11g installation of the Agent on AIX fails
We install 11g Agent and it fails with the following error: error in invoking target 'agent nmb nmo emsubagent SMN.We need to set one of the environment variables? Please help.
Paul
Hello
This is a known issue on AIX 6.1, follow the document below:
1298284.1 Note : INSTALLATION of the AGENT ON AIX 6.1:ERROR IN CITING FOCUS 'AGENT NMB NMO SMN EMSUBAGENT'
Best regards
Vincent
Tags: Oracle
Similar Questions
-
installation of the agent on the vmware ESX Server
Hi, im trying to install the agent 2.7.6 on an esx server of vmware 3.01, somehow, the agent does not connect to the administration server, I opened the ports on the firewall of esx with esxcfg-firewall - openport port 7443 and 2144 but I still can not the agent to connect to the management server... everything I forget?
RgdsHi Nicky,
We will clear up the confusion of port for the next version. Regarding
availability be yellow, I believe that it is through the combination
the VMware API in 3.0 is much slower than ESX 2 times 20
VMS exposes this recently fixed issue: http://jira.hyperic.com/browse/
HHQ-437You can find a patch fixed the issue that should solve your
lights of availability. Let us know if that helps. It is also possible
to reduce the memory usage by disabling the plugins that vmware
Buy adding to agent.properties:plugins.include = VMware
You can also change the max heap size in agent.properties:
agent.javaOpts =-Xmx128mOn 15 January 2007, at 03:52, Haan Nicky wrote:
> okay... It's already better... but first, autodetect didn t
> work for hyperic settings, when you try to set it to 0 for the port.
> He complains the port must be between 1 and 65535.
> change the settings on the execution of the agent already has failed
> either, so I killed the admin machine and deleted data
> folder on the computer of the agent, after the reset and the
> the right credentials and port 443 (Please note that the)
> authd.client.port is 902... and not 443, check/etc/vmware/config
> for this authd.client.port = '902', so I obviously thought that of
(> What is necessary in the settings, maybe just state port 443 here?) I have
> then started the inventory, which is quite long (10 minutes) and
> memory and CPU was quite up on the esx Server (this is a double quad
(> xeon machine with 16 concerts and about 20 vitrual machines running)...
> the agent runs now, but somehow I think that the moment a large number,
> availability is always on the yellow... I think that the agent
> must refine even more here... on an esx 3.0 server there are only
> 1 cpu and limited memory available for the linux Machinehote...
> maybe it's not enough for the agent?
> -
I have attemptred to convert a Server Windows 2000 Server SP4 on a server of VMware ESXi 4.1.
I started the process of a PC Windows XP running VMware converter-all-4.3.0 - 292238 and I got the error "could not complete the installation of the agent vCenter Converter on server %. Error 1 603 "code.
Read in the forums, it seems that the correct version of VMware Converter Standalone is up to 4.1: is this correct?
To solve the problem, I installed VMware converter standalone 3.x on Windows 2000 box, but I don't think it's the best choice.
Can someone please help understandiong what is the proper way to convert a Windows 2000 Server?
Concerning
Marius
Faced with the same problem.
Solution: manually install the agent of vmware converter on the machine that you want to convert. Choose install Cusotm and only install the agent (client or server)
See you soon
Swap
-
Installation of the Agent of EE ODI existing infrastructure of OBIEE
Hello
We have installed OBIEE and works very well. We want to install ODI EE Agent on the same machine, so that we can use an existing installation of the WebLogic Server.
(1) it is advisable to install OBIEE & ODI on the same machine and use only an instance of weblogic?
(2) If Yes, then we have completed the installation successfully, but I see no any ODI server or node or any relation to the ODI in EM or console.
(3) should I do extra configuration to get ODI Agent appear in EM & Console? If Yes, could someone point me in the right direction please.
(4) also how to check ODI EE officer works very well.
Thanks in advance.Not if you have weblogic SE:
Oracle says:
Licensed restricted use of WebLogic Suite SE (restricted to run the components of OBIEE) is included and installed with OBI 11 g. SE of WebLogic is sufficient to run Oracle BI EE 11 g, but if the grouping is desired, then a WebLogic Enterprise Edition license. -
Error during installation of the agent on the monitored host Manager
Hi all
All in SOLARCOSY a manager of the agent in the host control, we are faced with this problem. Please could someone help me on this ASAP.
Please find the attached screenshot.
