10.0.1 to 10.1 will not apply the update

Similar Questions

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• My computer will not complete the update

  I've updated my computer tonight and after the reboot. Until I can connect the "configuration of updates: stage 3 of 3" came, as usual, but this time he remained at 0% for a few seconds and then the computer restarted again. It always restarted it self shot 10 times until I forced to close. Cannot start without failure or something.

  
  

  What should I do?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If above does not solve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My firewall of Windows 7 will not take the updates more

  How do update you my Windows Firewall that stopped taking updates?  Sound not to get your updates.  How can I solve this problem?

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  The Windows Firewall doesn't in any way requires any maintenance feature.

  If you are referring to Windows Update.

  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Lightroom will not apply the changes to all my pictures until the preview icon is visible in the active window in grid mode

  Hello

  I have about 4000 photos taken with my GoPro I would use a Time lapse video.

  I decided to correct the colors first, so I imported it in LightRoom. I have made changes to the first image, selected images (ctrl + a) and click on the sync button.

  Now, the weird thing is that I made to the first image doesn't apply to the rest of the images if I display of the thumbnail in the library grid mode view.

  For example, I will scroll to a random part of the grid of images and preview images show the original image. After a few seconds, the previews will be all up to date with changes made to the first image.

  Even tried exporting as tab video slide show to see if the changes have been made to all photos, but that reflects not only the icons - no dice. Any input would be much appreciated!

  Thank you!

  I think it is a bug specific to slide show > video Export.  I tested with 5800 1000 x 750 in double JPEG format, change the exposure of the first to be very dark and synchronization so that change to all others.  When I exported all 5800 photos in a folder, they all had the exhibition has changed; Ditto when I did slide show > export as PDF.  But when I did slide show > export video, I observed the same symptoms that you have done: only those photos that I had actually seen thumbnails in library obtained grid view the correct exposure setting in the video.

  I recommend that report you this bug in the official Adobe feedback forum, where Adobe has asked that all the deferred bugs: Active recently in Photoshop on Photoshop Lightroom family.  Don't forget to include a detailed step by step recipe to reproduce the bug.  Adobe tends to not pay attention to the reports for which they are unable to reproduce the symptoms quickly.

• Strange icon that will not allow the update to Adobe Flash Player 17 for mac

  When I download the most recent Adobe Flash update for mac I have a strange icon.

  

  When I double click to launch the update file, I get an even weirder window full of gibberish.

  If anyone has any ideas or suggestions, I'm open. I went through each help file I can find for Adobe and nothing has helped so far.

  Hi Threigia,

  Remove the .mdlp of file name, so that it ends just .dmg.

  We are seeing this behavior with users who have installed of MathLab and we look at why this is happening.  FWIW, this happens to other software THAT DMG files as well, not only the installer of Flash Player.  For some reason when users have installed, MathLab when the DMG file is downloaded, it adds the extension .mdlp for her.  When users try to run it, rather than open with DiskImageMounter, which is what OS X uses to open DMG files, it opens using MATLAB and the result is what you posted.  In this case in the future, simply remove ".mdlp" from the file name and DiskImageMounter will open the DMG, instead of Matlab.

  --

  Maria

• I've updated my adobe plugin but FF continues to turn off and will not perform the update. I can't use FF if it maintains this doing.

  I have an error message and cannot play the videos on yahoo and a variety of sites. I click on FF to check the updates, but it gets stuck 'connection with mozilla '. I like FF, but I have no time to solve such problems.

  Hello phxpuma, adobe has released a critical fix for a vulnerability in its version of the flash plugin, which is apparently already exploited in the wild. That's why firefox will block the precarious versions which run by default on Web sites for your protection. https://helpx.Adobe.com/security/products/Flash-Player/apsb14-27.html https://addons.Mozilla.org/Firefox/blocked/p794

  Please update Adobe Flash Player version 16.0.0.235 as soon as possible, that you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin-based browsers).

• My computer will not install the update for SQL server service pack 3 (970892), why?

  Whenever I try to install the update I get the message not was restored.

  Try this forum:

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• My computer will not install the update of security for Windows Vista (KB2688338)

  The update starts normally say "create a restore point. Then he said: "some updates were not installed.

  I get the error code is:
  Code: 80070002

  Here's a good link for the specific error code you get:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Script will not apply the paragraph style

  Hello

  I'm new to scripting in InDesign (CS3), and I'm trying to understand why the scipt below does not apply a style in the following text file? :

  < ASCII-WIN >

  < ParaStyle: Heading 1 > who are we? < ParaStyle >:

  For ease of reading, I have shortend the text file to just two lines.

  The script that I use to open and to format the text file is:

  Create a new document.

  myDocument var = app.documents.add ();

  Set the units of measure and the origin of the rule.

