12 c and Certifications 5.6 MySQL database

Similar Questions

• continious streaming to the mysql database

  Hello

  I have LabvVIEW and LV Database Connectivity Toolkit. I'm creating a test sequence and I need to log the results and data to a mysql database. I want to ask you your opinion on what will be the most effective approach to connect to the database. I'll open connection once and then permanently in the stream of data to the database and then once I am finished, I've just will close the connection (similar to the concept of IO file in LabVIEW. Or will I open connection every time I need to connect to the database and immediately close and then open it again once I need to save the data again. SO basically, my program flow will be:

  1. opening (operator or engineer)---> this information must be connected.

  2. Select the test---> name sequence selected sequence must be connected

  3. start Test---> uut data number of series, and the result must be connected

  and so on.

  so the cycle just repeats, it may be that the operator will continue to another sequence of test, or switch to another object to measure. But all the information will be saved to the database.

  So, what will be the most effective approach of data communication? It is best to open the connection before, connect and then log the data on the fly, and then after the operator made with test, to stop the program, the connection will also be closed.

  or

  Whenever I need to connect to the database, I'll open the connection, and then close the log data (i.e. for the Login of the operator, the database connection will be opened, save the id of the operator, then closes the connection, then when a test sequence is selected, the database connection is open again and then save the name of the test sequence) and then close the connection, etc.)

  This will be my first to deal with the database and I don't know if the approach to database is the same as the approach to connect to the file using binary or text. I know that for the binary or text, it is recommended that we make data streaming, but for the database, it will follow the same concept? My concern is that these tests can last for hours. I'm not sure how stable it is to keep in now open database connection.

  Any help or opnion anywone, will be very happy. Thanks a lot in advcance!

  I think both architectures are good. Choose the best one depends on too many factors. How many connection you have simultaneously to this base? How is the load of your LAN network? How long can happen that you lost the connection with the database? The amount of data you want to transfer for each transaction?

  According to me, a third approach now is to connect the the test data for the local machine and transfer the data at the end of the trial. It is an approach to security that it is also proposed by Microsoft using the ADO SqlServer 8.Lorsque. The data group are indeed a copy of the data on the local, but I think that it is better to save data to a log file and once the acquisition is completed, transfer them to SQLServer and then kill the file.

• Created a site in dreamweaver, want to now set up the MySql database and username / password to access

  I created a site in dreamweaver, now you want to set up the MySql database and username / password to access a part of it. Dreamweaver's tools?

  I guess I need to learn PHP?

  Guidance gratefully received!

  Bob

  If you simply need to restrict access to your site, or a part of your site, there is an easier way to do it, using Apache htpasswd, but this solution is very limited and not suitable for use with clients, there is no interesting features people expect, as the ability to reset a lost password.

  Otherwise, Yes, you will need to learn some PHP and SQL.

  You will start by setting up your development computer with an Apache web server, which comes with PHP and possibly also MySQL. There are free versions, such as XAMPP, but I prefer Zend Server, which costs $195.

  Dreamweaver includes data 'tools' to the CS 5.5 version and there are third-party plugins available that will handle the data functions, but to really make things right you need to learn how to write your own code and don't mess with the tools who write code for you that you can not understand and are difficult to change.

  I think that David Powers PHP Solutions book is a good introduction and also includes a tutorial on building a password access system that is fine.

• DreamweaverMX and a MySQL database

  Hello
  
  I am trying to connect to my MySQL database in DreamwaeverMX.
  
  When I try to add the MySQL connection I put data as follows.
  
  Login name: connTrio
  Server name: localhost
  User name: root
  Password: password
  
  I get error message "the schooner error has occurred" when I try to select the database.
  
  I can confirm that the database is present, mysql is running, used password is correct.
  
  I hope someone can help
  
  Best regards
  
  Martin

  Hello
  The "nightmare" is over!
  Found this Wamp server set up

  http://www.wampserver.com/en/download.php

  100% working in less than 10 minutes!

• How to set up the MySQL database to connect from another computer?

  Hello

  I have a huge problem with that.

  What I want to do is:

  I want to create a system (in LabWindows/CVI) this will (among others) allow users to send simple messages to each other. So I want to create a MySQL database , which will be based on a server. Other computers running the system then is able to remotely connect to this database and read a certain table to see if they have new messages. I want that the client computer to connect through the LAN to the database on the server.

  But how can I do this?

