Error 0x8007054F

Similar Questions

• Error 0x8007054F codes & 0x66A

  Hi there, I tried to install 2 x unsuccessful security updates. They are 2393802 KN (error 0x8007054F code) and Ko 974417 (error 0x66A code). I tried Fix - it and the analysis of malware and security running, but still updates will not be installed. Anyone know how I could fix this?

  Hello PaulAskill,

  Thanks for your post.  Please see this thread for a possible resolution on this issue.

  See you soon

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• Error 0x8007054F code when you try to install update KB2633171

  I'm having the same problem with the KB2633171 update, it is downloaded on my computer, but it won't install. Still getting an error 0x8007054F code and he keeps trying to install the update in my computer about every 10 minutes, with the same error code. I tried closing all other programs down, cleaned up in the browser history files, ran the chkdsk and everything clean, also defragment the hard drive. Then ran my antivirus scans nothing appears. My computer is still having the same problem, also another thing I've noticed since this problem updated my computer is starts to run a bit slower during starts and attempts to access the internet. What should try do next?

  I've noticed since this problem updated my computer starts to run a bit slower during starts and trying to access the internet. What should try do next?

  Suggest that you first spread malware as the cause of the problem by following these steps:

  Download, install, update, and run analyses both of these tools free anti-malware:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 16:31 on Friday, December 23, 2011

• Error 0x8007054f while installing Windows 7 SP1

  When you install Windows 7 SP1, the installation fails with the error 0x8007054f. Can someone tell me how to solve this problem?

  Mary,

  This problem is sometimes associated with damaged files or registry keys, to solve the problem, you need to search for files that are damaged, perform a upgrade on the spot and then reinstall Windows 7 SP1. Here are the steps:

  Step 1: Run Chkdsk.exe

  Click Start , and then click computer

  Right-click on the system (usually C:\) drive, and then click Properties

  Click on the Tools tab, then click on check now under error checking

  Use the default settings, and then click Start

  Click on schedule the disk check

  Restart the computer and the drive will be checked to find errors

  Or

  Run Chkdsk in command prompt with administrative rights.

  CHKDSK x: /F /R  (this command will perform a complete analysis (including bad sectors) and an attempt to remedy)

  Step 2: Perform a upgrade on the spot:

  Click on the following link for more information about how to perform an in place upgrade

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Step 3: Install Windows 7 SP1

  Start Windows Update and install Service Pack 1

  You can also consult the following content is necessary:

  Starting steps to take before installing Windows 7 Service Pack 1 from the Microsoft Download Center

  Problems to install a service pack for Windows 7

• Impossible to update windos xp3 I get error 0x8007054f

  I can't update windows xp3

  0x8007054F - Error_Internal_Error

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Download/install with error 0x8007054F problems

  I can not download I Tunes or Kodak Easyshare - both software stop during the installation process.  I have error message tunes is 0x8007054F.  EasyShare error message is 1935x17x2103064800x. The Easyshare fails if I try to download from the internet or try using an installation CD.  Also tried to upgrade to Internet Explorer 8.0 and this download is stopped too.

  Checked VISTA updates and there is that two install update failed messages - if this could be the problem?

  KB948465 & KB944036

  If Mick information does not help, I suggest you try a SFC/scannow to see if you may have some corrupted system files that might be
  block the installation of the update of Windows.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 0x8007054F when you install ITunes update.

  Error code installing ITunes: "Microsoft.VC80.CRT, version ="8.050727.4053", type ="win32"publicKey Token = architectures, processes or of the"1fc8b3b9a1e8e3b"="x 86". See Help and Support for more information. HRESULT: 0X8007054F

  Hello longbow590,

  Thanks for posting on the Microsoft answers Forum.

  Download and install this VC ++ runtime here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  You can watch the post following who has the same problem.
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/f4dd5033-9bcb-4788-B100-5e98bd80f6bf

  And on the Apple Forums:
  http://discussions.Apple.com/message.jspa?MessageID=10526839

  If please reply back and let us know if one of these help to solve your problem as it may help others.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MSXML 4.0 SP2 install error: 0x8007054F

  I have trouble to install anything that requires MSXML 4.0 SP2.  This is the error I get.  The GUID varies from an install to install it, but the error codes are consistent.  Please help, I can't understand what the problem is.

  Error 1935. An error occurred during the installation of Assembly component {303994BA-6487-47AE-AF1D-7AF6088EEBDB}. HRESULT: 0X8007054F. Assembly interface: returned IAssemblyCacheItem, function: commit, assembly name: Microsoft.MSXML2, publicKeyToken is "6bd6b9abf345378f", version = "4.20.9818.0", type = "win32" processorArchitecture = "x 86"
  
  I am running Windows 7 64 bit.

  Here are the logs:
  http://pastebin.com/fcf049b7
  http://pastebin.com/f4166ae80

  Any help would be greatly appreciated.

  Hello Alex Khristov,.

  Thanks for posting on the Microsoft answers Forum.