  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;

  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;

  myDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;

  Get a reference to the first master spread.

  var myMasterSpread = myDocument.masterSpreads.item (0);

  Get a reference to preferences on the margins of the first page in the Master spread.

  var myMarginPreferences = myMasterSpread.pages.item (0) .marginPreferences;

  Now set up the page margins and columns.

  myMarginPreferences.left = 4;

  myMarginPreferences.top = 70;

  myMarginPreferences.right = 70;

  myMarginPreferences.bottom = 78;

  myMarginPreferences.columnCount = 2;

  myMarginPreferences.columnGutter = 14;

  The margins of page and columns for the right-hand page.

  var myMarginPreferences = myMasterSpread.pages.item (1) .marginPreferences;

  myMarginPreferences.left = 48;

  myMarginPreferences.top = 70;

  myMarginPreferences.right = 70;

  myMarginPreferences.bottom = 78;

  myMarginPreferences.columnCount = 3;

  myMarginPreferences.columnGutter = 14;

  Adding Master Page items

  var myMasterSpread = myDocument.masterSpreads.item (0);

  var myLeftPage = myMasterSpread.pages.item (0);

  var myRightPage = myMasterSpread.pages.item (1);

  var myLeftFooter = myLeftPage.textFrames.add ();

  myLeftFooter.geometricBounds = [70, 742, 728, 528];

  myLeftFooter.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myLeftFooter.contents = SpecialCharacters.autoPageNumber;

  myLeftFooter.parentStory.characters.item (0) .pointSize = 11;

  myLeftFooter.parentStory.characters.item (0) .leading = 14;

  var myRightFooter = myRightPage.textFrames.add ();

  myRightFooter.geometricBounds = [48, 742, 728, 542];

  myRightFooter.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myRightFooter.contents = SpecialCharacters.autoPageNumber;

  myRightFooter.parentStory.characters.item (0) .pointSize = 11;

  myRightFooter.parentStory.characters.item (0) .leading = 14;

  myRightFooter.parentStory.characters.item (0) .justification = Justification.rightAlign;

  Adding master text frames

  var myLeftPage = myMasterSpread.pages.item (0);

  var myRightPage = myMasterSpread.pages.item (1);

  var myLeftTextFrame = myLeftPage.textFrames.add ();

  myLeftTextFrame.geometricBounds = [70, 70, 714, 528];

  myLeftTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myLeftTextFrame.textFramePreferences.textColumnCount = 3;

  myLeftTextFrame.textFramePreferences.textColumnGutter = 14;

  Add a label to make the image easier to find later.

  myLeftTextFrame.label = "BodyTextFrame";

  var myRightTextFrame = myRightPage.textFrames.add ();

  myRightTextFrame.geometricBounds = [70, 48, 714, 542];

  myRightTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myRightTextFrame.textFramePreferences.textColumnCount = 3;

  myRightTextFrame.textFramePreferences.textColumnGutter = 14;

  Add a label to make the image easier to find later.

  myRightTextFrame.label = "BodyTextFrame";

  Link the two frames using the nextTextFrame property.

  myLeftTextFrame.nextTextFrame = myRightTextFrame;

  The substitution of Master Page points and adds text

  var myTextFrame = myDocument.masterSpreads.item (0).pages.item (1).textFrames.item (0) .override (myDocument.pag es.item (0));

  Add text by setting the contents of the insertion of a string.

  In JavaScript, "\r" is a return character.

  .silence myTextFrame.insertionPoints.item (0) = "dok\r";

  Adding and applying a paragraph Style

  var myParagraphStyle = myDocument.paragraphStyles.item ("title 1");

  try {}

  var myName = myParagraphStyle.name;

  }

  {} catch (MonErreur)

  //The style of paragraph don't have not exist, so create it.

  myParagraphStyle = myDocument.paragraphStyles.add ({name: 'Title 1'});

  }

  We need to create a color. Check if the color already exists.

  myColor var = myDocument.colors.item ("Green");

  try {}

  myName = myColor.name;

  }

  {} catch (MonErreur)

  //The color have not exist, so create it.

  myColor = myDocument.colors.add ({name: 'Green', model: ColorModel.process, colorValue:[100,0,100,0]});})

  }

  Now set the formatting of the paragraph style.

  myParagraphStyle.appliedFont = "Arial";

  myParagraphStyle.fontStyle = "Bold";

  myParagraphStyle.pointSize = 24;

  myParagraphStyle.spaceAfter = 24;

  myParagraphStyle.spaceBefore = 24;

  myParagraphStyle.fillColor = myDocument.colors.item ("Green");

  Apply the style to the paragraph.

  myDocument.pages.item (0).textFrames.item (0).paragraphs.item (0) .applyParagraphStyle (myParag raphStyle, true);

  You can also use:

  myDocument.pages.item (0).textFrames.item (0).paragraphs.item (0) .appliedParagraphStyle = //myParagraphStyle;

  Import a text file

  Display a standard dialog box open the file to select a text file.

  var monFichierTexte is File.openDialog ("choose a text file");.