  1. How to create a database that can be connected through the LAN?
  
  
  2. How my connection string should look like not on the client computer?
  
  
  3. What configurations on the client and server computers can I do?

  Any help is appreciated, and if you could suggest how can I do to reach my goal. I'm a very competent programmer, but HATE those network things.

  Thank you

  Umer

  Nothing really associated with LabWindows. Try http://dev.mysql.com/doc/refman/5.7/en/tutorial.html for the database installed and running on a server.

• How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  Unfortunately there is no direct connector for an application of WebWorks to a back-end database. You will need to do, is to have some middleware web server (Apache, Node.js, etc.) who manages a web service that you can make an HTTP request to and GET, POST, UPDATE, DELETE data. Middleware and then transmits commands to the back-end database and returns the results to the finished device.

• Link from Oracle to MySQL database select only one line

  Hello

  I created a connection to the batabase Oracle 11.2 to a MySQL database via a database link. The following statement shows that 35 lines are in the mySQL table:

  SQL > select count (*) from 'main_pages"@MOREWEB;

  COUNT (*)

  ----------

  35

  But a normal select statement only return 1 row.

  SQL > select 'subject' of 'main_pages"@MOREWEB;

  Object

  ------------------------------------------------

  Übersicht: references

  I use the mysql-connector-odbc driver - 3.51.30 - winx64. One is the newer version be installed because on Windows Server 2008 R2, I get an error with a missing dll file. The DataDirect ODBC driver is not possible, because we like to use the MySQL-database free one only support for DataDirect enterprise edition.

  I have also tried to limit the HS_OPEN_CURSORS or do not limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one line.

  HS Init.ora
  # This is an example of initialization file of the agent that contains the HS settings # necessary for the database to ODBC gateway # # HS init parameters # HS_FDS_CONNECT_INFO = moreweb HS_FDS_TRACE_LEVEL = WE HS_FDS_FETCH_ROWS = 1 # # Required for the non-Oracle system environment variables # #set < varenv > = < value >

  HS trace file

  Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Heterogeneous Agent release 11.2.0.1.0 Oracle Corporation - MITTWOCH 5 November 2014 13:56:22.066 Version 11.2.0.1.0 HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'ON '. HOSGIP to 'HS_OPEN_CURSORS' returned '50 '. HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '. HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536". HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. " HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '. HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '. HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '. HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '. HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '. HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '. HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG". HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '. HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '. HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '. HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '. HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '. HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.

  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.

  using mpgw as the default value to "HS_FDS_DEFAULT_OWNER".

  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.

  SQL text of hgopars, id = 1, len = 36...

  45 00: 53454 C 43542043 4F554E54 282 HAS 2920 [COUNT (*) SELECT]

  10: 46524F4D 20606D 61 696E5F70 61676573 [FROM ' main_pages]

  20: 60204131 [' A1]

  Delayed open until the first fetch.

  Deferred execution open.

  SQL text of hgopars, id = 1, len = 40...

  45 00: 53454 C 43542041 312E6073 75626 has 65 [SELECT A1.' subje(1)]

  10: 63746020 46524F4D 20606D 61 696E5F70 [ct' FROM ' main_p]

  20: 61676573 60204131 [ages A1]

  Delayed open until the first fetch.

  Deferred execution open.

  Please can someone help me.

  Thank you.

  Bianca

  Bianca,

  Everything I've read on this point to a need to install/reinstall the Microsoft Visual C++ Redistributable Package for windows OS 2008.

  You will need to download the appropriate version for your microsoft form system.  There is a lot of information on this topic.  Just

  search on the web, and it should help you in the right direction.

  Thank you!
  Matt

• Insert and update records to MySQL from Oracle

  Hello

  Our application will be insert/update new records in the Oracle database, but I need to insert/update new records in the MySQL database. Oracle and MySQL tables have the same columns.

  Right now, we intend to create DBLink between Oracle and MySQL. The question is to know how to write code to insert/update new records to MySQL from Oracle. I'm a new guy in this area.

  Please give us some examples of code, thanks!

  With Oracle, you should be able to just write the same thing as usual, except for the include link database when you reference the table for example your SQL

  insert into tablename@mysqldblink...

  updating of the game tablename@mysqldblink...

  Services gateway through the database link (odbc drivers or anything else that is used) must make the most of the necessary conversions for you.

• Can I manage a Mysql database with dreamweaver CC? Comment if so?