  I'd say run a SFC scan to see if there is any corrupt system files.

  Click Start

  Click on all programs

  Click Accessories, and then right-click on the command prompt.

  Select the Security tab and choose "Run as Administrator"

  Click on command prompt

  Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  Article number: 954430 - MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008
  This KB should be the most recent file msxml4.0 SP2. Check your version of the file and the date stated in the above article.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error 0X8007054F installing update KB2676562

  I get this error code eveytime I try to install this update I run windows xp 32-bit

  Hi wandablair,

  You can follow the steps in this link:

  Cannot install updates due to ' open or in use "ntoskrnl.exe

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• KB2676562 update fails with error 0X8007054F code

  I am constantly told to install this update, it fails every time.

  Hello

  Follow these steps and check if they help.

  Step 1:

  Put your computer in a clean boot State, then install the update.

  Note: Restart your computer as usual by following the steps described in the article.

  Step 2:

  Follow the steps in this article and check if that helps.

  Cannot install updates.

• Windows KB2393802 update fails with error 0X8007054F code

  OS is Win XP SP3

  Looks like it was the first update of the usual pack that came out this week. It doesn't have the rest Pack updates succeeded.

  FWIT previous update was installed on 12/01/2011 KB890830.

  I rebooted, still failed. I tried to run the update directly from the windows update web page, same result. A Google search suggests that I'm not the only one to question.

  If you are absent the Shell for Windows (KB2483187) and updates to the kernel (KB2393802) and yet the previous kernel update (KB2436673) and the two latest updates of the kernel (KB981852 & KB2479628) driver installed. I assume that the previous update of Windows Shell (KB2286198) is installed.

  This suggests that you may have picked up an infection of W32/Alureon-varying rootkit since mid-December.

  1. Let's see what could detect & remove Kaspersky TDSSKiller:

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  2. If such an infection was detected and removed: open Internet Explore (only) tohttp://support.microsoft.com/kb/971058 & run DEFAULT inside difficulty modes and AGGRESSIVE; Restart & test. [1]

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB971033 fails with errors

  Hello!

  I have a new laptop Sony Vaio Z11 with one installed at the factory of 64-bit Windows 7 Professional. Recently, I tried to install Windows XP Mode on it. Is necessary to install Windows Validation, who has asked to install a file called WindowsActivationUpdate.exe. I did, but the installation failed with the error 0x8007054f ("internal error") code. I tried several times, but she still didn't (once with another error code, 0x80070bc9).

  I get the message 3 in the event log:

  Initiating changes to the package KB971033. Current state is staged. State of the target is installed. Identifying client: WindowsUpdateAgent.

  KB971033 package could not be changed to the Installed State. Status: 0x8007054f.

  Windows Update "Update for Windows (KB971033)" could not be installed due to the error 2147943759 "an internal error has occurred." (Command line: "' C:\Windows\system32\WUSA.exe' 'C:\Users\MIKKON~1\AppData\Local\Temp\\{6a2d2a19-295b-4df3-bedd-6a3e968d7213}.msu' / quiet /norestart")

  When I go to http://www.microsoft.com/genuine/validate/ValidateNow.aspx and click on "Validate Windows", I get the following results:

  1. on Firefox, it asks to install WindowsActivationUpdate.exe.

  2. on IE8 it just says: "validation of Windows has successfully completed.

  What can I do to install Windows XP Mode?

  Problem solved!
   
  I went to install the http://www.microsoft.com/downloads/details.aspx?FamilyID=914fbc5b-1fba-4bae-a7c3-d2c47c6fcffc system update tool. He said 'Validation required' here, but this form of validation installed an ActiveX component that has worked. After that, I was able to successfully install WindowsActivationUpdate.exe! And after that, validation of Windows XP Mode worked very well too.
   
  Therefore, the ActiveX component validation or update the system tool that has helped. I think it was the ActiveX component for the following reasons:
   
  -C:\Windows\Logs\CBS\CBS.log contains errors that led me to believe there is a problem with what is called Microsoft-Windows-security-WindowsActivationTechnologies-WebControls. This sounds like the ActiveX control.
   
  D ' other people have no problems with WindowsActivationUpdate.exe, so they played before ActiveX validation.
   
  To sum up, the solution is probably as easy as going to http://www.microsoft.com/downloads/details.aspx?FamilyID=914fbc5b-1fba-4bae-a7c3-d2c47c6fcffc , clicking on the button validate and leave IE to install the validation ActiveX control. You can then skip the installation of the system update readiness tool and continue with WindowsActivationUpdate.exe.

• I got this error code trying to download itunes please help me!

  "an error occurred during the installation of assembly ' microsoft.vc80.crt.type ="win32".version ="8.0.50727.6195".publickeytoken ="1fc8b3b9a1e18e3b".prossesorarchitech =" x 86 "". " See Help and support for more information. HRESULT:0x8007054f

  Already answered:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-0x8007054f-when-installing-iTunes-update/7bf80e62-8391-4bea-8e76-6c6fec915cde