12 c CARS with Cloud control 12cR4

Similar Questions

• How to day/change the descriptor of connection to a database to target CARS in Cloud control

  I have Cloud control 12 c than Release 3 implemented and followed by many hosts and targets. However when monitoring my RAC (2 knots), it cannot connect to database instances (although it shows them only up to). I get the message "IO error: the network adapter could not establish the connection. I see that the connect descriptior using vip, rather than the host name.

  How can I update the connection descriptor in Cloud control to the correct values?

  Change the following configuration control listed below note

  How to change/update Configuration of the analysis of a target database or the listener in 12 c Cloud Control (Doc ID 1385769.1)

• Problem with installation of 12 c Cloud Control

  -Microsoft windows 64-bit 8.1
  -Oracle database 64-bit 12 c

  Hi, I need Cloud Control for my review "performance and Tuning. Is... i have a problem can not install it.
  Everything was perfect until the-> 'contact information database connection"where I need to write:

  1 host database name: ORCL

  2 port: 1521

  3 services/SID: orcl

  4 password SYS: < my password for sys > (it's all 100% good data to my database, I checked in EM Express)

  And when I click on the button 'NEXT', error window comes up with 'u host name entered can found should. "
  I used google and find this:

  • If you see an error message indicating that the connection to the database has failed with ORA-01017 user not valid name and password, and then follow these steps to resolve the issue: (1) check the SYS password supplied is valid. (2) make sure that the database initialization parameter REMOTE_LOGIN_PASSWORDFILE is set to Shared or Exclusive. () 3) check this file password with the file name orapw<SID> is in the <ORACLE_HOME>/dbs Directory of the House database. If it is not the case, create a password file using the ORAPWD command.

  I did all this but the problem just stay.

  9a8s7d6f5g4h3j2k1l wrote:

  SQL > select host_name of v$ instance

  2;

  HOST_NAME

  ----------------------------------------------------------------

  IZZY

  >. Host name of database: ORCL

  If the HOST name is "IZZY" why did you ORCL above?

  We cannot force you to enter the correct answers when prompted.

• How inegrate OID with OEM 12 c Cloud Control

  Hi all
  
  Is someone can you please tell me how I can integrate OID with OEM 12 c Cloud Control. As we integrate our OID with weblogic administration console, is it possible to integrate the control of cloud OEM with OID?
  
  Thanks in advance!

  Hello

  Please find the URL below:
  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/security.htm#BABGAGIJ

  Following article will provide you with information related to the integration of the OID:

  13.2.5 oracle Internet Directory (OID)

  You can implement an OID authentication scheme have Enterprise Manager to authenticate users against the OID.

  The emctl config auth oid on the WHO command creates an OracleInternetDirectoryAuthenticator type WebLogic authentication provider that uses the configuration specified by the command parameter values. All the configuration values specified not retain the default values. Tuning and modification of the OID advanced configuration settings is performed through the Console of Administration WebLogic Server and not the emctl config oid auth command.

  Prerequisites

  LDAP Directory Internet Oracle server is turned on.

  Run the oid emctl config auth on each SGD command.

  emctl config auth oid-ldap_host - - ldap_principal ldap_port [-ldap_credential ] [-sysman_pwd ] - user_base_dn - group_base_dn
  where:

  ldap_host: LDAP host name

  ldap_port: the LDAP port

  ldap_principal: the unique name (DN) of the user LDAP of the WebLogic Server should use to connect to the LDAP server.

  ldap_credential: password for the user specified by ldap_principal.

  user_base_dn: the basis of unique name (DN of the tree in the LDAP directory that contains the users).

  group_base_dn - the base distinguished name (DN of the tree in the LDAP directory that contains the groups).

  Example:

  emctl config auth oid-ldap_host "ldaphost" - ldap_port "3060-" ldap_principal "cn = sleep" - user_base_dn "cn = users, dc = us, dc = oracle, dc = com" - group_base_dn "cn = groups, dc = us, dc = oracle, dc = com" - ldap_credential "my_ldap_password" - sysman_pwd "my_sysman_password".
  Stop the SGD.

  emctl stop who-all

  Restart the SGD.

  emctl start SGD

  Note:
  For deployments of Enterprise Manager in several instances of the WHO, emctl config auth oid must be run on each SGD. Each MSO must be restarted so that the changes take effect.
  Test the Configuration of OIDS

  Use the WebLogic Server Console of Administration (tab users and groups) to check if the configuration of the OID is successful. To access this tab, select Home/summary of Security Realms/myrealm/users and groups. Tab users and groups, you will see the users and the groups showing the OID.