  Can I manage a Mysql database with dreamweaver CC? Comment if so?

  For example, I prepare a registration page and then I can't find how to connect MySQL database in dreamweaver CC pour it works.

  How does it do?

  1. download a new extension manager for CC.  Here is a list of 3, all free.

  Anastasiy extensions Manager

  http://install.anastasiy.com/

  The seven extensions of the project manager

  http://www.Projectseven.com/extensions/

  The DMX Zone extensions Manager

  http://www.DMXzone.com/go/22670/DMXzone-extension-manager-for-Dreamweaver

  ============================

  2. download the Extension of obsolete DMX Zone Server Behaviors panel

  http://www.DMXzone.com/go/21842/enable-server-behaviors-and-data-bindings-panel-support-fo r-dreamweaver-cc.

  ============================

  3. replace the obsolete server with a modern commercial extension behaviors:

  http://www.WebAssist.com/Dreamweaver-extensions/mysqli

  Nancy O.

• JDBC connectivity with a mysql database

  I created a MySQL database, but I have problems with communication with the DB in java

  Here is the error

  java.sql.SQLException: no suitable driver found for jdbc:mysql://localhost:3306 / books

  at java.sql.DriverManager.getConnection(DriverManager.java:604)

  at java.sql.DriverManager.getConnection(DriverManager.java:221)

  to displayauthors. DisplayAuthors.main (DisplayAuthors.java:30)

  java.lang.NullPointerException

  to displayauthors. DisplayAuthors.main (DisplayAuthors.java:66)

  BUILD successful (total time: 1 second)

  ---

  I edited windowds system variables

  CLASSPATH

  .; C:\Program Files (x86)\Java\jre7\lib\ext\QTJava.zip

  CLASSPATH1 (note the 1 at the end, I don't want to replace the previous

  ., C:\Program Files (x 86) \MySQL\Connector J 5.1.30\mysql-connector-java-5.1.30-bin.jar

  ---

  Host name: localhost Port: 3306

  User name: root

  password: Tpswsd77? (changed to thios post)

  Stored connection: Instance local MySQL56

  Connection method: Standard (TCP/IP)

  HERE IS THE CODE

  public class DisplayAuthors {}

  Database URL

  public static final String DATABASE_URL = "jdbc:mysql://localhost:3306 / books."

  Launch the application

  Public Shared Sub main (String args [])

  {

  Fitting out = null; corresponds to a connection

  Statement statement = null; query statement

  ResultSet resultSet = null; manages the results

  connect to the database books and database query

  Try

  {

  establish a connection to the database

  connection = DriverManager.getConnection)

  DATABASE_URL, "deitel', 'deitel'sc');

  < defaultstate editor-fold = "collapsed" desc = "comment" >

  DATABASE_URL, 'root', 'Tpswsd77?');

  < / Publisher-trick >

  CREATE statement to query the database

  Statement = connection.createStatement ();

  query database

  resultSet = statement.executeQuery)

  "SELECT authorID, firstName, lastName FROM authors");

  process query results

  ResultSetMetaData metaData = resultSet.getMetaData ();

  int numberOfColumns = metaData.getColumnCount ();

  System.out.println ("Table Authors of books database: \n");

  for (int i = 1; i < = numberOfColumns; i ++)

  System.out.printf ("%-8s\t", metaData.getColumnName (i));

  System.out.println ();

  While (resultSet.next ())

  {

  for (int i = 1; i < = numberOfColumns; i ++)

  System.out.printf ("%-8s\t", resultSet.getObject (i));

  System.out.println ();

  } / / end while

  } / / end try

  catch (SQLException sqlException)

  {

  sqlException.printStackTrace ();

  } / / end of capture

  Finally / / resultSet, statement and connection are closed to this

  {

  Try

  {

  resultSet.close ();

  Statement.Close ();

  Connection.Close;

  } / / end try

  catch (System.Exception Exception)

  {

  exception.printStackTrace ();

  } / / end of capture

  } / / end finally

  } / / main end

  } / / end of class DisplayAuthors

  Given that you seem to be running from netbeans, you would better add the jar to the project libraries...

  And NO, you should NEVER put anything in your system classpath. It's a very bad habit, led to the equivalent of Java of the DLL hell and of course from the moment that you distribute the application to any other machine that's going to fail again.

  Add it instead of the specific CLASSPATH of the application.