Kind regards
Shiva G
Please check this article, he talks about a similar error start agents, the solution may be the same
https://support.quest.com/SolutionDetail.aspx?ID=SOL116611&PR=Foglight
Title
Cannot start agents on Windows FglAM: no memory buffer space available JVM_BindDescription
Agents installed on an Agent Manager of windows may not start. The following errors appear in the journal of FglAM:
2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - cannot start
java.net.SocketException: no available buffer space (maximum number of connections reached?): JVM_Bind2013-11-22 14:16:17.270 ERROR [start Thread] com.quest.glue.core.Glue - an unexpected error has occurred which may cause undesired behavior. You can contact Quest Software customer support if you see this error again: could not stop the native Launcher
java.lang.NullPointerExceptionCause
The number of ephemeral TCP ports by default is 5000. Sometimes, this number can be less if the server has too many active client connections through which ephemeral TCP ports are all used to the top and in this case no more can be allocated to a new client connection request.
Resolution
Resolution
The solution is to open the registry editor and look for the registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and add a new entry, as shown below:
Value name: MaxUserPort
Value type: DWORD
Value data: 65534Workaround
Restart the Agent Manager Foglight
More information
-
Black screen after installation of the Agent from the view.
Hello
I am facing a weird problem on my windows 8.1.
I have install for use as a template for a pool automated view 5.1
When I install the vmtools, after that I installed the agent of sight, I got a black screen.
I tried several times and I got the same thing.
I'm not able to convert into a model of deployment of workstations after.
Can you please help me on this problem.
Thank you in advance.
I'm a little unclear - which command do you have installed? If you have installed VMware Tools after the Agent of the view, you need to uninstall and re-install the Agent of the view... It must ALWAYS be installed last, even if you're just updating tools.
In addition, Windows 8.1 is not supported with view 5.1 IIRC
-
Installation of the SDK however Webworks fails on Windows 8
I don't know why I tried this, but here's the screenshots of the error messages that I get during installation.
I don't know if it is a Java issue or something with SDK Webworks or is it even supported on Windows 8?
You can get this to install but it is not supported I think.
Make a right click on the installer - under compatibility change Windows 7 compatibility version.
Run the Setup program again and it will install successfully. The Toolbox itself seems to work under Windows 8, I think it is just a configuration problem.
-
Installation of the flash player error failed to register
So many questions about the error doesn't have a registry can at least give us an estimate when it will be solved?
You answered earlier that you have tried all the solutions proposed in this forum. Most of the time over the last year the only solution that we posted is to use the Installer MSI http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player _ 13_active_x.msi
-
12 c the Agent fails to download
Hello
Newly installed Solaris agent. Successfully installed and started with all the problems.
But you try to run the download command gives the following message:
Error downloading: full download EMD failed: popped uploadXMLFiles: SGD version not yet checked. If this problem persists check related errors files to trace for ping to WHO. (OMS_DOWN)
Any idea.
-PaulHi Paul,.
Please provide the following information to confirm more on this subject:
+ The repository as requested, please download the following SQL query output output:
Connect to the database as a user SYSMAN repository and run the following query and provide the output
SQL > SELECT epv.plugin_id, epv.version FROM epv, ecp em_current_deployed_plugin em_plugin_version WHERE epv.plugin_type NOT IN ('BUILT_IN_TARGET_TYPE', 'INSTALL_HOME') AND ecp.dest_type = '2' AND epv.plugin_version_id = ecp.plugin_version_id;+ WHO machine, get the result of the following command:
$OMS_HOME/bin/emcli list_plugins_on_server
+ Server Agent, go in $AGENT_HOME/bin and run
. / emctl listplugins agent
+ Confirm, was this installed using the Exadata kit?
+ Have had errors observed during the installation of the agent?
+ Provide the output of the command:
. / emctl pingOMS++ Error, seems that there could be a conflict with plug-ins, we can determine the same thing of the above.
Best regards
Vincent -
Questions the agent (minimum distance of installation orders)
I have a few questions about agents for ODI.
First of all, lets say that I have a couple of agents set up for a production environment. We're in a box of SQL Server and is on a box of Essbase (just as examples). If I run a batch of OS file using the agent on the box of Essbase, the operating system batch file is running on this box Essbase? In other words, I don't have to set up some kind of special software (such as PSEXEC) or a script from the window to make the batch file of the operating system running on the remote server, would I? I guess that if I use the agent on the box of Essbase, because he just listen to and then sends the compiled code, that code would be executed on the Essbase server.
If I had but a single agent on SQL Server and you want to run a command on an Essbase server OS file, would be that batch file need to be put in place to be executed remotely?
