.com/contactus

  Choose the 'Chat now for general information", enter your name and choose the option"Hotmail"for the reason.

• I have cs5 on my home mac. I had it on my old mac laptop. I disabled it is then rendered to reinstall on my new laptop and my serial number does not work. Any help?

  I have photoshop CS5 extended on my Mac at home. I also had it on my computer mac laptop. I disabled it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?

  David o "bryan do you migrate/transfer of files/folders/applications for the new laptop Mac?  You can check that your serial number is valid by checking your account on http://www.adobe.com/.  You can find more information on how to locate your serial number to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.