  And do not put anything on the class path that has spaces in the name, it is no longer can cause problems, but don't count on that it works.

• How to connect to the local mysql database

  Hello, I can't find the mysql database. I have set up the server in Dreamweaver CM³, but cannot view the database.

  Help, please. Don't know what info you need.

  Yes, I guess DMX is. I do not pay much attention to these things.

  If you use PHP 5.6, so be sure that your external server also uses 5.5 or 5.6. As a beginner, it is unlikely that you will use and features that differ between 5.5 and 5.6.

• How can I fix an 'Access denied' error when connecting to mySQL database to a site (I'm sure I can get...)

  Hello

  I had a search on the forums and I don't see anyone with the same problem so I apologize if this has been asked before.

  I need to connect a database to a Web site so that members can register and save it to some pages (not all pages - only a 'members only' section).

  I created the database, tested and it works very well (I used XAMMP/PHPmyAdmin).

  In DreamWeaver CS6, I chose the type of document from the page (PHP) and set up the testing server. If I go to site Configuration > server for the site and click on test, it connects successfully. Note that the test server is hosted at the University, that I work - there is a password required, but I entered it on the test set up server and it seems connects very well, as I get the message successfully at this stage.

  When I go to connect the mySQL connection and select the database I get the error "access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »

  Any ideas? It's driving me crazy!

  I understand that after several unsuccessful searches on Google, so I post the solution here for someone else with the same question that could end up here.

  If you configure your test server in the inetpub/wwwroot/folder then Dreamweaver cannot make changes (such as adding files) unless you are running as an administrator, so it occurred to me that maybe the database connections are also affected.  Of course, as soon as I leave Dreamweaver and restarted as an administrator, I was able to connect to the MySQL database using the databases Panel.  If you don't know how to run a program as an administrator, it is pretty easy: just right click on Dreamweaver icon and select "Run As Administrator" when you start the program.  There are a lot of tutorials out there that can give you the necessary steps for always loads a program as an administrator if you don't do right click every time.

  Version: Dreamweaver CC 2015.

• Problem, try to connect to oracle to mysql database

  Hello
  
  I need assistance with the configuration, I'm trying to connect to an oracle 11 g r2 windows to a linux mysql 5.5, but I'm having a lot of questions, here, I'll put the configuration.
  How thanks for everyone's trying to help me!
  
  Here is my tnsname.ora:
  tnsnames.ora # Network Configuration file: C:\app\Administrador\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = gabriel-103eff2)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  ms_connection =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = gabriel-103eff2)(PORT=1521))
  (CONNECT_DATA = (SID = ms))
  (HS = OK)
  )
  
  
  
  Here's my listener.ora:
  
  listener.ora # Network Configuration file: C:\app\Administrador\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\app\Administrador\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Administrador\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  (SID_DESC =
  (SID_NAME = ms)
  (ORACLE_HOME=C:\app\Administrador\product\11.2.0\dbhome_1)
  (PROGRAM = dg4odbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = gabriel-103eff2)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = C:\app\Administrador
  
  
  
  Here's the init*.ora:
  
  # This is an example of initialization file of the agent that contains the HS settings
  # necessary for the database to ODBC gateway
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = ms
  HS_FDS_TRACE_LEVEL = debug
  
  
  #
  # Required for the non-Oracle system environment variables
  #
  #set < varenv > = < value >
  
  
  
  Here is the fix:
  
  
  
  Oracle Corporation - SEXTA-FEIRA 17:18:13.390 January 4, 2013
  
  
  Heterogeneous Agent release
  11.2.0.1.0
  
  
  
