Deploy with fpga after change of chassis.

Similar Questions

• Problem with calendar after changing themes

  Hello world!

  I encountered a strange problem... After I changed my theme it is imopssible for me to add a date years for a new contact, impossible to save him!

  Someone has an answer for me?

  Thanks in advance!

  And did anyone know why the asterics remains on my icon instead, I read all the messages in my new...

  Have you tried a battery pull? With the machine on, remove the battery for 10 seconds then put at the back of the unit and let it boot normally.

• Problem with vi after changing the size of the window

  Hello

  I am very frustrated to change the appearance of the window properties for vi. Now I see all my controls front panel and I don't know what I did wrong.

  Is it possible to find my original vi?

  Thank you

  Could you give some more details on precisely what it was that you did to change the appearance of the front panel of your VI and how your façade is now different?

  I assume that you have changed the property of 'Appearance of the window' settings back to what they were originally, right?

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Sansui HDTV with PC quick entry works after change of pixels.

  Description of the problem: I have a HD of Sasui TV with an entry for PC I have deen usind more than a year.

  After changing the pixel size of the screen, we loss of image. The monitor works fine with my laptop. The monitor works in cmos and throughout the boot up to the windows XP screen screen and then turns off with this desktop computer. Dell monitor Im borrowing works fine. I may be wrong but I think that the driver may be bad.

  What I can do.

  Thank you

  Michael Bauer

  Operating system: Windows XP

  refresh rate is 75 Hz. Changed to 60 Hz. and the seams to have to fix the problem. Will freeze?

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place images and text where

  LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place the images and the text I would like.  I tried moving them to the bottom, but does not work.  Is there a way to encapsulate the images so that they can be places as much as I want?

  Select your photo and text inside the subform flowed. Right-click and select wrap in subform do the positioned Subform subform. This will allow you to move objects in this subform positioned the way you like them.

• Carved frame. Camera Basler with FPGA

  Hello!

  I use a 340kc of acA2000 of Basler camera controlled by an FPGA PCIe-1473R.

  After a few adventures, I finally changed and changed the configuration of TAP with this post.

  http://digital.NI.com/public.nsf/allkb/EA1727D8D620B81F8625797B0072257C

  With just the change in the FPGA, the camera works and takes pictures successful, however the framework is divided into four images (all identical but light intensity).

  When I also change the host code, only an image appears in the frame, but certainly not a good image, as previously.

  Someone knows why maybe this problem happening?

  Thanks for your help.

  I think I knew what is happening. I believe that section of the knowledge base that you read is incorrect. We will solve the problem together and I'll correct the article if necessary.

  Let's talk for a little bit of what's going on. The two keys are 10 bits each, but they are stored in the 16-bit data type. The two pixels must collect the FPGA to the host with a DMA FIFO. For more convenience, the code uses a single DMA FIFO even if there are two taps. The article suggests that you must combine numbers 16 bits 2-in-1 32-bit number and then send it in the DMA FIFO. There are a few problems with this: first, the DMA FIFO has been configured for 16-bit, so half the data is being deleted. In addition, the code on the host computer is dividing the 16-bit data in 8-bit, which is not correct.

  I think it would be better to change the DMA FIFO to support 32-bit data. You can do this by opening the LabVIEW project and right click on the host 16 DMA, select Properties, and then change the type of data in U32. After that, you must program the code on the host computer to divide the number. You will get then two tables (one for each). I think it will reconstruct the image correctly if Interleave you just these two tables.

  I have attached a few images. Try it and tell me if this works. If so, I will update the documentation.

  Jeremy P.

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• Fan noise after changing graphics - Qosmio F10-101

  Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
  Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

  Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

  Post edited by: marlena

  Hello Marlena

  The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

  Good bye

• Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Hello

  I use my custom as my apple ID email address, but this year I decided to change my domain and ID.

  I've seen this before: https://support.apple.com/en-us/ht202667

  My question is:

  Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Concerning

  Change the primary e-mail address on an account should not lose any content of the accounts - after changing your id: what to do when you have changed your Apple ID email address or password - Apple support (or disconnection across before changing preference and return with the updated later version)

  But if you are referring specifically to be able to redownload apps etc, they (and albums of music, etc.) could be removed from the Bank by the holder of the rights at any time, so you should not rely on the possibility of any element of the store to download again.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Re: Satelite C850-B516: copy data drive HARD recovery after changing the partitions

  Hello

  Forum need help once again

  I split single partition came with my laptop to have data in a separate partition. I wasn't aware that it will affect. I have not created any backup CD. No, when I run HARD drive recovery media creator I get error "NO HDD Recovery Area.

  I can see a healthy partition of 10 GB on my drive and disk partitioning tools are evidence of the data in it.

  I copied to the Active primary partition of USB. But when I boot from USB, he leaves everything recover.

  It comes

  Can I recover my system to factory default using the recovery data copied?

  Concerning
  Ahmed

  Toshiba Satelite C850-B516

  # Problem, it is that your recovery image is useless now. When you want to use the external device for installation of recovery image is must be created as device start and it can be done if you use the preinstalled recovery media creator.

  Recovery image is saved on the HARD drive and fixed with the so-called markers. Recovery media creator can find these markers and start using the recovery saved on the HARD disk image. After changing structure of HARD disk partitions these markers disappeared and this is the reason why you see this error message.

  I'm afraid you must order now new recovery m FRO Toshiba drive and you can do it on - https://backupmedia.toshiba.eu/landing.aspx

• Tecra M10 - #1 IDE error after changing ODD

  Hello community

  I know that the M10 is old enough, but until last week, worked well.

  First of all, there is no STRANGE access: drive doesn't recognize any media. After changing the STRANGE, I got the error IDE #1. After a little research I found that this must be a matter of ide toshiba cross wiring (?). Found something on the overcoming of the pins, but it did not work. Because I wanted to reinstall Windows XP (but the ODD is broken) I put the HARD drive in another laptop, removing all partitions on this subject, a reinstall a XP clear on that.
  Back on the M10, the laptop does not start but remains in a black screen with a blinking cursor.

  Anyone have any useful suggestions on these issues?

  Greetings and see you soon,
  Herz.aus.Gold

  Hello

  In my opinion the IDE error appears due bad master/slave setting of the new CD/DVD drive.

  The fact is that not all drives are compatible with all laptops. So the best option would communicate with a service provider allowed for a new compatible drive. An alternative, you can also buy the same car from an another computer store