need to change host on existing short host name

Similar Questions

• Reg: Query Get IP address and host name

  Hi all!!!
  
  Please help me, I need query for host name and the ip address... Please. its urgent
  
  
  
  Concerning
  
  Malek

  Hello

  In fact, my need is a record of front end during a deletion of the user. I want delete a record and what record

  Without activated imperatives, it is not possible to track data.

  Note: 60828.1 - Overview of Oracle Applications AuditTrails
  https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=60828.1

  Note: 105624.1 - Troubleshooting (Audit Trail)
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=105624.1

  E Business suit health/Audit?
  E Business suit health/Audit?

  Kind regards
  Hussein

• Host name of metadata

  Hi all.
  
  I need to extract information from repository OWB mapping. I managed to extract everything I need, except a little piece (of enough critical) data: the host name. I thought it would be stored in the places view or discovers modules but it isn't either.
  
  If you look in the project-> database-> Oracle--> name of the comic and then right-click-> open the editor, you get the module editor. Under the metadata tab location is base of data such as username, host, port, service and schema. What I need is the host name.
  
  I found the database link information in the view of information systems, but this proved to not be the info I needed.
  
  Any ideas where it can be stored? It's going to be there somewhere. I'm going blind through these points of view. ;-)
  
  Thanks in advance.
  
  LewisC

  Try the cmpstringpropertyvalue_v view. For example, to list all the properties for a location

  SELECT val.logicalname, val.value
  Of
  cmpstringpropertyvalue_v val,
  loc cmplocation_v
  WHERE val.propertyowner = loc.elementid
  AND loc.name = '';

  Nigel.

• I need to change my details of window mail host

  I typed in an invalid address for my Windows mail e-mail program & I need to change what I can send emails directly on Web sites. Where to find the info on the host & server my pc uses? I have no modem & just use wifi places.

  You need an ISP (Internet Service Provider) to configure Windows Mail to send emails to craigslist, etc.

  Or if you want to use Yahoo and Windows Mail, you must PAY version of Yahoo Mail PLUS for POP3.

  http://www.vista4beginners.com/Windows-Mail-Yahoo-mail-plus

  Set up Windows Mail to connect to Yahoo Mail Plus

  You can use Yahoo or Hotmail for web based email on the hotspots.

  Here is general information about how you would normally define Windows Mail, if you have an ISP (Internet Service Provider): http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  And you can open Windows Mail > tools > account > your account > properties > change for servers

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  Please follow it mentioned below as follows:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 reset the hosts - IP addresses redirected file may prevent you to complete the authorization process.

  • Run the host file fix in the cleaning CC tool.
  • Reset the file hosts manually.

  4 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  5 - raise the cloud creative app and connect

  Let us know if that helps.

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• Change the name of the logfile refelect esxi host name

  Hello

  I'm changing the name of the log file to reflect the name of each host name in listed in a file text How would I have done that?

  Thank you

  CODE

  --------

  ##Load VimAutomation PSSnapin...
  If ((Get - PSSnapin - name VMware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null)
  {Add-PSsnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue}
  
  ##Set server Mode...
  SetPowerCLIConfiguration - Multiple DefaultVIServerMode - confirm: $false

  #Get # hosts.txt file ESXi host list...
  $varHost = get-Content "S:\Get-Logs\hosts.txt".

  The cluster name #Enter...
  $Cluster = Read-Host "enter the cluster name.

  
  ##Path to clear the logs...
  $FilePath = "S:\Get-Logs\Logs\" + $Cluster + "\".

  Cluster ##Create folder...
  If ((New-Item - path $FilePath ItemType - directory - ErrorAction SilentlyContinue) - eq $null)
  {- New - path $FilePath ItemType - directory - ErrorAction SilentlyContinue}

  
  Password ##Root
  #Convert to ensure the chain...
  $varGetPassword = Read-Host "enter the ESX Root Password" - AsSecureString
  $ESXRootPassword = [Runtime.InteropServices.Marshal]: PtrToStringAuto([Runtime.InteropServices.Marshal]::SecureStringToBSTR($varGetPassword)))
  
  ESXi hosts ##Connect
  Write-Host "" connection to the ESXi host: ', $varHost ' "»
  SE connect-VIserver $varHost - user 'root' - password $ESXRootPassword - WarningAction SilentlyContinue
  
  ##Do something useful here...
  ##------------------------------------------------------------------------------
  {foreach ($ESX to $varHost)
  
  Get - Log - VMHost (Get-VMHost-name $ESX) - Bundle - DestinationPath $FilePath
  }
  ##------------------------------------------------------------------------------

  
  
  ##Disconnect Esxi host
  Write-Host "" disconnect from ESXi host: ', $varHost ' "»
  Disconnect-VIServer $varHost - confirm: $false
  
  The script ##End

  End CODE

  ---------------

  The cmdlet Get - Log do not create the destination folder if it does not exist, so you will need to test for this condition.

  AFAIK, you don't need to connect to each ESXi individually when you are connected to the vCenter.

  Since the discharge of generated log file name is rather cryptic, I rename the file normally and add a timestamp.

  You could do something like that

  $clusterName = "mycluster.

  $FilePath = 'S:\Get-Logs\Logs\$($clusterName) ".

