12 c change of target host name / IP without relocation agent

Similar Questions

• ESXi 4 - changing IP and host name

  Are there any known issues or needed additional steps beyond to enter the ESXi configuration console to change the host name and the IP of the server ESXi 4 existing (4.0 U2) and import in vCenter if physically move one envirment to another server (i.e. a Server Blade environment vsphere 4 test to another box to Prod vSphere 4)?  Or are there additional steps necessary?

  Also, would there be problems within ESXi if just to swap hard drives, if the servers are of the same model (i.e. blades HP dl480 G6)

  It's a fairly simple process to change the name of host or IP address - http://kb.vmware.com/kb/1006710.  If the host is currently bound to vCenter you can remove everything first.  Then you'll just join the host of your vCenter production after your changes in the same way that you would join a new host.  You can check the file on ESXi hosts to make sure that the host name is updated correctly and see if all custom entries has been added.

  You can swap disks, but you may need to correct assignments NIC after and you will need to check things if you use remote storage.  ESXi also uses the MAC address of the vmnic0 for the MAC from the management port so you'll want to update that to avoid the possibility of duplicate MAC address should end up with the two hosts on the same subnet.

• VMA 5.0 host name "localhost".

  I have deployed VMA 5.0 and although it asks for hostname during the deployment, it shows again that localhost. What is the right way to change his name?

  Change the Permanent host name

  Edit/etc/hostname, enter:

       vi /etc/HOSTNAME
  

  Delete the old name and add a new:

  server2.nixcraft.com
  

  Save and close the file. Type the following command:

  hostname server2.nixcraft.com
  

  See you soon,.

  Denis

• How to dynamically retrieve the host name of the server APEX?

  Hello
  
  I have request Express installed 3.1.0.00.32 on 2 servers in a configuration of dataguard, which means I can failover from one server to the other.
  
  The problem I encounter is the URL. I wrote a beautiful PL/SQ/procedure to send mail, in the body of the mail it is a URL that points to a hard-coded host name (teleg1:7777)
  

  BEGIN
  ....
   l_url := 'http://teleg1:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;
  ....

  It can occur I the digital switchover to the other server which name would be teleg2, but then the url change because the host name is "teleg2:7777".
  
  It should be like this:
  

   l_url := 'http://teleg2:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;

  Is there a way to retrieve the host name of a global variable of APEX, something like G_HOSTNAME? Or from another source? As a result, the procedure is as follows:
  

   l_url := 'http://||G_HOSTNAME||:7777/pls/apex/f?p=109:29:::NO::P29_ID:'||C1.ID ;

  The varialbe G_HOSTNAME would contain etiher "teleg1" or "teleg2" according to the APEX server that executes the PL/SQL procedure at this time.
  
  I hope I am clear.
  
  Good day!
  
  Christian

  Use the functionowa_util.get_cgi_env . You'd be interested in CGI environment variables SERVER_NAME and SERVER_PORT.

• change the target name in the Configuration of the analysis

  I need to change the name of the target in "Configuration of the analysis.
  but this isn't one of the options that can be changed...
  
  Basically, the target database name is ORCL.
  but we have several servers that have the same sid (ORCL)...
  
  There are moments when all the shows of the MA is ORCL (for examle the target research and monitoring desktop widget)
  and I can't tell what server he is...

  Hello

  I ran into similar problems. We have two parallel deployments of our databases, where we db1, db2, db3 on site1 and site2. It is a RAC configuration. Here's how I solved it:

  1. move all the databases of the grid, that you may have discovered.
  2. ensure that all hosts have agents and enrolled in the grid.
  3. navigate to targets-->--> addition of database, data bases
  4. Enter the host name of the place where to find the database.
  5. when the agent detects it, at this time, you can name the database you want. I would recommend calling it something like db1_site1.
  6. set your dbsnmp passwords and check the connections are successful.
  7 confirm the addition of these objectives in grid control.
  8. repeat the previous steps for the other sites.

  It worked pretty well for us. Additionally, make sure that your grid control unit can communicate with your databases on port 1521, or the listening port, since it sends commands to the listener of the GC box to validate the actions that you take in the user interface.

• Breaking SMB permissions after the NAS host name change.

  Broken SMB permissions after the NAS host name change

  ReadyNAS 104 firmware 6.5.1

  Who can help me?

  I couldn't reach the NAS with Windows Explorer. Problem solved now.

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• To change the host name of the device WAE

  If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?

  Thank you!

  Joe

  Hey Joe,

  You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.

  Kind regards

  Kanwal

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• Change the name of the logfile refelect esxi host name

  Hello

  I'm changing the name of the log file to reflect the name of each host name in listed in a file text How would I have done that?

  Thank you

  CODE

  --------

  ##Load VimAutomation PSSnapin...
  If ((Get - PSSnapin - name VMware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null)
  {Add-PSsnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue}
  
  ##Set server Mode...
  SetPowerCLIConfiguration - Multiple DefaultVIServerMode - confirm: $false

  #Get # hosts.txt file ESXi host list...
  $varHost = get-Content "S:\Get-Logs\hosts.txt".