  
  Oracle Corporation - SEXTA-FEIRA 17:18:13.390 January 4, 2013
  
  Version 11.2.0.1.0
  
  Hgogprd entries
  HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'debug '.
  Hgosdip entries
  default assignment of 50 HS_OPEN_CURSORS
  setting HS_FDS_RECOVERY_ACCOUNT or 'RECOVER '.
  HS_FDS_RECOVERY_PWD layout to the default
  default HS_FDS_TRANSACTION_LOG of HS_TRANSACTION_LOG layout
  HS_IDLE_TIMEOUT layout to the default 0 value
  layout by default HS_FDS_TRANSACTION_ISOLATION of "READ_COMMITTED".
  layout default HS_NLS_NCHAR to "UCS2".
  layout HS_FDS_TIMESTAMP_MAPPING default 'DATE '.
  layout HS_FDS_DATE_MAPPING default 'DATE '.
  layout HS_RPC_FETCH_REBLOCKING failure to 'ON '.
  HS_FDS_FETCH_ROWS layout without '100 '.
  parameter HS_FDS_RESULTSET_SUPPORT default 'FALSE '.
  parameter HS_FDS_RSET_RETURN_ROWCOUNT default 'FALSE '.
  parameter HS_FDS_PROC_IS_FUNC default 'FALSE '.
  parameter HS_FDS_CHARACTER_SEMANTICS default 'FALSE '.
  parameter HS_FDS_MAP_NCHAR if there is no 'TRUE '.
  setting HS_NLS_DATE_FORMAT or 'YYYY-MM-DD HH24:MI:SS ".
  parameter HS_FDS_REPORT_REAL_AS_DOUBLE default 'FALSE '.
  HS_LONG_PIECE_TRANSFER_SIZE layout without "65536".
  parameter HS_SQL_HANDLE_STMT_REUSE default 'FALSE '.
  parameter HS_FDS_QUERY_DRIVER if there is no 'TRUE '.
  parameter HS_FDS_SUPPORT_STATISTICS default 'FALSE '.
  The HS_FDS_QUOTE_IDENTIFIER parameter is not defined
  setting in HS_KEEP_REMOTE_COLUMN_SIZE if 'OFF '.
  parameter HS_FDS_GRAPHIC_TO_MBCS default 'FALSE '.
  parameter HS_FDS_MBCS_TO_GRAPHIC default 'FALSE '.
  Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
  HS_CALL_NAME_ISP layout "gtw$: SQLTables; GTW$: SQLColumns. GTW$: SQLPrimaryKeys. GTW$: SQLForeignKeys. GTW$: SQLProcedures. GTW$: SQLStatistics; "gtw$: SQLGetInfo.
  parameter HS_FDS_DELAYED_OPEN if there is no 'TRUE '.
  HS_FDS_WORKAROUNDS layout by default "0".
  Release of hgosdip, rc = 0
  ORACLE_SID is "ms."
  Product information:
  Port RLS / Upd:1 / 0 PrdStat:0
  Agent: Oracle Database Gateway for ODBC
  : Installation
  Class: ODBC, ClassVsn:11.2.0.1.0_0008, Instance: ms
  Release of hgogprd, rc = 0
  Hgoinit entries
  HOCXU_COMP_CSET = 1
  HOCXU_DRV_CSET = 178
  HOCXU_DRV_NCHAR = 1000
  HOCXU_DB_CSET = 873
  HOCXU_SEM_VER = 112000
  Entry hgolofn to 2013/01/04-17: 18:14
  Release of hgolofn, rc = 0 to 2013/01/04-17: 18:14
  HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.
  HOSGIP to 'HS_FDS_FETCH_ROWS' returned '100 '.
  HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".
  HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. "
  HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.
  HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.
  HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.
  HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.
  Invalid value of 32 for HS_FDS_SQLLEN_INTERPRETATION
  treat_SQLLEN_as_compiled = 1
  Release of hgoinit, rc = 0 to 2013/01/04-17: 18:14
  Entry hgolgon to 2013/01/04-17: 18:14
  Reco:0, tflag:0, name: SYSTEM
  Entry hgosuec to 2013/01/04-17: 18:14
  Release of hgosuec, rc = 0 to 2013/01/04-17: 18:14
  HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.
  HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".
  HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '.
  HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.
  HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.
  using the SYSTEM as default value to "HS_FDS_DEFAULT_OWNER".
  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.
  Entry hgocont to 2013/01/04-17: 18:14
  HS_FDS_CONNECT_INFO = "msodbc".
  RC =-1 of HOSGIP for 'HS_FDS_CONNECT_STRING '.
  Entry hgogenconstr to 2013/01/04-17: 18:14
  DSN:msodbc, name: SYSTEM
  OPTN:
  Entry hgocip to 2013/01/04-17: 18:14
  DSN:msodbc
  Release of hgocip, rc = 0 to 2013/01/04-17: 18:14
  Release of hgogenconstr, rc = 0 to 2013/01/04-17: 18:14
  Entry hgopoer to 2013/01/04-17: 18:14
  hgopoer, line 233: had native error 0 and sqlstate IM002; message follows...
  [Microsoft] [ODBC driver manager] Nome da dados nao e found melting nenhum driver padrão especificado {IM002}
  Release of hgopoer, rc = 0 to 2013/01/04-17: 18:14
  hgocont, line 2753: call SqlDriverConnect obtained sqlstate IM002
  Out of hgocont, rc = 28500 to 2013/01/04-17: 18:15 with the ptr error FILE: hgocont.c LINE: 2773 ID: something else that permission is not valid
  Out of hgolgon, rc = 28500 to 2013/01/04-17: 18:15 with the ptr error FILE: hgolgon.c LINE: 781 ID:Calling hgocont
  Entry hgoexit to 2013/01/04-17: 18:15
  Release of hgoexit, rc = 0
  
