1 of 4 USB is Kaput, Help please...

Similar Questions

• recently installed xp pro but can't find driver for usb controller any help please model nx6325

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  Welcome to the HP Forum!

  edgeville wrote:

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  All the Windows drivers for your laptop are on Portal support business web users for your laptop HP. In the drop-down list, select Windows XP. It's an operating system supported so reinstall drivers.

  Check the Basic Input/Output System (BIOS) for Legacy USB Support. To do this, follow the procedures below:

  1. Restart the computer.

• Printer USB problem. Help, please

  Hi all
  My Win XP SP3 suddenly developed an error when I try to print: failure of the Document to print - communication error with the printer.
  Canaon printer - Pixma MP 610 - is 6 months old who until then worked very well.
  Panel displays printer as Offline as a default state. Right click and selecting put printer online do so much and then it is listed as ready but still does not print.
  The following does not help:
  Printer off/on switching voltage
  Unplugging and reconnecting USB cable windows says new hardware detected but it it lists as material not recognized. Try to install the driver of the .inf - windows says no driver found which is compatible with this unit.
  Restart the computer
  unintalling / reinstall drivers - printer is listed but grayed out as default in offline mode.
  does not print BACK or any Notepad program Inc.
  Went and bought the new printer and new wasted money - same problem - hardware not recognized - USB cable.
  Printers are good and works very well when it is connected to the other comps.
  Tried the fix to MS site http://hotfixv4.microsoft.com/Windows%20XP/sp3/Fix144808/2600/free/226205_ENU_i386_zip.exe) - no help.
  In manager\hardware - listed as device not recognized - printer device refuses to update driver as said earlier, even through the .inf file
  In the printer properties verified that USB is not going into sleep mode - without help.
  Activated: Services\PrintSpooler - Running - restart - no help.
  Edited register: 'Create a new registry value that prevents an OHCI controller to enter a suspended state' - help
  ALSO; computer does not recognize now of any memory stick when connected USB
  USB only sees the mouse and a card reader.
  All USB hubs are listed as working normally in yellow device manager-no icons anywhere Device Manager.
  All windows update drivers are up to date.
  Help me please if you can I am at my wits end.
  Thank you United Nations advance regards
  Bayan

  Bayan,
  Hi, the same thing happened to me last Friday, 20 November.

  the differences are:-
  1. I use HP 7590 printer;  and
  2. the poster as "Unknown device" and that no driver usb device is loaded...

  You solved the problem?
  Thank you
  Ursula

  JohnKelly46 had the answer - he said to unplug the computer's power supply. He said you have to unplug the notch decision-making and wall. [just turns off the computer is not enough.  Wait a few minutes. Then, connect the power supply to the computer.  Once windows started, everything reinstalled one by one.

  ... see pls detailed response from John to wire "USB drive is not accessible"

• Windows Vista does not respond after the removal of a usb device! HELP Please!

  I have windows vista for my PC and I noticed that most of the time when I remove a usb device, the computer is unresponsive and crashes on me shortly after. And I won't have any choice but to cut the main power supply if the computer shuts down. I know that this cannot continue and will eventually damage the computer. Is there a solution and why this can happen?

  Hi ClaudL,

  1. this happens with all type USB devices?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Does not my wireless connection using one of Belkin USB adapter. Help, please!

  I have a Belkin F9L1101v2. He used to work, but recently he has not worked at all. I am able to connect to the wifi, but I get no internet access. Convenience store, said "the link between your access point, router, or modem cable, and the internet is broken." I worked for hours trying to solve this problem, but nothing really seems to work. Would be very happy for any help!

  1. how you connect to the Internet to ask your question?

  2. the Belkin F9L1101 does not connect to the Internet.  It connects via WiFi to your router or wireless access point.  What means the error message.  What is the brand and model of your access point wireless, router or wireless gateway?  If you have another cable or DSL modem, what is the make and model of this device as well?

  3. on the other hand, the error message may be wrong.  How do you know that you can "connect to wifi?

  Is the light on the F9L1101, flashing, or disable?
  Open Device Manager (type devmgmt.msc in the start search box and press enter).  All entries show a caution icon?  If so, which?
  Follow these steps:

  • Open a command prompt window (type cmd in the search box and press enter)
  • In the black Promt command window, type the following command and press ENTER after each line:
    ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
    Notepad '% userprofile%\Desktop\ipinfo.txt '.
    output
  • Copy and paste the contents of the ipinfo.txt file into your next reply here.  If you use another computer to post your questions, use a USB flash drive to get the file from the desktop of your computer problem to the computer you use to access the Internet

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• For some reason, none of my 3 USB keys on my laptop recognize any connection. Help, please.

