1034 error connection received on the eve - yes another

Similar Questions

• Logging of 1033 errors received on the eve

  Hi oracle gurus.

  our oracle RAC 11 g R2 version.

  There is a gap of archives between primary and standby.

  "after investigation, in the primary alert log classify his writings under."

  Logging of 1033 errors received on the eve

  Heartbeat PING [ARC1]: Unable to connect on the eve "testdg. The error is 1033.

  "

  I checked the status of the listener, services are running, I was able to connect on the eve of the main database. Could not find the solution.

  Thanks in advance.

  Kind regards

  REDA

  I use the alias tns for my settings. I have my old 2 nodes, the following:

  standby1. LOCAL_LISTENER = listener_standby1

  standby2. LOCAL_LISTENER = listener_standby2

  I don't have the IP addresses of these parameter values. Here are a few tnsalias. Then in my tnsnames.ora Configuration file, I have these:

  LISTENER_STANDBY1 =

  (ADDRESS = (PROTOCOL = TCP) (HOST = host01-vip)(PORT = 1521))

  LISTENER_STANDBY2 =

  (ADDRESS = (PROTOCOL = TCP) (HOST = host02-vip)(PORT = 1521))

  Tnsnames.ora files contain the same information on both nodes, just to make my life simpler.

  It's just how I do it. You can certainly use the alternative method too.

  See you soon,.
  Brian

• Logging of 1031 errors received on the eve

  Logging of 1031 errors received on the eve

  ORA-01031: insufficient privileges

  PING [ARC0]: Unable to connect to the standby heartbeat "CPO". Error 1031

  
  

  
  

  
  

  Please help me
  

  Hello

  For the transfer to proceed efficiently, the password standby file must be a copy of the primary and renamed the previous day. We can use v$ view pwd_file_users of data dictionary to check if the password file is used

  1 copy the password of the primary of the eve and renamed file the password in the following format file, IE orapw .

  2 restart the process of recovery of the media on the day before.

  Once the above steps are performed, we could see that shipping again and redo apply runs.

  Copy the last file password from the MAIN node available to the rest of the PRIMARY teaching and STANDBY nodes:

  CD $ORACLE_HOME/dbs

  ls - lrt

  SCP orapw oracle@PROD_NODE_2_hostname: / home/oracle/dbs

  SCP orapw oracle@DR_NODE_1_hostname: / home/oracle/dbs

  SCP orapw oracle@DR_NODE_2_hostname: / home/oracle/dbs

  DR

  Select * from gv$ pwfile_users;

  We must check the standby and primary sec_case_sensitive_logon.

  SQL > show parameter sec_case_sensitive_logon;

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  SEC_CASE_SENSITIVE_LOGON boolean FALSE

  SQL >

  We must recreate the passwd file or copy the main backup server server.

  In case the value of the sec_case_sensitive_logon parameter is true, use orapwd command below.

  orapwd file = $ORACLE_HOME/dbs/orapwPROD password = password123 entered = 10 ignorecase = y

  At issue, the value of the sec_case_sensitive_logon parameter is false, use orapwd command below.

  orapwd file = $ORACLE_HOME/dbs/orapwPROD password = entries password123 = 10

  DR

  cancel the MRP process:

  ALTER database recover managed standby database cancel;

  from mrp process:

  modify the recovery of database managed standby database disconnect from the session;

  Select INST_ID select, process, status, thread #, sequence #, block #, blocks of gv$ managed_standby;

  check the synchronization of the DR and see the difference.

  Link referance:

  • http://troubleurheart.blogspot.in/2011/01/monitor-DataGuard-status.html
  • http://alazydbasblog.blogspot.in/2012/04/steps-to-resolve-error-1031-received.html
  • http://bitbach.WordPress.com/2010/08/27/pingarc1-heartbeat-failed-to-connect-to-standby-DGP-error-is-1031/
  • www.dbaglobe.com/2011/01/monitor-DataGuard-status.html
  • http://muthuappsdba.blogspot.in/2012/12/error-16191-pingarc2-heartbeat-failed.html

  Thank you

• [DataGuard] [Error 12514]  Logging of errors received on the eve

  Hi all

  As a first step, I would like to say I am a beginner in Oracle databases and I need help. I need to set up simple database of the day before. I followed this tutorial http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php for this. Problem is that primary db is unable to connect to the standby db. Services information below:

  Primary DB:

  CentOS 6.4

  Oracle 11 g 2

  ORACLE_SID = primdb1

  SQL > SELECT MESSAGE FROM V$ DATAGUARD_STATUS;

  Message

  --------------------------------------------------------------------------------

  Arc0: Started archiving

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  Arc1: become the "no SRL" ARCH

  ARC2: Become the heartbeat ARCH

  Arc1: Starting to check in thread 1 sequence 31 (336165-356856)

  Logging of 12514 errors received on the eve

  Heartbeat PING [ARC2]: Unable to connect to the day before "stbydb1". The error is 12514.