  Best regards
  Vincent

• Change the settings of catalog of recovery for all DBs in EM Cloud control 12 c

  Hello

  A project to migrate our RMAN recovery catalog (11.2.0.3 database) to the CAR, I need to update the Manager of the company with the new catalog of recovery settings. So far I couldn't find how to change it for each database individually, which will be your time to 40 + databases! I found this doc metalink [Doc ID 840051.1] on how to do it in the EM grid control, but don't find anything on how to do this for Cloud control 12 c.

  Does anyone know how to do this? Pointers would be much appreciated.

  Thank you

  Robin

  Hi Robin,

  This should also work for Cloud control 12 c.

  -Go to the homepage of the EM.

  -In the target tab click on databases.

  -In availability tab click 'Catalogues of recovery. "

  -Edit and modify data

  Concerning

  Stefan

• I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  Well, if you need older versions of firefox you can find them on this site:
  - http://www.oldapps.com/firefox.php

  Best regards, G-Cloud.

• Cloud Control 12 c

  Hi all

  I use Oracle Cloud control 12R5 and I need help with corrective measures.

  Q: I need to run a script that is located in the machine that hosts the control of cloud and not the objective that the incident occurred. Is it possible to do?

  Thanks in advance.

  You can not.  Your choice is, distribute the script for all servers and run via the single command in the corrective action.  Or, put the script in the corrective action so that everybody calls him together, instead of a single cmd call a script.

• Install the Cloud control 12 c high availability

  Nice day

  I install cloud control high availability, but when I install the third-party certificate services are not available when I check for HTTP.

  I followed the following guidelines:

  Deployment of a cloud of highly available 12 control Enterprise Manager:

  http://www.Oracle.com/technetwork/OEM/framework-infra/WP-em12c-building-HA-Level3-1631423.PDF

  And third-party certificate configuration, note:

  NOTE: 1399293.1 -EM 12 c Cloud control how to create a portfolio with certificate of third party trust that can be imported in the WHO of communication SSL?

  I have a few questions

  How can I change the CA in the OMS?

  How to export the certificate and key?

  Can someone help me, please

  Best regards

  Alexandra Granados

  Hello

  Please follow the steps below...

  EM11g / EM12c: utility ORAPKI to create a portfolio with third party to trust certificate and import into OMS [ID 1367988.1]

• Cloud control rule waiting/pause prior to the notification of incidents connection rule

  Can I set up a cloud Incident control waiting, maybe 10 seconds, before rule of triggereing a connection failure / inaccessible? We sometimes have errors of transient connection to monitored hosts, and I get inaccessible agent and other errors, which are erased a few seconds later. I therefore really Cloud Control to pause and try again before you trigger the rule.

  There is probably a way to run an external script, but if it is possible to do with CC, it would be preferable.

  Cloud Control 12.1.0.3.0

  Hi Duncan,.

  In MS 12 c, you create a rule to send a notification and/or to create an incident once opened an event for a specified period of incident. See this blog for an example.

  Related doc (see 3.4.8.7 with a time delay):

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/incident_mgmt.htm#EMADM12122

• How to create an incident rule to control of the 12 c Cloud Control alerts log errors

  I have a feeling it will be blinding in retrospect. I have 12 c Cloud control effective against a dozen guests and many DBs I have a rule defined for a database Instance that contains many points of interest - such as FRA filling. I chose each alert metric to see with the alerts log, including 'Generic Alert Log Error'. But I get error messages that appear in the alert log, as ORA-10173.

  Also, is there somewhere in the doco, or a data dictionary view, I can list all the parameters available?

  Thanks, helped these docs. It seems that Oracle has replaced generic monitoring with specific elements of monitoring, but it lacks some interested. However, the doc shows how this can be turned on again. Shame that it's hidden.

• OEM recommended 12 c Cloud Control Monitoring

  Hi all

  We are in the deployment process of models in OEM 12 c (version 4) for, among other things, CRM, BRM, DPOS, OSM, UIM, WCC, BEEP and FMW of surveillance.

