11.5.2.602 MSI only deployment with SCCM

Similar Questions

• Adobe Creative Enterprise Cloud deployment with SCCM R2 2012 problems

  Hello

  I tried to deploy Adobe Creative Enterprise Cloud to 8.1 of Windows machines that are identical, using SCCM 2012 R2.

  The Adobe package seems well, because it seems to deploy successfully on some machines. SCCM R2 2012 has been configured correctly, that I can deploy other software use, and even once, he deploys Adobe CC successfully on some of the machines.

  I tried to compare the package is downloaded to the computer client/test machine, with the original on the distribution using Beyond Compare, and there is no difference.

  I contacted Adobe Enterprise Support and they asked me to send in the Event Viewer logs, the installer msi and other newspapers from Adobe, the machine failed deployment. However, after Adobe study them, they told me that they could not identify any problem... Strange, because I could have sworn I saw error 1603 pop up more than 20 times on different machines, which indicates that the "Set - up.dat' file had a problem with it."

  After all the tests on more than 20 machines identical (same hardware / software), using the different settings on SCCM 2012 R2 and client machines, I still happen to have a reliable solution for the deployment of Adobe CC.

  The fact that it deploys successfully on the same machine and it fails on another, or sometimes deploy on two machines and fail on another (simultaneously), is something I don't understand.

  Another thing is that, if I try the deployment of 10 to 15 times after she failed the first time, it could pass by...

  Adobe Enterprise Support asked me if they could remote into a machine that doesn't have the deployment to take a look at it and I have agreed to this option, but it seems that my problem was ignored because they never to return for me.

  Someone had this kind of problem or something similar before?

  I need to be able to deploy 100 machines remotely. Manual installation is not an option.

  Any help is appreciated.

  This forum is really more about individuals and the cloud, these are the only links that I...

  Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

• When trying to download or update msi programs and it's got to the part of the installation, I get the Error 1606 could not access network location % APPDATA%\. This only happens with programs of msi.

  This only happens with programs of msi.  I used the fixit for me solution and it does not solve my problem and I'm afraid to mess with the registry.  What can I do now?  I am running Vista Home Premium.  I don't know exactly what details you want.  Just ask and I'll try to provide answers.

  Sorry to take so long to get back to you - but I have tried different things to try to solve my problem.

  I was able to upgrade Silverlight without problem.  But failed to update Adobe Reader or Java.

  I ran the Microsoft fixit to resolve the Error 1606.  These are the 50356 fixit.   Microsoft help page says:

  "This problem can occur if there is an incorrect setting in one of the following registry subkeys:"

  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"

  It did not work.  I went to the support page that you recommended and ran the fixit there - and who did not.

  Then I noticed that this fixit 50356 mentions 'current user' - so I tried to change my standard account to an administrator account.  It basically gave me two administrator accounts.  (I already had a separate administrator account and was simply put the password so that it will prompt to update Java and Adobe.)   Then I tried to update Adobe Reader by using the new administrator (officially a standard account) and had no problem!  Then, of course, the problem has been to my administrator account.

  I'm guessing that the Microsoft fixit didn't work is because I was on the internet using my standard account, not my administrator account.  So, it 'fixed' my standard account, that does not need fixing.  I can't connect to the internet using my administrator account, unless it is necessary.

  It would be useful that the Microsoft help page has explained that the problem is probably in the administrator user account that is used to download and upgrade programs, that the fixit solution that they recommended would fix the problems only on that account, and I had to log on that account, connect to the internet and then running the fixit.  But it doesn't work.  It just says: If you get the Error 1606, run this fixit.

  I changed my new manager at standard and I'll connect to my normal administrator account and run the fixit from here.  If this is the problem with this account, I will be setting up a new administrator user account and delete it.

  Thank you very much for taking the time to try to help me.  People like me who do not know much about computers need people like you to help us!

• Deploy with fpga after change of chassis.

  Hello

  I'm running a project Veristand 2011 with an NI PXI-8109RT controller, a jury of NI PXI-7852R fpga and analog outputs 5 NI PXI-6733.

  For development, I used a chassis PXI-1000 b.

  Now, I have moved the system to a PXI-1045 chassis, and I can't deploy the project more.

  It gets stuck the "start of the deployment group 1", and after a while, I get a timeout error (-307672).

  The only way I deploy the project is to remove the FPGA of the nivssdf and remove the NI PXI-7852R of the chassis.

  Of course I need to map FPGA, then... why the project will not deploy with it?

  Thank you

  Matteo

  Hello Matteo,.

  The chassis of 1045 (and other PXI chassis with a large number of slots) have several segments of independent PCI bus along the bottom of basket.  By default, triggers are not shared between the segments.

  So, if you want to synchronize all your cards, one solution is to put all cards in the same bus segment.  If this is not possible, you will need to go to MAX and manually map PXI Trig 0 away from your card master sync everywhere for other bus segments.  For more information on how to do this, see the following document:

  Routing see PXI trigger in the bus chassis PXI crossover

  Kind regards

  Devin

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.

• We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  Why is your site, not be able to be consulted in current Firefox?

  Firefox 3.0 is now rather old and vulnerable.

  If you must use a version of Firefox 3.0.x for that one site then try the portable version of Firefox 3.0.12. English is near the bottom of the list.
  http://sourceforge.NET/projects/PortableApps/files/Mozilla Firefox 2% C Portable ed. / Mozilla Firefox Portable edition 3.0.12 %2C.

  ^ copy + paste the url above.

  Installs it portable Firefox is autonomous, that it does not touch your version of Firefox or normal profiles for her.

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• I can not access the first 2 inches below the toolbar of any web page. This only happens with firefox. What I can do.