In the second place, which must at least be installed on a server to create an agent on this box? The software ODI must be installed (so that drivers, the odiparms.bat file etc will be available for the agent) and then the agent installed through the command line (set up as a service). I suppose that if this is the case, there would be no need to change anything in the modules of topology or security, just to make sure that the drivers folder is updated and the odiparms.bat file is updated. However, is there a minimum amount of software that can be installed (essentially, the minimum of crude to get the agent works correctly).
Hope I'm being clear in my questions.
Thanks for your help,
MattMatt
You seem to have got it. An agent is a process that runs on a server. If you run an OSCommand of this agent, it is called on that server. So if you for example want to run an excerpt from SQL Server using BCP, you will have performed by the agent in your SQL Server box. The output file "land" on the server where the command was executed.To install an agent, you must still libraries etc. It runs as a Java application on this platform and requires the same etc. jdbc driver libraries that you use on the development environment. Use the Setup program to install, and there is only one installation of the agent. (if you cannot run the Setup program on your platform, then just move the directory oracledi to your installation media and configure the ODI_JAVA_HOME variable, and you are away.
C -
Can forms 6i, 10g and 11g coexist in the same windows box?
Hi all.
Is there besides using different ORACLE_HOMEs, any consideration to take into account to install 11 g and to coexist with 6i and 10 g?
I just do a 11g installation, and in addition to having failed, he also do my 6i installation unusable.
Your comments will be greatly appreciated.
Best regards, Luis...!Yes, all three can co-exist on the same Windows box. I currently have Oracle Froms 6i and 10g R2 or 11g R2 installed on the same workstation. The builders of form work well, however if you plan to run a form from the forms Builder, you will have conflicts between the (Forms 10 g) OC4J and WebLogic (form 11 g) server. I was able to work around these conflicts by changing the system path and make sure that the inputs of 10g of forms appear before 11g entries when I need to run a form from the Forms Builder 10 g. Conversely, to ensure that 11g entries appear before 10g entries during execution of a form of the 11 g Forms Builder.
I saw a thread where someone said that they were able to work without having to modify the system path, but I was unable to find this thread again to test their solution. You can search this thread if you do not want to change the system path every time.
Forms 6i come into conflict because it uses the forms instead of an application server Runtime to run a form from the forms constructor.
I hope this helps.
Craig...Published by: Silvere on 7 February 2013 13:12
-
Not communicating is not the Agent of Load Test
Can't seem to be set in the controller
I opened the two firewall machines for all ports recommended on this forum
I can ping both directions
I can map a network drive in windows of the agent computer controller
I can telnet to the controllers / ports both agents
I have activated the firewall connection and you can see requests from the controller
The service on the agent runs under the named local administrator account
Both machines use the same login of local administrator account
I see no activity in two newspapers of the agent
When I try to set the system VIEW Agent (using IP) JMSAdmin with default password it says it cannot contact the agent system
Controller is v9.21.0030 of the complete installation, the agent runs the installation of the agent from v9.21.0030
about execution of ideas
Published by: 795499 on March 17, 2011 15:44Ian
I logged a bug a wile there is on this subject (10013810) if the ping is disabled, it fails the test, but it will always connect anyway so just ignore the error.
You're right for me the test should either be removed or we should check that we can access the system through its ports is not using ping.
Concerning
Alex
-
Opus system Windows XP Edition SP3 eddition family
I tried to install two NICs - Netgear RangeMax Wireless - N USB 2.0 adapt WN111v2 and PCI Ralink Startech 555WG 801,11 g Wireless PCI Adapter Card. In both applications on the end of the installation I received the message that installation failed.
I downloaded all the latest drivers, disabled antiwirus program and firewall, I called the software factory. Nothink helped. Everything is pointing to problem windows install the drivers.
For installation of Netgear USB wireless adapter WN111v2 - after installing software you plug wirelles adapter to the USB port and start the final driver configuration. After that I get message "installation of the client software has failed. Restart your computer and run Setup again.
Can you help me?
Hello
Step 1: Adding to the suggestion of A70M1C, you can also check if the problem persists in the clean boot state.
Reference: http://support.microsoft.com/kb/310353Step 2: Also check if you can find any error message in the event viewer and send back the same.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I have OEM GC 10.2.0.5.0 / g 11 DB running on a redhat Server 5. I normally install manually the OEM agent on other machines, but I would like to make agent OEM integration feature works for me, but I can't do it. When I go to the tab "Mutations", section Installation of the Agent, Agent to download the software and click on the "Download" button I get an error: "internal error occurred. Check the log file for details. "I was following in emoms.trc. I checked clearly as an internet connection. A couple of things, I wonder about where is agent downloaded from and make I need to specify credentials somewhere?
