1260sf 6: 6 - 1260SF envy want: replacing the HARD drive

Similar Questions

• HP Envy m6: replacing the hard drive

  I need to replace the hard drive on my laptop.  The disc type is ATA, Toshiba model MQ01ABD050, serial number 627JP0k1T, capacity-500 GB. The model of my laptop is hp Envy m6. I would like to replace with 1 TB hard drive, so its possible to replace the 500 GB with 1 TB hard drive, how much will it cost?

  Hello

  An example of what you are looking for is on the link below.

  https://www.Amazon.co.UK/Toshiba-MQ01ABD100-5400rpm-9-5mm-internal/DP/B009AYVNMQ?ie=UTF8&keywords=Toshiba%20mq01abd100&QID=1413837867&ref_=sr_1_1&SR=8-1

  Kind regards

  DP - K

• Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

  Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

  You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite L300-A13 - how to replace the HARD drive?

  I need to replace my drive hard because I got a disc error and I could hear noises from him. Someone knows the size of the current hard drive replace (either 3.5 SATA or whatever it is)?

  No space memory but actual size, so it can fit inside my computer and someone know a tutorial to replace by yourself?

  Hello

  To replace the HARD drive, you need a 2.5 HARD drive SATA interface. These 3.5 HARD drive you want to say are only for desktop PC s peut t used in laptops to buy a 2.5 so one.

  But it makes no difference which manufacturing you buy the HARD drive or the size. Just look for a 2.5 HARD drive SATA interface.

  Replace the drive is pretty easy: just remove the two screws on the underside of the cover of the HARD drive. You can exchange it.
  I know because I have the same laptop. ;)

• Replacing the HARD drive

  My laptop is model: HP G62 - 361TX NB PC all THE... My HARD drive I thnk not working not properly... I'll replace it... ghoulish u help me is this drive is Compatible with my laptop...

  Internal hard drive Hitachi 500 GB portable (Travelstar 5K 1000)

  Portable Device Type 2.5 inch spin speed disk capacity 500 GB drive HARD 5400 RPM Interface SATA 3.0 Gbps Memory Cache 8 MB average latency 5.5 ms average seek time 12 ms (read) reliability 600000 (charge/discharge Cycles)

  OR

  WD 1 TB computer internal laptop hard drive (WD10JPVT/WD10JPVX)

  DRIVE CONFIGURATION Handheld Device Type 2.5 inch HDD Drive capacity 1 TB Spin speed 5400 RPM Interface SATA 3.0 Gbps Cache Memory 8 MB transfer rate 150 MB/s data transfer rate (shared with host) 3072 MB / s Non-recoverable Read Error 1 per 10 ^ 14 reliability 600000 (charge/discharge Cycles)

  OR

  Solid State Drive Hybrid 7 mm thickness portable Seagate internal hard drive 500 GB (ST500LM000)

  DISK CONFIGURATION Handheld Device Type disk drive HARD Interface SATA 6.0 GB/s 500 GB capacity

  Please help me with this...

  One of them will work, but of the three, you want the Seagate hybrid car. It will be faster, even if more expensive.

  Here is your Service Manual:

  Manual

  Replacing the hard drive begins on page 4-8.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Qosmio X 500 - 10W - can I replace the HARD drive with another?

  Hello

  I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

  Thank you

  Hey,.

  Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

  Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
  750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

  Anyway, you can buy the 750Go you mentioned that it will work. :)
  ?

• replacing the hard drive G62

  So, I got the error hard drive 1 303 and discovered that means that my hard drive went bad. I would like to get another hard drive has the same amount of space or more. I would also like to know what type of ram is compatible with my laptop for later possible purchases. My laptop model is HP G62 Notebook Pc and the product id is XH058UA #ABA. I also can't any thaan further than the windows boot screen, so thanks in advance

  Hello

  Your laptop is considered as coming with a 320 GB drive hard, but you can install just as easily a 500 GB or 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 57 of your & Maintenance Guide.

  Regarding the upgrade your Ram, the maximum is only 8 GB (IE 2 x 4 GB Modules) - an example of an upgrade appropriate can be seen on the link below.

  http://www.crucial.com/USA/en/HP-G62-339wm/CT5305514

  Kind regards

  DP - K

• Replacing the hard drive for acer aspire laptop 7745

  Will need to replace the hard drive in wifes aspire 7745 laptop.  Want to know where to buy and if I can upgrade.  Searched the Internet, but having trouble getting information on who has the player that fits laptop 7745. And if I find one can I use the recovery of the 500 GB disk that's about this now.  Any help would be appreciated and thanks in advance

  Get it fixed, went to Bestbuy bought a hard drive and the restore disc that I was crazy when I got the laptop first and they went immediately without problem

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• Failed to retrieve after replacing the hard drive on my DV6

  I replaced the hard drive on my DV6.  Insert the recovery discs, I had done and went through the process.  At the end it rebooted and was told that he failed.  Says to put 1 recovery disc in and try again, but just a loop even message.

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Windows XP does not work when I replace the hard drive or motherboard... ?

  How can I make winxp work if I replace the motherboard or my HARD drive;
  The question another way: I want to install Windows XP on the motherboard so I'll have to take the hard drive and connect it to another motherboard... How can I make because it open of course used... It is is not need any file b4 replacing or anything?

  That may depend on whether you have a copy of Windows XP comes with your PC, to which it might be bios locked the card mother origonal.
  If you have a retail version of Windows XP, you must perform a repair installation and install the new drivers of motherboard
  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If you simply replace the hard drive, you reinstall Windows XP on the new drive, if it is a sata drive, it might be necessary to use the F6 option to install the drivers for the controller sata disks, at the beginning of the installation

• Restore questions after replacing the hard drive

  I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

  Hello

   
  Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved
  
  You can check out the link and check if it helps:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
  If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also check out the link:

  Recovering your files in Windows 7
  http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx

   

• Pavilion 15-n249sl: replacing the HARD drive

  Hello

  I need to replace my hard drive because I need a bigger HARD drive (I have a 500 GB, I want to 1 TB)
  I can buy one of the same type (SATA3) or do I have to buy one from a store hp?

  I have compatibility problems?

  Italian:

  Devo auswechseln he mio drive hard need di uno più great pole (don't ho da uno 500 GB, 1 TB I like)
  posso comprarne uno dello stesso tipo (SATA3) oppure devo per forza comprarne uno da uno store hp?

  Avro problemi di compatibility?

  emanueledomingo wrote:

  Hello

  I need to replace my hard drive because I need a bigger HARD drive (I have a 500 GB, I want to 1 TB)
  I can buy one of the same type (SATA3) or do I have to buy one from a store hp?

  I have compatibility problems?

  You can at any retail Branded 2.5 "SATA HDD 9.5 mm thickness, 1 TB will be OK - no problem with that.

  Looking at the Manual - Page 59-61, the replacement procedure is not just easy to him if you're not used to it, needs great disassembly & may void the warranty if you do it yourself if under warranty. You can Contact HP for this.

  This would be nice.

  HP would replace the HARD drive for free, if that came with the laptop failed in respect of the warranty period.

  Concerning

  Visruth

• no boot device after replacing the hard drive

  Hello world!

  My laptop (MSI) has erupted recently in my face (Fried GPU seems).  As I had and liked (Acer laptop) which had a broken hard drive, I have supported up to my datas and replaced the hard drive of Acer (one broken) with that of my MSI (latest laptop)

  When I start the computer I get the message no bootable device: "no boot device - insert boot disk and press any key any."

  I am not very savvy computer science, but I feel that it is perhaps due to the version of Windows I was using: my Acer running on Windows 7, when my MSI will run on window 8.  Could someone confirm if this has something to do with the startup problem?

  Here's what I managed to do or find on the problem.

  When I go into the BIOS, I changed the order of precedence so that my hard drive is the first priority.

  There is absolutely no USB or SD card in my computer from where he might try to start (unless he's trying to start from an empty?).

  The BIOS is able to tell me the model and I installed the hard disk MSI series so I guess that it is able to detect the hard drive, but can not find startup data in it (that's why I think it's maybe because it isn't the same window).  In addition, the hard drive lights up when I start the computer (and he did it on the MSI laptop too).

  Even if the hard drive seems to be detected, I always tried to unplug and reconnect it a few times to make sure it wasn't just a matter of bad connection.

  On many web sites, they recommend taking any diet and empty any current computer before restarting: unfortunately I can not do because the Acer laptop has a battery that is not easily accessible as newer computer (it cannot be removed from the outside, I need to open the laptop to get it and it is so I can know what it look like and how to remove it)

  My brother managed to recover data from hard disk of MSI with a USB device that plugs on it, so I don't think it's broken.

  The computer is an Acer Aspire 5830TG.  Replaced hard drive is a toshiba MK6459GSXP (works on Windows 7) and the replacement is a WD7500BPVX - 22JC3T0

  I want to apologize if my English contains errors, it is not my mother tongue :)

  Please let me know if you need more information and I thank you for your help!

  Hello

  You cannot move a hard drive with Windows 8 on it from a computer and put it in another machine that were previously running Windows 7 and expect it to work.

  It will not.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  And even if it would work physically, legally you cannot transfer the license of Windows 8 of the MSI laptop Acer laptop to your situation:

  Read this information:

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  See you soon.

• Need to replace the hard drive on laptop G56

  Hi all

  I have a hp g56-108sa laptop. I had the hard drive replaced once under warranty and there yet again, but I don't want to not wait 10 days so he could be replaced again if I want to get a new drive hard but with a greater capacity (mine is 250 GB and I'm looking for ay buying a 320 GB one) , and I want to replace. Is this feasible?

  I ordered a few partners hp recovery disks that I stupidly didn't create a when I had the chance. The reason I ask this question, it is that I've read that other people have had problems by replacing the original drive with the largest on laptops

  Thank you in anticipation

  Pat

  Hello

  You should have no problem with a 320 GB HARD drive, the drive on the link below is an example of one that would be perfect for your laptop.

  Hard drive 320 GB

  The procedure to replace the hard drive is detailed on Page 37 of your & Maintenance Guide.

  Once this is done, just use the recovery disks you ordered to reinstall the operating system on the new drive - they will also recreate the Partition D of recovery on the new HARD drive.

  Kind regards

  DP - K.