  It is a follow-up question. My external drives appear in the section work stations. I can access them by along w / the files on it. It's a question that when I'm going to try to send items to readers (all 3 ports) do not recognize that there is a link there. Then, when I click right on and down to ' send to ' drives external hard for these ports (3) none of them don't introduce yourself here indicating that there is a drive attached to it. Therefore, I'm unable to send files to / them. Any port I use at this time.
  Is there a place in my computer, where I have a check to see if I have inadvertently disabled?

  It is a supplementary question that I asked yesterday. Involving essentially the same thing. Then I asked how to send files to my external as disc it does not see the the "send to" when right-clicking. I received a reply and it worked. But it is simply to create a shortcut for the command in the file send to.

  Since I have now come to realize that this is a problem w / all my readers and it's true, create shortcuts for each reader, that I finally hang up the USB hubs will work, it's kind of just put a bandage on the main issue. Problem being, why aren't my grateful USB keys when there is something related to them.

  They have worked in the past. And the only way that they recognize that everything is connected to them is now for me to create a shortcut in the folder send to. Once again, the problem is with Ports USB works not as it should.

  Help, please.

  Thank you

  Hello

  I suggest you to follow the steps described in the article below and check if it helps:

  http://support.Microsoft.com/kb/871233

  So that above article applies to Windows Vista.

  I hope this helps.

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• Help please: View 5 will not redirect USB HID (digital scale)

  Hi all

  We use View5 in a trial now and are very close purchase but we have 1 thing that prevents us from doing. I can't redirect a USB audio device. In this case, it's a digital scale used for UPS worldship. I tried this KB, and it has not worked for me so far. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1011600

  Please see attached screenshots of registry and Device Manager where the VMware View Client is installed. Help, please.

  On your screenshot, it looks like you have set incorrect registry value. It should simply be VID_0B67 & PID_555E, but you have added an additional suffix.

• Help, please! File corrupted on USB!

  Dear ladies and gentlemen,

  I am the a professional graphic designer currently used by the MLSIQ Solutions. I was working on a very important project and have done a little. I saved and saved, etc. But a participation rate very unhappy of events that happened.

  The project was saved on a USB key. He pulled the computer that I was SAVING the document to my office, and because of this event suddenly I ACCIDENTALY saves the file in photoshop as a .com extension!

  Now when I try to open it, it opens in the command promp and does nothing!

  Can someone tell me please how to bring in .psd format?

  
  NOTE:

  The USB has failed because it was torn, and all the data disappeared.
  Rename the .psd file create a photoshop file, but that does not open.

  Help, please

  No worries, and you're welcome.  I'm just happy to have been able to help you recover your file.

  -Christmas

• My new helmet from QY8 does not connect to my iPad. Help, please.

  MY new QY8 is not tapered to my iPad. Help, please.

  Note:

  1before using the headset, please use the USB charging cable to charge everything first.

  2.pairing, press the power button on the headphones, you will see the flashing light blue-red, it will automatically switch mode pairing.

  3. If still cannot contact, please pluging in the charger cable to the headset Bluetooth, then connect to the USB port on the computer. To the loaded state, press the power button on the headphones until the red and blue lights flashing, remove the name of Bluetooth pairing. Finally, please contact your headset with headphones.

  4. make sure you turned on the bluetooth on your phone, model of research on this helmet.

  5. Select the Bluetooth model and click on connect. Enter the password or code 0000 if necessary.

  http://www.coulax.com/product/COULAX_V4_1_Bluetooth_Headphone_E257-4.html

• HELP Please: can't find missing drivers on the HP website

  My computer is missing 4 drivers (network controller, Ethernet, PCI device and SM bus controller controller), including the first two (I presume?) stop to connect to Internet.
  I downloaded what looked like the appropriate drivers for the ethernet controller network off-site Internet HP on another computer and transfer files with a USB key.
  Then I opened the files and everything seemed to go well - installation wizard arrives, I accept the user agreement, it seems to start updating - when he suddenly stops and a notification will appear that says "your system does not meet the minimum requirements for this update. Update has been canceled. (9996).
  
  I would like first of all to understand what are the requirements may not be satisfied with my computer, and then how to find exactly the right drivers necessary to connect to the Internet.
  
  I'm running a new (although not the latest version) copy of win7 and have a new hard drive which I assume is at fault for missing drivers. It is a g6 - 1232ea portable Pavilion.
  
  Help, please. See you soon.

  You are the very welcome.

  Yes, you can download on another PC.  Just download and copy on a USB or burn it to a DVD.

  Here is the link for the driver for the wireless card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105197-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197301 & sw_lang=.