  If (!) ((Test-Path-path $FilePath)))

  {

  Novelty - ItemType Directory - Path $FilePath

  }

  $varHost = get-Cluster-name $cluserName | Get-VMHost

  {foreach ($ESX to $varHost)

  $destPath = "$($FilePath)-$($ESX.). Name.Split('.') [0])"

  If (!) ((Test-Path-path $destPath)))

  {

  Novelty - ItemType Directory - Path $destPath

  }

  $logName = get - Log - VMHost $ESX - Bundle - DestinationPath $destPath

  If ($LogName)

  {

  Rename-Item - Path $logName - NewName "$($destPath)-$($ESX.). Name.Split('.') [0])-$((Get-Date).) ToString('yyyy-MM-dd-hh-mm')).

  }

  }

• ESXi 4 - changing IP and host name

  Are there any known issues or needed additional steps beyond to enter the ESXi configuration console to change the host name and the IP of the server ESXi 4 existing (4.0 U2) and import in vCenter if physically move one envirment to another server (i.e. a Server Blade environment vsphere 4 test to another box to Prod vSphere 4)?  Or are there additional steps necessary?

  Also, would there be problems within ESXi if just to swap hard drives, if the servers are of the same model (i.e. blades HP dl480 G6)

  It's a fairly simple process to change the name of host or IP address - http://kb.vmware.com/kb/1006710.  If the host is currently bound to vCenter you can remove everything first.  Then you'll just join the host of your vCenter production after your changes in the same way that you would join a new host.  You can check the file on ESXi hosts to make sure that the host name is updated correctly and see if all custom entries has been added.

  You can swap disks, but you may need to correct assignments NIC after and you will need to check things if you use remote storage.  ESXi also uses the MAC address of the vmnic0 for the MAC from the management port so you'll want to update that to avoid the possibility of duplicate MAC address should end up with the two hosts on the same subnet.

• 12 c change of target host name / IP without relocation agent

  Is there a way to change the configuration?
  
  Details: Target host has been added manually, agent has been deployed successfully, the host name is an IP address, dns does not work here.
  Now, the IP address has changed, I can not add a new host by using the new address, because em indicates the base directory of the agent is not empty...
  I just want to add a new host without removing the previous installation of the agent.
  Or even easier, change the configuration of the host (i.e., the name displayed in EM and host IP address).
  
  I'm a little confused, it seems to be is not possible, or I can't see it after searching for some time through the different menus and documentation.
  
  Hint, please?
  
  Published by: Gerrit Haase on 22.03.2012 12:27

  We tested the steps for re-point an existing to a new SGO without requiring re - agent push a binary agent. The same steps should work for what you are trying to achieve, although note that you need to remove the original objectives, both history of the target will be lost. The only piece that avoids this is re - push a binary agent. The steps are:

  1 stop the agent 12 c running with the command below:

  AGENT_INSTANCE_HOME/bin/emctl stop agent $

  2 remove the instance of the home agent:

  rm - rf $AGENT_INSTANCE_HOME

  3. manually delete the targets controlled by the agent in the EM console.

  4 create a new instance pointing to the new OMS:

  $AGENT_BASE_DIR/core/12.1.0.1.0/sysman/install/agentDeploy.sh
  AGENT_BASE_DIR = OMS_HOST =
  EM_UPLOAD_PORT =
  @ AGENT_REGISTRATION_PASSWORD =
  AGENT_INSTANCE_HOME =
  -configOnly

  We will get these steps added to the official documentation. Let us know if you're having trouble.

  Thank you, Mark.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• Can I change the host name and the IP of the ESXi servers?

  For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.

  I can change it directly? or view desktop computers will be affected by the change?

  This thread will help you

  Re: Hosts view change ESXi and Vcenter Ip addresses

  If you found my answer helpful, review the allocation of points by choosing answers useful/correct

• To change host vMotion PortGroup & VMK IP on a vDS PowerCLI

  Hi all...

  I have a lot of hosts where I need to change the IP address (not netmask, gw, etc.) and the VM my interfaces of vmk vMotion PortGroup.

  I have a list of servernames, new IPs and the vm portgroup.  I'm assuming that powercli can do but don't know where to start because all my hosts are now on a vDS.

  Any suggestions?

  Thank you!

  What PowerCLI version do you use? Make one

  Get-PowerCLIVersion

  The most recent version at the moment is 5.1 R2

• How to change the host name

  I have a lot of VSphere 4.1, ESXi 4.1 that I need to change the host name. Then I go in VSphere, highlight the host, set mode now, goto, DNS and routing configuration, the new host name change and restart, get fashion maint and host on the console of the host name ESXi said the NEW host name in DNS and routing it says the NEW name of host, but on the left hosts & Clusters discovered I still see the OLD host name... I try to add the new host name and it is said that there are already.  Is there something I missed >? >

  John

  the name to remember in the DB vcenter. one of the ways is to remove and add the vCenter.

• Problem of Listener after changing the host name & ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• Change the host name and the url of the Oracle Application

  Hello, I need help to change the url of Application Oracle
  OLD url - http:// appssvr.XYZ.com:8007
  NEW url - http://erp.XYZ.co.in:8002
  
  Help, please

  Hi Richa,

  Please go through the below mentioned Notes Metalink.
  You just need to change the appropriate settings in the context of requests ($APPL_TOP/admin/*.xml, location) file and run Autoconfig.

  341322.1 how to change the hostname of a stream of Applications using automatic configuration
  338003.1 how to change the host name or port of the database layer using automatic configuration

  Let me know if you still have doubts.

  Concerning
  Neeraj Sharma