2010-07-22 14:02:25, 384 [EMUI_14_02_25_/console/target$ ctxType = hosts] WARN pref. SubtabPref getFolders.710 - unknown case id: VirtualServers comes from repository
2010-07-22 14:03:55, 380 [EMUI_14_03_55_/console/agtdnload/downloadAgentKit] ERROR ltfu. HandleRequest.640 PageHandler - java.lang.NullPointerException
java.lang.NullPointerException
at oracle.sysman.eml.ecm.agentpush.DownloadHelper.getSelectedIndex(DownloadHelper.java:361)
at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleDownload(DownloadAgentKitController.java:474)
at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleEvent(DownloadAgentKitController.java:181)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:777)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:328)
at oracle.sysman.eml.app.Console.doGet(Console.java:304)
at oracle.cabo.servlet.UIXServlet.doPost (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:265)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:369)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:670)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2010-07-22 14:05:41, 083 [EMUI_14_05_40_/console/agtdnload/downloadAgentKit] ERROR ltfu. HandleRequest.640 PageHandler - java.lang.NullPointerException
java.lang.NullPointerException
at oracle.sysman.eml.ecm.agentpush.DownloadHelper.getSelectedIndex(DownloadHelper.java:361)
at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleDownload(DownloadAgentKitController.java:474)
at oracle.sysman.eml.ecm.agentpush.DownloadAgentKitController.handleEvent(DownloadAgentKitController.java:181)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:777)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:328)
at oracle.sysman.eml.app.Console.doGet(Console.java:304)
at oracle.cabo.servlet.UIXServlet.doPost (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:265)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:369)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:670)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)If the preparation you need to do before being able to push the Agent from the console OEM GC in this post described:
http://oemgc.WordPress.com/2008/06/19/deployment-of-an-agent-preparation/
His accent is OEM GC 10.2.0.4 for 10.2.0.5, it will be the same
concerning
Robhttp://oemgc.WordPress.com
-
Where to install the agents?
Hello
I now architecture:
-Server 1 - ODI installed with the Server option
-Client 1 - installed ODI with the customer option
-Client 2 - installed ODI with the customer option
-Server 2 - DB Oracle installed - ODI repositories created
-3 Server - Oracle DB - source system
-Server 4 - MS SQL Server - source system
-5 - Oracle DB server - target system
I do not know where to install the agents for this architecture:
-on server 1?
or
-on 3 or 4 (source systems) servers
or
-the Server 5 (target system)
What solution will be the best in this case?
Thanks in advance!It is best to install the agent as close to the target as possible. So, in your case, it will be on Server 5.
In addition, since you don't have only one target, then you have the advantage that you can install only one officer and it works.
Just keep in mind, that during the installation of the agent on the Server 5
Server2 and server4 serveur3 must be visible to Server 5.To further explain the above statement,
We have Filesystems FS1, FS2, on which the source files are located.
And the agent is on ORADB1 that is the target Oracle DB. FS1 and FS2 file systems are visible to the system on which ORADB1 is installed and that is why the agent on ORADB1 can also see file systems and so access the files for processing.HTH
Maybe you are looking for
-
Block diagram of... block diagram
Hi, I need your help. IM the wrong person for this post, but I have to do, so I depend on your help. I need to explain how LabView (pasted below) program works, but I don't understand it myself I would like to ask if someone can create a simplified b
-
Microsoft Word is not responding
My Word Documents does not open. I have Windows 2000, and the document window appears empty & then shows the address bar (not responding). We tried to uninstall & reinstall with the same question, we tried to reconstruct in 2007, have a program of da
-
BlackBerry black passport with Led flashing screen cannot reset soft.
I was shooting video on the SD card when the screen went white after I stopped. The Red Led will blink once and then 3 times before to return to the model... no response of any kind... I tried a soft reset, but nothing don't get passes, have not tri
-
How can I change language (s) of German to English for my WIN7 OS?
My WIN7 Professional installed operating system runs in the German language, and I would that it runs in the English language.
-
How to get the message that API to a new version were supported once it is released?
Hi allFor my work, I do my Intigration of based on the API of the latest version. So I need to be reminded, when a new version is available.How could I get the message that a new version APIs were supported as soon as it is released?Thank youBiao