1 h period and the time dimension

Similar Questions

• Hour/Min column in the Time Dimension

  Please can someone help me with the script to fill in the time Dimension Table that contains a column of hours/min. Here's my Time_D structure:
  
  Year
  Quarter
  Month
  Name of the month
  Week
  Day
  Hour
  Min
  
  Also is it a good practice to have the hour/Min column in the time Dimension?
  
  
  Thanks in advance.
  Concerning
  B

  B,
  Sorry if I confused things a bit...
  I wanted to say in the MDB layer, you can model a dimension table (time) with the path complete drill (year-> quarter-> month-> day-> hour-> Min)
  This a logical table would have two sources of logical table to map required fields of your two tables of phyiscal (Date_Dim and Time_Dim)
  You must define the levels of content accordingly for each logical table source, so the user in responses can perfectly break of the year all the way up to Min, their sound a single dimension, actually its two tables and the BI server switches according to the levels of content in the LTS.

  Sorted?
  Let us know if you get the probs.
  Alastair

• Add the quarter to the time dimension

  Hello
  
  We have created a time dimension using the owb wizzard, but did not include the quarter level. Is it possible to add it to the dimension later without deleting a re-creation of the entire dimension?
  A new time dimension would probably be corrupt all the cubes (data and metadata), so I would avoid that.
  Any ideas?
  
  See you soon,.
  
  Knut

  Hi Knut

  Yep, should be possible.

  Change the dimension and select the quarter level in the levels Panel, and then click quarter in hierarchies pane to add it to the hierarchy. You can then delete the link and autobind on details for the physical links to the underlying table. On the hierarchies pane, there is a button "Create map" that will regenerate the mapping to load the time dimension.

  See you soon
  David

• How to create the time dimension?

  Hi friends...
  I'm working on OBIEE since the last 2 months.
  I created a few reports; I don't have the time dimensions in the layer of MDB.
  
  Now, I need to give a few zoom feature in my reports. Almost all of the reports have the time factor.
  As year, month, and day. can I still create the time dimension based on the exercise.
  (1) what is - that I think give the zoom feature in the reports.
  (2) can we have multiple time dimensions in the MDB layer?
  
  
  Thank you very much in advance.

  Toony,

  You can create a time dimension based on the fiscal year, and you can have many dimensions of time within a business model. There is a lot of documentation, of messages and articles about dimensions. If you haven't already done so, check out page 126 of the Server Management Guide and read this article. That should at least help you get started on building your time dimension.

• How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  I already did it.  The time is displayed in the correct format, but I can't seem to view the date of

  Any other suggestions?

  Thank you

• Rearranging 'Period' in the column dimension

  Hello
  
  In most of my data forms, I have the period in the column. My time dimension hierarchy is
  
  YearTotal-> HalfYear1->->-> Wk1 Jul Quarter1. Its custom with 52 weeks period character.
  
  The user wants neighborhoods to display in the data forms after every month. As
  July, August, September... Apr, may, June, Q1, Q2, Q3, Q4, YearTotal.
  
  I use "Descendants (Q1), Descendants (Q2), Descendants (Q3), Descendants (Q4), Q1, Q2, Q3, Q4, YearTotal" in the size of the column. But still it does not display the form that the user wants. It shows me as
  1st quarter (+), T2 (+), (+) T3, T4 (+), YearTotal.
  
  How can I design the data form so that the form is displayed as the user wants?
  
  Kind regards
  Brig.

  Hello
  Have you tried adding a second column to your form and put the quarters for the second column?
  Who could do.

  See you soon,.
  Alp

• Use 6 s more: iPhone battery is not displayed and the time standby and use are the same, even I do not use it

  Hello. I just bought an Iphone 6s MORE and just updated to iOS 9.2 and I had this problem with applications that consume my battery is to say the list of applications that drain the battery does NOT appear when I click on settings > battery. And also I meet another problem that is my standby and usage time appeared at the same time even if I SLEEP there during the entire period. Someone of you this problem? If yes kindly share here how you can solve the problem

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again.

  You won't lose data, but which can cure some problems after installing new software.

  The same use and waiting time is a sign for some applications, always running in the background, even when the phone is in standby. Restart will force close those apps.

  The list of applications appears only when you used some applications for some time.

• Best practices for the Time Dimension

  I'm a new contour design. I need to set up a time for daily dimension, perpetually. In the past I would set up a member years i.e. 2010, 2011, 2012... and a second dimension with the days i.e. Jan 01, 02 Jan.
  
  Is there a better way than that? I would like if possible do so in only one dimension.

  Have you looked at the Date-Time dimension? It's ASO-only, but has a ton of features:
  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/eashelp/frameset.htm?sel_cal_hier.htm

  He put everything in a single dimension, btw. I've seen similar dimensions in cubes BSO stored in sparse form. Shudder.

  Kind regards

  Cameron Lackpour

• Pulse ultrasonic 40 kHz and the time before receiving the pulse.

  Hello

  I developed the following circuits:

  TX: a Circuit that generates a 40 kHz of frequency using a LM555, the LM555 is connected to a gate AND who, when you use the test on MyDAQ Panel (6216) I put cntr0 and set it to the detection of edge I can count the number of detections of edge when I activate the port up and when I turn it on it low stop recording of the counties.