  Arc1: Completed check-in thread 1 sequence 31 (336165-356856)

  ARC3: Started archiving

  Message

  --------------------------------------------------------------------------------

  Logging of 12514 errors received on the eve

  FAL [server, ARC2]: error 12514 creation archivelog remote file "stbydb1".

  ARC3: Starting to check in thread 1 sequence 32 (356856-357024)

  ARC3: Completed check-in thread 1 sequence 32 (356856-357024)

  Arc0: Start to archive thread 1 sequence 33 (357024-357138)

  Arc0: Completed check-in thread 1 sequence 33 (357024-357138)

  17 selected lines.

  [oracle@oracled dbhome_1] $ bin/lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on July 31, 2013 11:00:13

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Early July 31, 2013 10:37:38

  Uptime 0 days 0 h 22 min 35 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  The listener log file /U01/app/Oracle/diag/tnslsnr/oracled/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=oracled) (PORT = 1521)))

  Summary of services...

  Service 'primdb1' has 1 instance (s).

  'Primdb1' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  [oracle@oracled dbhome_1] $ bin/tnsping stbydb1

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on July 31, 2013 11:00:55

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.33)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = stbydb1)))

  OK (0 msec)

  [oracle@oracled dbhome_1] $ cat network/admin/tnsnames.ora

  primdb1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.100.234)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = primdb1)

  )

  )

  stbydb1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.33)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = stbydb1)

  )

  )

  Standby DB:

  CentOS 6.4

  Oracle 11 g 2

  ORACLE_SID = primdb1

  SQL > SELECT MESSAGE FROM V$ DATAGUARD_STATUS;

  Message

  --------------------------------------------------------------------------------

  Arc0: Started archiving

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  ARC2: Become the heartbeat ARCH

  Logging of 1017 errors received on the eve

  FAL [client, ARC2]: error 16191 connection at primdb1 for the extraction of the gap sequence

  ARC3: Started archiving

  Try to start inside the managed standby recovery process

  MRP0: Background Managed Standby recovery started

  Managed Standby recovery not using real time applies

  Message

  --------------------------------------------------------------------------------

  Compensation online redo logfile 1 /u01/app/oracle/oradata/primdb1/redo01.log

  Online redo logfile 1 full compensation

  Media, waiting for thread 1 sequence 22 recovery

  14 selected lines.

  [oracle@rh1 dbhome_1] $ bin/lsnrctl status

  
  

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on July 31, 2013 07:05:55

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Early July 31, 2013 06:39:13

  Uptime 0 days 0 hours 26 min 42 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  The listener log file /U01/app/Oracle/diag/tnslsnr/RH1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rh1.localdomain) (PORT = 1521)))

  Summary of services...

  'Db' service has 1 instance (s).

  "Db", READY state instance, has 1 operation for this service...

  Service 'stbydb1' has 1 instance (s).

  'Primdb1' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  [oracle@rh1 dbhome_1] $ cat network/admin/tnsnames.ora

  DB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.33)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = db. WORLD)

  )

  )

  DB2 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.37)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = db. WORLD)

  )

  )

  primdb1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.31)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = primdb1)

  )

  )

  stbydb1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.132.28.33)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = stbydb1)

  )

  )

  Thanks in advance for the help.

  See you soon.

  What name should have the file password on the backup server?

  On the primary server and the standby ORACLE_SID = primdb1. The db_unique_name = stbydb1 for sleep and db_unique_name = primdb1 for primary education.

  orapwd file = $ORACLE_HOME/dbs/orapwd.ora password = entries =

  For this purpose for the primary, that he would be,

  orapwd file=$ORACLE_HOME/dbs/orapwprimdb1.ora password = entries = 10 (example)

  Once created, copy the file to the standby server in $ORACLE_HOME/dbs location of database ensures and rename the file in orapwstbydb1.ora

• Logging of 1017 errors received on the eve

  I'm trying to put in place a watch physics
  
  primary db_name = > car
  primary db_unique_name = > pri
  
  Eve db_name = > car
  db_unique_name standby = > sta
  
  
  LISTENER_car = (DESCRIPTION =
  (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp) (HOST = 172.168.1.2)
  `)))
  SID_LIST_LISTENER_car = (SID_LIST = (SID_DESC =(SID_NAME=car)
  (GLOBAL_DBNAME = car_DGMGRL)
  (ORACLE_HOME = usr/orasys/10.2.0.2r4))
  (SID_DESC = (SID_NAME = pri)
  (GLOBAL_DBNAME = car_DGMGRL)
  (ORACLE_HOME = usr/orasys/10.2.0.2r4))
  (SID_DESC = (SID_NAME = sta)
  (GLOBAL_DBNAME = car_DGMGRL)
  (ORACLE_HOME = usr/orasys/10.2.0.2r4))
  )
  