  If you selected a text file, and if you didn't press Cancel,

  Place the file of text on the first insertion point after the title.

  If ((monFichierTexte! = "") & & (monFichierTexte!) (= null)) {}

  myTextFrame.insertionPoints.item(-1).place (myTextFile);

  }

  Place a graphic

  Display a standard dialog box open the file to select a graphic file.

  var myGraphicFile is File.openDialog ("choose a graphic file");.

  If you have selected a graphics file, and if you didn't press Cancel,

  Place the graphic file on the page.

  If ((myGraphicFile! = "") & & (myGraphicFile!) (= null)) {}

  var myGraphic = myDocument.pages.item (0) .place (myGraphicFile);

  //Since you can place multiple graphics at once, the place method

  //returns a table. For the graph you have placed, get the first

  //item in the table (beginning of JavaScript arrays with element 0).

  myGraphic = myGraphic [0];

  //Create a style object to apply to the graphic image.

  var myObjectStyle = myDocument.objectStyles.item("GraphicFrame");

  try {

  var myName = myObjectStyle.name;

  }

  catch (MonErreur) {}

  //The an object style have not exist, so create it.

  myObjectStyle = myDocument.objectStyles.add({name:"GraphicFrame"});)

  }

  myObjectStyle.enableStroke = true;

  myObjectStyle.strokeWeight = 3;

  myObjectStyle.strokeType = myDocument.strokeStyles.item("Solid");

  myObjectStyle.strokeColor = myDocument.colors.item("Green");

  //The frame containing the graphic is the parent of the graphic.

  myFrame var = myGraphic.parent;

  myFrame.applyObjectStyle (myObjectStyle, true);

  //Resize the frame to a specific size.

  myFrame.geometricBounds = [0,0,600,600];

  //Fit the graph in the image proportionally.

  myFrame.fit (FitOptions.proportionally);

  / / Next, mount the frame to the resized image.

  myFrame.fit (FitOptions.frameToContent);

  var myBounds = myFrame.geometricBounds;

  var myGraphicWidth = myBounds [3] - myBounds [1];

  //Move the graphic frame.

  var myPageWidth = myDocument.documentPreferences.pageWidth;

  var myTopMargin = myDocument.pages.item (0).marginPreferences.top;

  myFrame.move ([myPageWidth-myGraphicWidth, myTopMargin]);

  //Apply a wrap to the graphic frame.

  myFrame.textWrapPreferences.textWrapType = TextWrapTypes.boundingBoxTextWrap;

  myFrame.textWrapPreferences.textWrapOffset = [12, 24, 12, 24].

  }

  I hope someone can point me in the right direction.
  Thanks in advance.
  Ron

  Hey, Ron.

  The problem has nothing to do with your script. You can see if you attempt to place the file from indesign tagged text by hand.

  Your instinct for divide and conquer for debugging is a good - have a short text file to work with is very useful - of course this is also true for the script.

  During the validation of the scripts on the forum, please do not use the syntax insert > feature Java which lies behind the > arrow in the toolbar. Otherwise, cut and paste your script are difficult requiring manual corrections.

  Anyway, your problem is that each paragraph can have only a single paragraph style, and it's the last one that you define.

  So in your IDTT file, you set the heading 1 paragraph style, enter the content of the paragraph and then set the style of paragraph votes to zero.

  If you have included a line break before setting the style of paragraph votes to zero, you must set the None style for the following paragraph. But since you have not, it resets just the style to the current paragraph.

  In short: success back before .

• My system will not recognize the update 15.1

  I'm working on a series of systems, some with Maverick, some with El Capitan and Yosemite. Most of my systems easily set updated to 15.1 while others (not having nothing in common with one another) don't see 15.1 as an update. What gives?

  Hey Brock,

  Here is the direct link where you can download new updates of all creative applications Cloud 2015 for Windows and Mac OS.

  Please do not forget to follow the "important Instructions" on the page (required by Adobe) for direct links work.

  2015 all updates of Adobe CC: directly download for Mac OS links | ProDesignTools

  2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools

  Kind regards

  Navdeep Pandey

• Options will not keep the update page to display my chosen homepage

  Why browser keeps showing 2 tabs? One is the update page and the other is my chosen homepage. I tried the options but it doesn't work.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• System will not install the update for Microsoft Silverlight (KB2526954) how can I say no to this update so stop it trying to install it?

  I keep gettinError code 670. I tried to find the disc problem, but can't work around that. I want to stop trying to install this update of the system.

  Hi DeliaYeager,
   
  -Are the other updates, proceed with the installation without any problem?
   
  Try to download and install the latest version of Silverlight and check if this may help.
   
  For the latest version of Silverlight, visit the following link:
  Download Microsoft Silverlight
   
  For more information on this update, see:
  Description of the update for Microsoft Silverlight: 19 April 2011
  You can also post your request in the Silverlight Forums for assistance.
  Installation and configuration

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety