Installation Cloud Control agent 12 c on other blades thru RPM file and answer sets name of the bad cluster
Hello
I hope someone can help me with this. We have installed Cloud control 12 c em and its agents on various machines.
First, we conducted with the target part two nodes of a network Infra cluster (let's call it proclu_1). Operating system is RH6.
Then, using the same method (1 / y yum install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm then)
2 / /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we have installed the agent on the other 2
blades that are part of another cluster (proclu_2). The agent.properties file that precedes contained only the usual key-value lines:
OMS_HOST = omsmachine.stuff.be
OMS_PORT = 4889
AGENT_REGISTRATION_PASSWORD = ametemp
AGENT_USERNAME = oracle
AGENT_GROUP = oinstall
AGENT_PORT = 3873
ORACLE_HOSTNAME = promachine.stuff.be
Now, if I change to the/usr/lib/oracle/agent dir and search for the name "proclu *" from there, I found the name of the
First install (on the first cluster of proclu_1):
[oracle@bladb0406 officer] $ pwd
/ usr/lib/Oracle
[oracle@bladb0406 oracle] $ find. -name "proclu_1."
./agent/agent_inst/SYSMAN/EMD/State/has/proclu2/cluster/proclu
./agent/agent_inst/SYSMAN/EMD/State/configstate/cluster/proclu_1
./agent/agent_inst/SYSMAN/EMD/State/statemgmt/cluster/proclu_1
./agent/agent_inst/SYSMAN/log/targets/cluster/proclu_1
My questions:
1 / the first two nodes (blada0204 & blada0406) in our first group this 'find' send him back
same directory names with "proclu_1", this is what we expected: where to look for the agt oracle script
our cluster name?
2 / why he put the name of 'proclu_1' even - and evil - on our other two nodes (bladb0204 & bladb0406)?
(us have expected 'proclu_2'...)
Is there a way to fix this, or should I reinstall the agent (after you set/change something somewhere
While it contains the name of the correct cluster...) ??
Thank you very much.
Kind regards
SEB
Unfortunately, this goes back to the RAC install procedures. Check the name of the cluster for each cluster. If they are all the same, installed, then you will need to manually discover/change name when you promote so that your clusters are unique in EM.
To verify the name together for clusterware installation:
Tags: Database
Similar Questions
-
How can I fix this error? Thank you.
SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.Hi DMarie125,
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en/category/SQLServer/
Hope the helps of information.
-
This is a double post of a following:
-
Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.
Hello
Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.
Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.
Thank you
-
A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?
I can't even read the sticker because it has been moved to a separate column on the right.
Hi Bobca,
I'm sorry, but the forecast of nail has been deprecated in the latest version due to security problems.
Kind regards
Nicos
-
Hello everyone I use Oracle Database EE 11.2.0.4 with DG.
In these cases, I need to get Enterprise Manager Database Control running against DB with no CARS and no DG I do the following:
I have SQLPLUS logon as user SYS or SYSTEM and drop the account sysman and business objects:
DECLARE
CURSOR c1 IS
SELECT master, synonym_name name
OF dba_synonyms
WHERE table_owner = "SYSMAN";
BEGIN
TO r1 c1 LOOP
IF r1.owner = "PUBLIC" THEN
RUN IMMEDIATELY "DROP PUBLIC SYNONYM ' |" R1. Name;
ON THE OTHER
RUN IMMEDIATELY "DROP SYNONYM ' |" R1. Owner: '. ' || R1. Name;
END IF;
END LOOP;
END;
/
Mgmt_view DROP USER CASCADE;
/
DROP ROLE mgmt_user;
/
Sysman DROP USER CASCADE;
/
After that, I run
EMCA - config dbcontrol db-rest recreate
But what do I do in case I have 2 servers (primary and standby) work according to the rules of the DG?
Hello
It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard. This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.
If you attempt to run emca against a database of pending, you will get an error like (i.e. ORA-01219: database is not open).
Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features). In such a case, failover Database Control needs to be reconfigured to run on the new primary database using the commands described in detail in Note 278100.1 how to remove, create and recreate DB Control In A Database, section c. recreate/ReConfig DB control, Option 2 10 g. recreate the control DB Configuration files and repository.
Enterprise Manager Grid Control or Cloud control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.
Reference: It is Possible to configure the database for a logical or physical Standby Database command? (Doc ID 315116.1)
You can effectively use EM 12 c cloud control to monitor and manager ensures DB
Ref to the link for more details below
Set up and manage to Oracle Data Guard with Oracle Enterprise Manager Cloud control 12 c
Kind regards
Rahul
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Start button > Search box, type msconfig > press the enter key > uac permission prompt > to the highStartup tab > scroll down until you find thedesk agent Board >uncheck the box > apply/OK
t-4-2
-
I think that the presets should be installed in the C:\Users\Frann-Serenity\AppData\Roaming\Adobe\Lightroom and perhaps even deeper in the folder to develop. I'm not sure because I'm a newbie at this. I have no idea how my Lightroom file put in my C:\Users\Frann-Serenity\Pictures. I have to install Presets but cannot get to work because they land in my pictures folder. Any help would be appreciated. Thank you
Hi FrancieLou,
The presets are stored in images when you have an option enabled in Lightroom preferences.
So, if you do not want them to be stored in the pictures folder, you must follow the steps below:
1. go in the Lightroom preferences > Presets tab
2 uncheck "save stations with this catalog" and click Ok.
Then, the presets would be stored in default C:\Users\UserName\Appdata\Roaming\Adobe\Lightroom\.
Kind regards
Claes
-
Try a different browser.