  Let's say I go to the homepage of Yahoo!. The bar is located on the top. When I use my mouse to click inside to let know that I want to type something, nothing happens. It does not seem to register that there is a part on the accessible page. This only happens with firefox and only on the first 2 inches on the web page. It also happens on any web page. I have all my updates and I also uninstalled and reinstalled. Don't know what else to do. No one I know seems to have an idea what is happening. I had a break for about a month, and then she came back.

      Baffled
  

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• Deploy a Lenovo with SCCM and enable Bitlocker during deployment?

  Hello!

  Anyone got information about TPM activation and activate bitlocker during the deployment of the new Lenovo with SCCM?

  Something like that but for Leonovo

  http://www.nullSession.com/2010/12/02/enable-TPM-in-task-sequence-with-SCCM-and-CCTK/

  Thank you, Magnus

  You can automate the secure TPM activation process, please see my post in another thread:

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/activate-TPM-chipset-and-suppress-F10-at-reboo...

  Any questions, let me know

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  MSI 4.5 installation problems

  I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  I get this for about 10 different registry keys. If I hit ignore whenever Setup ends, but he told me that he have not installed properly and windows may not work.

  Any body have ideas of how to do to solve this problem?

  Thank you

  I did some further research and came across this http://support.microsoft.com/kb/949377 while it is not the same update I tried to install it, the problem seemed similar. I tried Microsoft fix it at the bottom of the page and I tried again to install MSI 4.5. This time, it worked.

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• SimplePass only works with IE and not other browsers

  SimplePass v5.20.205a should work with other browsers like Chrome or Firefox?

  On my dv7-4295us w / Win7 - 64 bit, SimplePass only works with IE8/9. Use IE, suddenly me in connects to the listed sites. With Chrome or Firefox, suddenly won't open the password manager. After scrolling to and by selecting the entry with the correct connection info, an instance of IE opens and connects me.

  If Firefox is set as the default browser, one touch opens the password manager. You select the Web site, a warning message (Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program.)

  If Chrome is the browser default, one touch opens the password manager. The selection of the correct entry, results in a new instance of Chrome to open to my home page.

  BTW - the link for help does not (never) bar of tasks or SimplePass inside.

  Cognizer,

  Welcome to the Forum!

  Firefox will work with your version of SimplePass, called Digital Persona.

  The limitation is that you must use a PREVIOUS Firefox version: ~ 3.6 28

  Download of Firefox 3.6.x

  If you're ready to do this (use the old version), then you can use all the sites to your connections and also use the HP connection to access your account on your computer when it starts.  This old version of Firefox also works very well with IE8/9.

  You can update Firefox to the bosom of the version 3.6.x, when they ask... just don't get excited and upgrade to the latest Firefox or Simplepass balk.  Tip: You can keep a copy of your download 3.6.x autour just in case you lose the installation or something else happens and you need to reinstall Firefox later.

  IE8 is quite Rocky.  If you have no choice, be it, immediately update IE9.

  I don't know about Chrome.  Couldn't get anything to work with it.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  I hope this helps!

  We work hard to help!

  Whenever you see a useful Post - click on the Star Bravo on the left as a thank you!

  Doesn't have this Post solved your problem?  Mark "accept as Solution!

  Note: You can find the box "Accept as Solution" on threads started by you.

  2012 the year of the Dragon!

  Dragon tips:

  SimplePass flavoers Digital Persona and HP SimplePass 2011 / 2012 are MATERIAL dependent.  This means that your computer hardware dictates what kind of software SimplePass, you should run on your computer.  If you run Digital Persona SimplePass style, you must continue to run such - at least for now.  The software code is different, and are the two types are not interchangeable.

• SmartWatch SW2 not working only not with the LG Swift L9?

  OK, I've had something similar with previous Smartwatch (MN2), but I had hopes to go with SW2.

  LG Swift L9 is 4.1 (JBean). SW2 is *. B.0.25 (ALREADY updated with the latest, via a soft PC/cable and Sony Update Service).

  So here's how it is:
  -J' managed to pair with me LG9.

  -demand for Smart Connect (on the idle screen) so I install it from the game.

  -by opening Smart Connect on the phone, asking questions about SW2 app, once again - I install it from the game.

  -then what happens, is that I get the white rectangle on a gray background on the screen of smartwatch and SHE.

  -the only thing to recover/restart of the process is to reset the watch, try to pair again, that works, but immediately after, if I'm only smartconnect - I get the white rectangle on a gray background.

  Any ideas? Suggestions?

  My Sony - its advertised to work with 4 + smartphones Android, LG Swift L9 is such a smartphone. If it turns out to be a blocker - I'm going to Pebble (assuming that if he only works with LG L9)- AND WILL NEVER LOOK BACK.

  I wanted to stick with Sony, because I am a dev, and Sony seems to provide more structured SDK/API for this product by comparing to other smartwatches (with relatively pleasant store Play integration). But * beep *, know all this im lose confidence... (and patience).

  PS Yes - I called Sony support UK already, but they seem clueless. It seems that these guys here never had the SW2 in their hands.

  OK, looks like I solved my problem, then post it here - if someone comes barely similar.

  I took my SW2 to a colleague with another motive than mine (I think it's Samsung Galaxy something SII, also with Android 4 +). Then we paired up, and then, surprisingly - SW2 downloaded a SW update, got the upgrade to this 1.0. * slash 1.0. * version and the work began with his phone. Then we odd he reset the SW2 and paired with my phone - and it worked!

  Was apparently the version of SW2, I had initially was veeeeery old, old enough that didn't connect my LG L9 and old enough that my LG L9 might not even be updated. Once we have passed this point - everyhing works fine (at least for the last 5-6 hours).

  Problem solved then.