  ______________________________________________________
  
  When I use tnsping ms_connection
  
  
  C:\Documents and Settings\Administrador > tnsping ms_connection
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2
  013 09:04:29
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Archives of Parometros books:
  
  
  Used o useful TNSNAMES para resolver o apelido
  Contatar trying (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = gabriel-103eff2
  () (PORT = 1521)) (CONNECT_DATA = (SID = ms)) (HS = OK))
  OK (0 ms)
  
  
  
  
  
  Thank you very much!!!

  Hello
  The error in your gateway trace file-

  [Microsoft] [ODBC driver manager] Nome da dados nao e found melting nenhum driver padrão especificado {IM002}

  translates-

  Data Source name not found and no driver by default specified

  This means that you don't have a system DSN defined on the Windows machine called "ms", which uses a MySQL ODBC driver to connect to the MySQL database on your Linux machine.
  The system DSN to be used is defined by the parameter-

  HS_FDS_CONNECT_INFO = ms

  Therefore, you must perform the following operations

  -install a driver Windows ODBC de MySQL
  -define a DSN system whichuses this driver to connect to your MYSQL Linux
  -Use this DSN as parameter HS_FDS_CONNECT_INFO

  You must ensure that the DSN can connect to MYSQL without Oracle involved before DG4ODBC can also establish a connection.

  Kind regards
  Mike

• ORA-28500 and ORA-02063 connecting MySQL to Oracle.

  Dear all,
  
  My database is Oracle 11 GR 2 Rac 2 knots and on 64-bit Linux operating system.
  Version of my MySQL database is 5.5.17 it's the Linux 32-bit operating system.
  
  I am trying to connect to MySQL database to Oracle database using a database link.
  
  Here is the step by step process that I followed to reach my goal. All my processes are on an Oracle RAC node.
  
  1)
  Yum install mysql-connector-odbc
  Yum install unixODBC
  
  2)
  Edit the file /etc/odbc.ini
  [test]
  Driver = /usr/lib64/libmyodbc3.so
  Description = MySQL ODBC 3.51 Driver DSN
  SERVER = 10.0.0.1
  PORT = 3306
  USER = test
  Password = test
  Database = test
  OPTION = 3
  SOCKET =
  
  3)
  Edit the /etc/odbcinst.ini file
  [MySQL]
  Description = ODBC for MySQL
  Driver = /usr/lib64/libmyodbc3.so
  Setup = /usr/lib64/libodbcmyS.so
  FileUsage = 1
  
  (4) test connection
  isql - v test test test
  Returns:
  ---------------------------------------
  | Connected!
  | |
  | SQL query |
  | help [tablename] |
  | quit smoking |
  | |
  ---------------------------------------
  SQL >
  
  (5) now, I change the listener.ora file and add the entry. After the entry of my file listener.ora is like this:
  
  LISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = LISTENER))
  (ADDRESS = (PROTOCOL = TCP)(HOST=testnode1) (PORT = 1521))
  )
  )
  
  # line added by Agent
  LISTENER_SCAN1 =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = LISTENER_SCAN1))
  )
  )
  
  # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (PROGRAM = dg4odbc)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
  (SID_NAME = test)
  (ENVS = LD_LIBRARY_PATH = usr/local/lib:/u01/app/oracle/product/11.2.0/dbhome_1/lib)
  )
  )
  
  (6) after these entries, the listener after REBOOT status is as follows:
  
  LSNRCTL > status
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date December 27, 2011 01:19:32
  Uptime 0 days 9 h 31 min 12 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
  The listener log file /U01/app/grid/diag/tnslsnr/racnode1/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=testnode1) (PORT = 1521)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'test' has 1 instance (s).
  Instance of 'test', status UNKNOWN, has 1 operation for this service...
  Service 'testdb' is 1 instance (s).
  'Testdb1' instance, State LOAN, has 1 operation for this service...
  Service 'racdbXDB' has 1 instance (s).
  'Testdb1' instance, State LOAN, has 1 operation for this service...
  The command completed successfully
  
  (7) then in the tnsnames.ora file, I added the following entry:
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS =
  (PROTOCOL = IPC)
  (KEY = EXTPROC1521)
  )
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  
  test =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.0.0.1)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = test)
  )
  (HS = OK)
  )
  
  When I test tnsping, it works.
  