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  car chain db_name
  db_unique_name string MICS
  real chain of remote_archive_enable
  remote_dependencies_mode string TIMESTAMP
  remote_listener chain
  Remote_login_passwordfile string EXCLUSIVE
  REMOTE_OS_AUTHENT boolean FALSE
  remote_os_roles boolean FALSE
  
  
  db_unique_name = pri
  FAL_Client = "to_pri."
  FAL_Server = "to_sta."
  Log_archive_config = 'DG_CONFIG = (PRI, STA)'
  Log_archive_dest_1 =' location = / oradata/car/archive
  VALID_FOR = (ALL_LOGFILES, ALL_ROLES)
  = pri db_unique_name'
  Log_archive_dest_2 = "Service = to_sta lgwr async
  VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)
  db_unique_name = sta
  Log_archive_dest_state_1 = ENABLE
  Log_archive_dest_state_2 = ENABLE
  Noms_service = "pri."
  Standby_File_Management = 'AUTO '.
  
  
  
  
  
  SQL > conn sys@to_pri as sysdba
  Enter the password:
  ERROR:
  ORA-01031: insufficient privileges
  
  
  WARNING: You are more connected to ORACLE.
  SQL > conn system@to_pri
  Enter the password:
  Connected.
  SQL >
  
  ORA-01017: name of user and password invalid. connection refused
  Fri Mar 27 14:23:39 2009
  Logging of 1017 errors received on the eve
  ------------------------------------------------------------
  Verify that the primary and standby use a password file
  and remote_login_passwordfile shared or EXCLUSIVE.
  and the SYS password is the same password files.
  error ORA-16191
  ------------------------------------------------------------
  Fri Mar 27 14:23:39 2009
  Errors in the /home/oracle/car/admin/backdump/car_arc0_2220054.trc file:
  ORA-16191: customer main newspaper not connected waiting for shipment
  Heartbeat PING [ARC0]: Unable to connect to the night before "to_sta". The error is 16191.
  
  
  I created the file password with the same password I have for SYS
  and copied on before, but it didn't work
  
  any suggesstions/comments are highly appreciated
  
  Thanks in advance

  Create files of password on two databases (one on a primary school, waiting) - do not copy them. You have not mention version, but if it's 11g using ingorecase = y, while creating password files (even if the two passwords are the same)

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• Receive the error message "the instruction at"0 x 00424590"referenced memory at"0 x 00000004", the memory could not be"written"." Error is received before the Windows logon prompt

  Receive the error referenced memory before you receive the logon prompt Windows session during the boot process.  Have replaced the RAM on the computer.  Windows Xp SP3.

  If anyone can identify the update that they think that may be the cause of the problem, you can navigate to the uninstall folder and determine what files have been updated.  If they can not start (except in the Recovery Console), you can also sort updates the date by using the dir command in the folder c:\windows (all $NtUninstall records).

  Problem is who writes all updates with Patch Tuesday comes around (say... it's today!-be prepared for positions "broken Windows my computer updates" start coming!).

  For example:

  When you install an update, first installation makes a copy of the files he wants to replace in the $ $NtUninstallKBnnnnnn... folder.

  That's why you can uninstall the update later.  Running uninstall the update will sometimes remove the updated files, then copy the original return files.  Sometimes uninstalling copy just the original preupdate on top of the most recent files.  It can also remove some registry keys, so Windows Update do not think you have more (look at the spuninst.inf file).

  Look at this update of security for example (KB950762) that updates c:\windows\system32\drivers\rmcast.sys:

  If you have installed, it will create this folder:

  c:\windows\$NtUninstallKB950762$

  You will have the front update file c:\windows\system32\dllcache\rmcast.sys in this folder since the installation of the update makes a copy of the original file for you.

  Then look at the file spuninst.txt spuninst folder and you will see what will happen if you need to uninstall the update:

  DEL "c:\windows\$hf_mig$\kb950762\sp3qfe\rmcast.sys".
  COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\dllcache\rmcast.sys '.
  COPY 'C:\WINDOWS\$NtUninstallKB950762$\rmcast.sys' 'c:\windows\system32\drivers\rmcast.sys '.
  COPY 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.txt' 'C:\WINDOWS\$NtUninstallKB950762$\spuninst\spuninst.tag '.

  In this case, uninstalling just copy the original file on top of the files that have been applied in the update, the spunint.inf updates registry tips and that's all.