-
clean install of ultimate detail in a separate partition, already installed
Due to persistent problems with cleaning of virus alureon back remains including taskscheduler, backup and restore, System Restore, I propose to installed ultimate RAID 0 volume 0 (currently occupied by the details of the home premium) and copy files for ultimate in raid 1 1 volume (probably take 3-4 weeks). Please see my profile and posts for info on how I managed to get into this mess. As the systems are stable at the time can someone think of something to prevent this or better idea, if ok will install, mse, av and spy, ad, malware progs 1 before so I can scan all files on the file transfer. At present I have swop systems via the bios hard drive boot priority and order, takes seconds.hope this senseImage copy defective everything first as a precaution. Use Windows Easy Transfer to capture your files and settings. Den of the bad copy or reinstall Ultimate. Transfer your files and settings back with WET. You can scan the file .mig (the WET file) with the reinstalled the new copy of ultimate AV program before starting the transfer.
You cannot transfer your programs. They must be reinstalled. I don't see how using a second partition/installation ultimate solves anything. It would be a waste of disk space and a lot more work.
-
Can someone get this note "1390717.1: Cloud Control Agent 12 c: is it possible to re - configure an Agent to a different SGD 12 c without re-installation of 12 c?
I search in Metalink and I noticed that it in "how to make a 10g / 11 g grid Agent to another grid SGD and repository control without re-installing? [413228.1 ID] "but it's the only doc a search returns.
I have a test environment with agents pointed out an old SGO 12 c. I would use the same agents, but point our new production of OEM 12 c environment. Did anyone had success with this? I followed the 10g / 11g OEM steps without success, to date (early test).
I was happy to see "emctl switchOMS REPOSITORY_URL" in options emctl until I've read the next line...
This command is not supported.
Heck :-)
Kind regards
RichHello
The steps you need to follow are documented here: -.
http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCEBest regards, Marc.
-
Hello
I'm testing this feature, I found these days in our new 12.1.0.2 deployment of oracle cloud control. When I navigate to Enterprise-> Configuration-> Client system Analyzer. I click on the link Https://servername:port / em/public/ecm/AAFC/AAC of the link example. It shows that a collection of configuration was collected successfully and the data sent to the server. Before continue explaining just to elaborate on we had which was originally confined file exceeded that I fixed it using the oracle support article 843903.1. I then try to navigate Enterprise-> Configuration-> customer configurations. It shows that nothing has been collected. Is that what I'm doing wrong is there steps I need to do other than the Start button on the page 'Client system Analyzer' earlier that documents are not really clear about this.
Thanks in advance for your help.
Kind regardsFernemont
It seems that it was a bug. If someone is also having the same problem that you will need to download the Patch issue: 17743138
Kind regards
Fernemont
-
Add other fields to sql * source file loader without including them in the control file
Hello
We have a file that we receive every day to an external resource. We load the file into Oracle using Sql tables * Loader!
My question is, if external resources added more fields at the end of the file and I USED to change the control file to load (almost there will be right there without any use!)
Will I get an error SQL * loader?
or else, it will be fine!
Thank you
/HESI
In general, SQL * Loader will simply ignore the extra fields at the end of the line. However, there are exceptions to all rules. To do a correct delimiter after the last field you load. The additional fields must dressed not in the next line, unless you have authorized to do this. If the end of the characters of the line of the source operating system do not match at the end of the characters in the line of the target operating system, then you need to deal with this in one of the various ways. These are a few examples.
-
Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8. I followed several suggestions on this forum, but still no luck. I ran the SFC system twice, who told me he had corrupted files. "Some have been repaired and some might not be." I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found. Also the "hpqddsvc' and the 'gupdate' is not found. He tries to install something every time I start, but he abandoned. I checked whether the system is on and disabled. It's on. There are a lot of small problems, but my main concern is the Adobe program. I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?
Hello
I suggest you follow the link and check.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
-
Can a batch file I browse a folder and resize photos it finds the installation?
I work with a team of people that come out and take pictures of properties and download to our computer system.
Due to size constraints, we are unable to store everything to its full size.
I would like to install a bat file and deploy an icon on the desktop to give thanks to their record of entry and resize the photos to a standard size.
Is this possible?
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience of developers on MSDN. Please post your question in the Visual c# General forum. You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads
In case you use the other program, and then post the question on the link below.
Maybe you are looking for
-
VLOOKUP gives incorrect/unexpected results
HI guys I used to think I had this spreadsheet thing down pat, but I find myself place after midnight with a VLOOKUP problem struggle! I really hope that you can show me the error of my ways... I'm a convert from Excel so I can be taken in a mind con
-
Hi HP! I have a problem. I want to change my operating system from Windows XP to Windows 7. But I can't find the drivers on the HP home page. I would like to than all the drivers on my laptop (Lan, chipset, video, sound, exactly all, etc.) you can se
-
Anonymous UUID: F45E7E7A-F706-F758-0833-77E3C7A3A3DF 9 dec 15:34:09 sea 2015 Panic report *. panic (the appellant 2 cpu 0xffffff7f8d713bad): "panic GPU: 7f [] 5 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0x
-
Remove all tags from the Windows Photo Gallery
I deleted all the pictures in Windows Photo Gallery, but I can't find out how to remove all the tags at the same time. I really want to remove several hundred tags one at a time. This thread does not remove the tags of your files. http://social.answe
-
LaserJet M1217nfw MFP: want to receive faxes to your computer
I recently put my LaserJet M1217nfw on our network. I want to be able to view faxes on my computer before printing. Can I configure my computer to receive faxes on my computer if my computer and Laser M1217nfw are on the same network? I'm following