  (8) I change the file .bash_profile for Oracle
  ORACLE_HOME, ORACLE_BASE were already pointing to the right destination, I added:
  
  LD_LIBRARY_PATH=/usr/local/lib:/U01/app/Oracle/product/11.1.0/Db_1/lib:/U01/app/Oracle/product/11.2.0/dbhome_1/HS/lib:/usr/lib64:/usr/lib
  export LD_LIBRARY_PATH
  
  ODBCINI=/etc/ODBC.ini
  Export ODBCINI
  
  ODBCINSTINI=/etc/ODBC.ini
  export ODBCINSTINI
  
  ODBCSYSINI = / etc
  export ODBCSYSINI
  
  (9) then I configured $ORACLE_HOME/hs/admin/inithsodbc.ora
  And modified these lines:
  HS_FDS_CONNECT_INFO = test
  HS_FDS_TRACE_LEVEL = WE
  HS_FDS_TRACE_FILE_NAME = odbc_test.log
  HS_FDS_TRACE_LEVEL = 4
  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
  HS_FDS_SUPPORT_STATISCTICS = FALSE
  HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P1
  Set = /etc/odbc.ini ODBCINI
  
  (10) then I created a link of database with the following command:
  Create a database connection test audience to connect to test identified by test using 'test '.
  
  Also I tried the username and password in the database link with double quotes.
  
  (11) now finally when I try to select records from a mysql table:
  Select count (*) from "table"@"test" -I tried with and without double quotes
  
  I get the following error:
  
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  ORA-02063: preceding the TEST line
  
  How to pass through this error and how do I check the logs for HS?
  
  Your help is needed.
  
  Best regards, Imran
  
  Published by: misterimran on December 27, 2011 13:21

  Hello
  You had your listener.ora for the DG4ODBC entry-

  (ENVS = LD_LIBRARY_PATH = usr/local/lib:/u01/app/oracle/product/11.2.0/dbhome_1/lib)

  but it should also include the path to the driver manager directory which in your case is/usr/lib64 might then you add this?
  The error:

  Unable to load the ODBC library symbol: usr/lib64/libmyodbc3.so(SQLSetDescRec)

  indicates the lib64 directory are not accessible.

  The entry should look like-

  (SID_DESC =
  (PROGRAM = dg4odbc)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
  (SID_NAME = test)
  (ENVS = LD_LIBRARY_PATH = usr/local/lib:/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib)
  )

  Spaces may have bene lost at the time of publication, but at least there should be a space in the file as indicated by the .
  After the change is made and then stop and start the listener.
  If you still have problems, please post again the current versions of the configuration files, the complete errors figure in SQLPLUS to a select statement and the output of a trace debugging with errors.

  According to the information you use the 3.51 MySQL ODBC driver so could you also try with the latest version of the 5.1 driver and see if you have the same problem?

  Kind regards
  Mike

• fixing mysql database

  I have an old database that came from MS SQL and was imported long ago to mysql. He seems to have a few bad dates I need to fix...

  Some appear in the format:

  0000-00-00 00:00:00

  error in cf research says:

  cannot be represented as a java.sql.Timestamp

  (I think they speak of this area...)

  It makes it difficult to update the PB when it keeps the slightest mistake...

  also I tried to look with phpmyadmin in the field for: AS and 0000

  but empty shows query

  I've noticed that most recent TS seem to have additional one.0 in the end as:

  0000-00-00 00:00:00 = old problem?

  2012-10-01 00:00:00.0 = new ok...

  Q: How can I get around this?

  It is a well known problem in older versions of MySQL. A common solution is to include the property

  zeroDateTimeBehavior = convertToNull

  in the field of connection string in the source settings in the ColdFusion Administrator of MySQL database. Requests and then returns the value NULL in the 0000-00-00 00:00:00 as is encountered. See, for example, the Nadel's blog on this.