  Is it perhaps all best practice documentation out there for what to monitor for each component? My apologies if my terminology is not quite to the height, I don't have much experience with OEM other than monitoring of databases with tools out-the-box, but I understand that there is no so-called management packs for most, if not all of the above, and that the installed agents will likely include things like CPU usage , memory and disk etc, but I am concerned about something else, that we might need to monitor.

  If there is some kind of guide to application of control specifically for each of these items, I think this should help me tremendously.

  Thanks in advance.

  There are certified/recommended models available for many objectives in the company-> monitor-> oversight models.  For example, Ebs, SOA, etc.   I suggest you look at those to begin with.  For DB, Cluster, RAC, etc. recommended are the default settings, so you can create a model of these default values by going to oversight as models above, select Create, and then select the option to create of target Type.  This will allow a drop-down list to select category (database) and then target type (for example database Instance).  Then all the metrics available db will be responsible, with departure recommended thresholds.  Of course, every company has different indicators or thresholds, so there is not 1 correct answer, but it's a good starting point.

  Key points to remember-

  -default incident rule provided by oracle takes no action on warning events

  -recommend create as on rule Inc. and create your own you can adjust/edit, and then clear out of box

  -If you get too many alerts/emails, adjust thresholds or remove thresholds to stop completely to the supervision of models

  -only to set thresholds for the items you will actually act on

  -use reports for others

  Few things I recommend to read:

  Strategies for Scalable, followed more intelligent by using Oracle Enterprise Manager Cloud control 12 c

  Zero to the ease of management - http://www.slideshare.net/CourtneyLlamas/zero-to-manageability-in-60-minutes-building-a-solid-foundation-for-enterprise-manager-12c

  Beyond the Basics: Making the Most of Oracle Enterprise Manager 12csurveillance - CON8138

• Installation Cloud Control agent 12 c on other blades thru RPM file and answer sets name of the bad cluster

  Hello

  I hope someone can help me with this. We have installed Cloud control 12 c em and its agents on various machines.

  First, we conducted with the target part two nodes of a network Infra cluster (let's call it proclu_1). Operating system is RH6.

  Then, using the same method (1 / y yum install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm then)

  2 / /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we have installed the agent on the other 2

  blades that are part of another cluster (proclu_2). The agent.properties file that precedes contained only the usual key-value lines:

  OMS_HOST = omsmachine.stuff.be

  OMS_PORT = 4889

  AGENT_REGISTRATION_PASSWORD = ametemp

  AGENT_USERNAME = oracle

  AGENT_GROUP = oinstall

  AGENT_PORT = 3873

  ORACLE_HOSTNAME = promachine.stuff.be

  Now, if I change to the/usr/lib/oracle/agent dir and search for the name "proclu *" from there, I found the name of the

  First install (on the first cluster of proclu_1):

  [oracle@bladb0406 officer] $ pwd

  / usr/lib/Oracle

  [oracle@bladb0406 oracle] $ find. -name "proclu_1."

  ./agent/agent_inst/SYSMAN/EMD/State/has/proclu2/cluster/proclu

  ./agent/agent_inst/SYSMAN/EMD/State/configstate/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/EMD/State/statemgmt/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/log/targets/cluster/proclu_1

  My questions:

  1 / the first two nodes (blada0204 & blada0406) in our first group this 'find' send him back

  same directory names with "proclu_1", this is what we expected: where to look for the agt oracle script

  our cluster name?

  2 / why he put the name of 'proclu_1' even - and evil - on our other two nodes (bladb0204 & bladb0406)?

  (us have expected 'proclu_2'...)

  Is there a way to fix this, or should I reinstall the agent (after you set/change something somewhere

  While it contains the name of the correct cluster...) ??

  Thank you very much.

  Kind regards

  SEB

  Unfortunately, this goes back to the RAC install procedures.   Check the name of the cluster for each cluster.   If they are all the same, installed, then you will need to manually discover/change name when you promote so that your clusters are unique in EM.

  To verify the name together for clusterware installation:

  / bin/cemutlo n

• Oracle Enterprise Manager (OEM) 12 c Cloud Control is broken after a reboot

  People,

  I use Oracle Enterprise Manager (OEM) 12 c Cloud Control version 12.1.0.3.  It was all work until we rebooted the box.