  Rx: Reception Circuit contains an op amp that is introduced in a LM567CN tone decoder which is set at 40 Khz. when the receiver PLL circuit locks on the 40 kHz signal switches LM567 pin 8 output ground.

  Question: I am NEITHER very new and ask yourself where the starting point would be to create a VI that will trigger the Tx circuit, and then measures the time required for the circuit of Rx to receive the signal, this intitial will carried out through the air and then I want to move it through a meduim such as water. Someone at - he tried or seen anything that would be useful to create a vi that correspond to this.

  Any help would be greatly appericated.

  Phil

  Using a myDAQ or a 6216?  You mentioned the two... I'll assume 6216:

  You'll want a task of separating two edgeand also a task of digital output.

  The digital output control signal enable for the LM555.  Connect from the digital output line at your door AND as well as a PFI lines on the 6216 (this will be the "first" edge).  Connect pin 8 of the LM567 to a different line of the PFI on the 6216 (the 'second' edge). You can configure the polarity up/down via the Create channel VI (looks like your second advantage is going to be 'falling').

  Programming would be as follows (in order):

  1 configure the tasks as shown in the related examples (i.e. channel to create / configure synchronization).

  2. start the task of digital output.

  3. write the 'low' digital output to ensure that it is initialized.

  4. start the task of separation on both sides (it should be buffered as in the example linked even if you are only reading a sample).

  5 write the digital output 'high '.

  6. reading (a sample) the task of separation on both sides.  Specify a time for read long enough to ensure that the falling edge is considered.

  7. write the 'low' digital output (assuming that you want to disable the Tx when you are finished with the test)

  8. stop and disable the two tasks.

  The measured result will be a 12.5 ns resolution using the time base 80 MHz by default on the 6216.

  Best regards

• VISA series and the time elapsed in a timeout

  Hi people,

  Still new to LabView, please bear with me...

  I have a VI that is sitting and wait a certain string of characters arrive on the port series, but I need a timeout that is not based on the VISA expiration time.

  I expect a bunch of text via the serial port for ~ 45 seconds, then my input string will compare the matched string and move to the next VI.

  In case of no matching strings, the serial port can continue to send data serially, or may be inactive (no-determinisitic because this test is to see if a computer system started successfully). But once the VI starts, I should have 60 seconds to find the match, or set the bool 'selection' to fail.

  I tried to put my loop of time inside the main loop, outside, with or without SRs, and now I am at a loss. I looked at the VI has highlighted and the serial activity is active the timer has expired for 60 seconds.

  Please take a look at the joint and thanks for taking a peek at this post.

  I'm not entirely sure I understand what you are trying to accomplish. However, here are my thoughts:

  1. You have attached the VI waits 60 seconds before checking the serial port for waiting bytes ONCE then read bytes if available and leave immediately. It's because you have while the loop around the elapsed time and it should run completely before moving on to the serial communication loop.
  2. I assume that you have configured the port series and characters of endpoint set, etc. in a main vi
  3. Please try the VI updated seal and let us know if this helps

  Thank you

  Charles Chickering

• How can I increase my download time and the time of answers to a test?

  I need to fill out an evaluation test for a job that I applied recently. It requires some time to download and the response time. Can I make changes to my PC to reach the speeds necessary?

  Your internet connection is controlled by your ISP, you should ask them, but I doubt there is anything that they (or you can do it) to speed it up

• my the time display on my emails and my display system and the time is not... an off hour... how reset?

  new computer... email recd time and time is an hour earlier that the time is displayed on my system (lower right corner) and at the same time on the icon weather is an hour later.  I suggested by my internet proider contact you.   Thank you

  Click on the date and time in the corner of the screen to the right, then click on change settings of date and time.  You will probably need to set the appropriate time zone.

  Good luck.

• How to reorganize the POV and the Page dimensions in a data form?

  version 11.1.2.3

  I have built my forms of data but want to rearrange the dimensions within the page selection while keeping my choices.  I can't drag and drop, right click and move up or change the section.  I can move upward members individual in a dimensions however for the page, but not the dimensions themselves.

  You can drag a dimension out of the section POV or PAGE (in another section) and bring her back.  It will be added at the end.  Drag in and out of dimensions until you have the desired order.

  Hope this helps,

  -Jake

• Muse sensitive breakpoints and the time download

  Hey guys

  I'm using the new feature with the breakpoins to a respoinsive site (and its great)

  After I have upload the site on the server im having a problem that the site is really slow download (take it more photos then 10 sec)

  little help from a friend, I checked the loading time of everypart of the location and the apperently load together all breakpoints (I have 7 break points for her im like 7 loading sites)

  you have a function or something (like css support queries) which loads the relevant width size every time or something to fix this?

  Thank you very much

  Adam

  You discuss the new draft version of Muse in a public forum. Details of the draft are still covered by the agreement of non-disclosure admitted to participate in the beta program. Please repeat your request to http://museprerelease.com

  Thank you.

• How can I turn off date stamp and the time in the comments

  I have a laptop and need to turn off the stamp tme and date in the comments is it possible?

  The purpose of the hour and the date is to allow the chronological classification of the comments. Because date timestamp is based on UTC and the displayed value is adjusted to the local time zone, this could be a handy feature for certain documents that could help to establish when something has been done.

  There is no way to the turnoff to the timestamp date of comments. You might be able to use JavaScript to manipulate the properties of the comment.