  The cluster name #Enter...
  $Cluster = Read-Host "enter the cluster name.

  
  ##Path to clear the logs...
  $FilePath = "S:\Get-Logs\Logs\" + $Cluster + "\".

  Cluster ##Create folder...
  If ((New-Item - path $FilePath ItemType - directory - ErrorAction SilentlyContinue) - eq $null)
  {- New - path $FilePath ItemType - directory - ErrorAction SilentlyContinue}

  
  Password ##Root
  #Convert to ensure the chain...
  $varGetPassword = Read-Host "enter the ESX Root Password" - AsSecureString
  $ESXRootPassword = [Runtime.InteropServices.Marshal]: PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($varGetPassword)))
  
  ESXi hosts ##Connect
  Write-Host "" connection to the ESXi host: ', $varHost ' "»
  SE connect-VIserver $varHost - user 'root' - password $ESXRootPassword - WarningAction SilentlyContinue
  
  ##Do something useful here...
  ##------------------------------------------------------------------------------
  {foreach ($ESX to $varHost)
  
  Get - Log - VMHost (Get-VMHost-name $ESX) - Bundle - DestinationPath $FilePath
  }
  ##------------------------------------------------------------------------------

  
  
  ##Disconnect Esxi host
  Write-Host "" disconnect from ESXi host: ', $varHost ' "»
  Disconnect-VIServer $varHost - confirm: $false
  
  The script ##End

  End CODE

  ---------------

  The cmdlet Get - Log do not create the destination folder if it does not exist, so you will need to test for this condition.

  AFAIK, you don't need to connect to each ESXi individually when you are connected to the vCenter.

  Since the discharge of generated log file name is rather cryptic, I rename the file normally and add a timestamp.

  You could do something like that

  $clusterName = "mycluster.

  $FilePath = 'S:\Get-Logs\Logs\$($clusterName) ".

  If (!) ((Test-Path-path $FilePath)))

  {

  Novelty - ItemType Directory - Path $FilePath

  }

  $varHost = get-Cluster-name $cluserName | Get-VMHost

  {foreach ($ESX to $varHost)

  $destPath = "$($FilePath)-$($ESX.). Name.Split('.') [0])"

  If (!) ((Test-Path-path $destPath)))

  {

  Novelty - ItemType Directory - Path $destPath

  }

  $logName = get - Log - VMHost $ESX - Bundle - DestinationPath $destPath

  If ($LogName)

  {

  Rename-Item - Path $logName - NewName "$($destPath)-$($ESX.). Name.Split('.') [0])-$((Get-Date).) ToString('yyyy-MM-dd-hh-mm')).

  }

  }

• Can I change the host name and the IP of the ESXi servers?

  For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.

  I can change it directly? or view desktop computers will be affected by the change?

  This thread will help you

  Re: Hosts view change ESXi and Vcenter Ip addresses

  If you found my answer helpful, review the allocation of points by choosing answers useful/correct

• Changing the host name of a Machine running ESXi4.1U2...

  Re: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 861

  in ESXi4.1U2 (note: ESXi ESX not)-I want to change the host name - refers only to ESX - and not all steps are relevant.

  After I'm on the way to do it for ESXi4.1U2-

  THX in advance,

  r

  First line (vim - cmd hostsvc/net/dns_info) would get only the host name, while the second line would be the main task of chaning the host name.

  Once you run the second line, just select another item in the client vSphere (such as data store) and then check back the "and DNS routing, so it'll be Refresh display data (for me, it automatically displays the changes).

  If you still get the same result and the host name has not changed, could check if you can change it via DCUI?

• need to change host on existing short host name

  Hi all

  I installed all the packages of core of short (Mdex6.2.1, Platform6.1.1, Workbench2.1) and a pipeline on one of GNU / linux. Now, there is a need to change host name. Hope that it breaks any existing platform and the pipeline. Is there any linked document?

  What I think about short perspective are,

  Change hostname on environment.properties
  URL change on pipeline file esp

  Change the host name of the central server of ABC on Workbench

  URL change the app Setup overview on Workbench

  Is this what I need to consider?

  all comments are more than welcome.

  Thank you

  Take a look at KB support: how to change IP addresses or host names for hosts short (Doc ID 1532056.1).

• How to change the host name

  I have a lot of VSphere 4.1, ESXi 4.1 that I need to change the host name. Then I go in VSphere, highlight the host, set mode now, goto, DNS and routing configuration, the new host name change and restart, get fashion maint and host on the console of the host name ESXi said the NEW host name in DNS and routing it says the NEW name of host, but on the left hosts & Clusters discovered I still see the OLD host name... I try to add the new host name and it is said that there are already.  Is there something I missed >? >

  John

  the name to remember in the DB vcenter. one of the ways is to remove and add the vCenter.