  Now, nothing is listening on the port 7801 more (by netstat), but if I put port 7302 instead in the browser's address bar, it'll take me actually to the OEM login page.  Once I'm connected, many things show that there are problems with communication between WHO and the agents.

  The shutdown process was not very successful and cleaning, shown below.  There was a lot of java still running process that I had to kill.

  [oracle@{BOX} ~]$$OMS_HOME/bin/emctl who all stop - force Oracle Enterprise Manager Cloud control 12 c Release 3 Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved. Stopping WebTier... WebTier could not be stopped Error occurred: WebTier could not be stopped Please see /usr/local/app/oracle/product/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for details of the error

  From, it looked quite well, but still we get these problems I mentioned above.

  [oracle@{BOX} GCDomain] $$ OMS_HOME/bin/emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  From Oracle Management Server...

  Departure WebTier...

  WebTier started successfully

  Oracle Management Server started successfully

  Management Server Oracle is in place

  This seems like a simple question, because we didn't change anything except adding memory to the box and restart.

  Is there anyone experiencing the same problem?  Is there any solution to this?

  Brian

  Brian,

  Can you access the console on https://oraaux1:7801 / em now?

  And, you are able to start the agent by running $AGENT_HOME/bin/emctl status agent?

  Regarding your initial post, is also the repository on the same host? If so, the problem could be due to the repository database was not entirely upwards when WHO launched on the reboot of the host system (gcstartup) startup script.

  When the SGC does not work as expected, you can take a look at SGD/monitoring of log files for clues. If necessary, please see:

  Location and configuration of the Enterprise Manager log files

  Kind regards

  -Loc

• Warum kann ich meine in der nicht with clouds desktop Apps

  Hallo,

  seit dem last updated cloud ist der are mir nicht mehr eine zu meinen Apps herzustellen connection possible

  Anzeige - Downloadfehler laden sie die App neu-gemacht determined 10 x, funzt aber nicht immer die anzeige too equal!

  Was kann ich noch tun?

  in other Foren habe ich auch versucht, ohne Erfolg und communications!

  Unitymedia Inetprov.

  Windows 10

  Danke schön evil as eingehende tips

  MFG

  Uwe

  Hello

  Please, try the following steps:

  Uninstall Adobe Creative Cloud Control Panel application.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe "common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder. [* important]

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Click on the link of shot and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, double-click the launch of Adobe Application Manager on the desktop icon.

  It will start the update process and is updated for creative cloud application.

  Kind regards

  Sheena

• How Oracle Enterprise Manager Cloud control 12 c homepage

  Hi all

  I have a PROD with OEM Cloud control 12 c environment and I do not know its homepage, but today I was wondering, what happens if I do not know the environment where I could get this info.

  So I tried to find out about Oracle docs and internet on my environment, but I wasn't able to find this info.

  You guys could help me?

  Thanks in advance.

  Hello

  The simplest is to run emctl status who-OMS_HOME/bin order details and look for the value of the URL for the Console

  example of

  $ emctl status who-details

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  Enter the password to Root of Enterprise Manager (SYSMAN):

  Console server host: myomshost.mydomain.com

  Console HTTP port: 7789

  Console HTTPS port: 7801

  Download HTTP port: 4890

  Download HTTPS port: 4901

  Instance of EM homepage: / u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1

  Location of the journal WHO directory: / u01/app/oracle/product/Middleware12cR2/gc_inst/em/EMGC_OMS1/sysman/log

  SGC is not configured with the PES or virtual host name

  Download of the agent is locked.

  SGD console is locked.

  CA active ID: 1

  The console URL: https://myomshost.mydomain.com:7801 / em

  Download URL: https://myomshost.mydomain.com:4901/empbs/upload

  WLS domain information

  Domain name: GCDomain

  The host server administrator: myomshost.mydomain.com

  Information managed server

  Managed Server Instance name: EMGC_OMS1

  Managed Server Instance host: myomshost.mydomain.com

  WebTier is in place

  Management Server Oracle is in place

  Another way is to check in the file /install/setupinfo.txt of and Enterprise Manager Cloud control URL

  Kind regards
  Rahul