  Notice that it also replaces the file in the dllcache folder too - c:\windows\system32\drivers\rmcast.sys is one of the 3498 drop that PAM cares everything (it's number 2500 in the list).  In dllcache files are backup files.

  If you were to access your drivers folder and rename c:\windows\system32\drivers\rmcast.sys to rmcast.lem, almost before you can Flash the 'missing' file will be replaced with the copy in the dllcache folder and you will see this in the event log:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\drivers\rmcast.sys. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5598.

  It is WFP in action and this means that WFP is working!

• 6280 all-in-One printer - changing of USB to Ethernet - error - connection cannot find the printer

  I am trying to reinstall my C6280 all-in-One printer on the product - my original installation CD was for a USB connection, I will reinstall for an Ethernet connection for use on our wireless network. I have the HP manual - install the software of the product in Windows XP for a wired network connection (Ethernet) - but get the error message - unable to locate the printer.   I plugged in the ethernet cable to the ethernet port on the computer and the router (Airlink 101).  Any suggestions on what I might hurt?

  Hello

  You can use the following link to install the printer on a wired n/w.

  http://support.HP.com/us-en/document/c01708573

  Just to confirm... Make sure that you connect 'printer and router using the ethernet cable.

  To make sure that your printer is found during installation, after plugging the ethernet cable, make sure that your printer is get a valid IP address.

  Menu - Network settings - display settings - display wired summary.

• Error Msg received on the tab open: Exc in ev handl: error: Bad NPObject as private data!

  Very simple - the following error message appears when I open a new tab with a web page or empty:
  EXC in ev handl: error: Bad NPObject as private data!

  Please see the solution in http://kb.mozillazine.org/Problematic_extensions
  "McAfee Site Advisor.

  (Windows): for best results, you need to uninstall McAfee Site Advisor from Control Panel > add/edit programs (programs and features). Restart the system. Then http://www.siteadvisor.com/ reinstalling and reboot the system. Installation of other waste (crapware) suggested applications.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Error: CONNECTION loop in the user data

  CONNECT IN a loop in the user data:

  Table X (sample data were actually lines 35K)

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  07 vv353 7872 0919 FV982 78282

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  01 ab122 0001 1982 AU123 99393

  05 cg899 6728 32322 IKL020 65252

  07 w353 0919 8282 FV982 78282

  now I need to order these data comparing the values of the line to old_id new_id for each combination of code, person, case

  need output like below

  Table X

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  01 ab122 0001 1982 AU123 99393

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  05 cg899 6728 32322 IKL020 65252

  07 vv353 7872 0919 FV982 78282

  07 w353 0919 8282 FV982 78282

  to get to what I use:

  -Request-

  Select * from table_x

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY old_id new_id PRIOR =

  AND code = code PRIOR

  AND case EARLIER case =

  PER person = person PREREQUISITE

  -Request-

  works very well with the sample data, but the problem is when executed with actual table that has 35K record...

  Cause: The condition specified in a CONNECT BY clause caused a loop in the application, where the next record to be selected is a descendant of itself. When this happens, it may be no end to the query.

  Action: Check the CONNECT BY clause and remove the circular reference.

  Thank you

  AK

  Hello

  CONNECT_BY_ISCYCLE is a pseudo-column that you can use in a query of CONNECTION BY NOCYCLE.  It is separated from the CONNECT BY clause.

  Try this:

  Select code, "BREAKS", person

  , SYS_CONNECT_BY_PATH (old_id, "/") AS path

  from table_x

  where CONNECT_BY_ISCYCLE = 1

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY NOCYCLE Old_id = new_id PRIOR

  AND code = code PRIOR

  AND 'CASE' = 'BOX' PRIOR

  PER person = person PREREQUISITE

  ;

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• 80071AA7 error code received on the attempt automatically install the update of platform for windows vista KB971644

  Can someone help me with this problem, I tried the using the automatic answer to nothing does not. Downloads all the time and tries to install, but always comes back to original setttings.

  Check this box:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/672d93f9-7635-44DD-9ce1-041b67fc3cdb

• "Error 75 received since the package Index Server. Please contact the Support Center"

  
  

  SOLVED!

  http://www.O2K.org/

  This guy deserves a medal!

  Lenovo should be ashamed of their support center; not yet able to fix their own mistakes!

• How to connect and disconnect the smartglass using another account.

  Original smartglasses title: xbox

  How to disconnect and connect with another account xbox smartglasses in windows 8?

  Recently, I found that you can pass the player tags to an another Microsoft Account. That's what I'm doing right now. Try give it a go. You should be able to connect after that.

  http://support.Xbox.com/en-GB/billing-and-subscriptions/account-management/switch-Gamertag-to-different-Microsoft-account

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.