13-inch Retina MacBook Pro fan does not turn

Similar Questions

• Retina MacBook Pro 2013 does not recognize battery

  Pelease HELP, I SAID ALL THIS

  http://youtu.be/Inoj8PwyQoo

  It works just to turn on the computer, but everything was really slow, the fans were going crazy, no battery icon, I went to the report on the system and there is no info on the battery

  . IT doesn't RECOGNIZE THE BATTERY IF A PLUG the MagSafe Off will power SHUT DOWN

  ICHECKED THE BATTERY CIcles 1 week ago and it was 540, everything was perfect, now I tried to access the reporting system and there is no info on the battery

  Before any of this happens I just watched a movie and it exploded

  I have already reset the SMC and nothing happens. I think I did good MSC because the MagSafe has changed colors but nothing more

  I don't know what to do thank you

  Mac book pro retina early 2013

  Updated with a software update, I have the newest one

  Help please

  PS: Sorry for my bad English

  Open system information > power and this post of your MBP:

  (Make sure that the charger is plugged)

  

  Run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is not final.

  Ciao.

• Apple MacBook Pro 2012 does not start

  2012 Apple MacBook Pro.  Does not start.  Just get the folder with the question mark.  gives possibility to restart with the ERD, but the model doesn't have a hard drive.

  Help the college student needs to access files on the hard drive for the finals.

  Thank you

  What happens when you start to recovery

  OS X: on OS X Recovery - Apple Support

  and repair/disk startup disk via disk utility which is located in the recovery of aid?

  If it is repairable so reinstall OS x, as the article says

  Also here is covered:

  On the screens, you see when you start your Mac - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• MacBook pro screen does not light

  Hi, I have a macbook pro 13 inch edition at the beginning of 2015. A few days when I tried to turn on my computer, screen not turn on including the lamp to the rear logo. but I heard the startup sound with the keyboard backlight on. I plugged the computer to an external monitor, then I saw in this computer monitor works fine. I tried to make configurations LANDAU and SMC. screen still does not work. but sometimes laptop screen lights up, then when I restart the computer, the screen will come up again. help me guys what should I do? Thank you

  If you're lucky, the connection to the screen is not correctly connected or must be replaced.  If you are unlucky, the display needs to be replaced.  Make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• MacBook Pro 2012 does not SSD

  Hello

  So a few months ago, I upgraded my MacBook Pro (13-inch, mid-2012, OS X 10.10.5) with a SSD Samsung 850 Evo. Things were much faster and the other Corsair CMSA16GX3M2A1600C11 Apple Mac 16 GB (2x8GB) was also nice.

  One day, the Macbook has no more SSD, start repair of OS X and reinstalling did not help. If at start up the Mac, then applications suddenly crash randomly.

  Strangely, exchanging for 500 GB disk drive factory solves all problems.

  In addition, I can boot OS X from the SSD via USB3, but internally it does not work.

  I tried different SSD from Apple, Sandisk and Samsung, which were to be properly formatted or have OS X installed, but the Macbook simply does not accept them and either shows a blank screen or screen issue/question mark. With a support boot utility disk sometimes recognize them and sometimes not. The internal SATA cable has also been replaced by about 5 different cables, but that has not solved the problem. Replace the RAM, unplug the various components such as Superdrive or Trackpad as well.

  I can use the Macbook Pro normally but being prevented from using a SSD internal is a serious drawback. My next plan is to try the drive Caddy + SSD boot drive solution but somehow I fear that it could also do not work.

  Wouldn't be a kind of failure of the Logicboard? I'm certainly not an expert, but don't really see any other reasons.

  Thanks in advance!

  any SATA enabled the logic board on a MacBook Pro after that 2007 should accept an SSD (I guess that ANY Board with SATA connectors actually are eligible for one SSD)

  You may have damaged something with the Commission or if you are using any 3rd party with the DSS software is might be incompatible.

  Readers work on other computers or is there no option to test this?

• MacBook Pro (2014) does not charge despite an orange light when plugged

  Hello

  So my 2 year old Macbook Pro (retina) does not load when it is plugged in - spite, projecting the orange light. I have a battery (20%) and it is reduced whenever I use it and will be soon drained.

  Some of the things I've tried

  -Reset SMC - tried but no change after

  -When I use the mac when it is plugged in the battery icon in the top bar done see the support - but there is no increase in % of the battery. Continuous use it starts to fall.

  -During use (and what battery is plugged) - I checked the report system (about this Mac section) - in the energy sector - it is said does not charge (despite being connected, the orange light and the symbol in the top bar)

  What do you think guys that it is? MLB? Battery?

  What I have to replace or can it be fixed?

  If you have the Apple store, take the machine evaluation.  There is no charge for this, but you need an appointment.   The first thing I would check would be the cable.  You have another machine to test this with.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• MacBook Pro 2008 does not start. WHY? (Fix included)

  I have an old soldier, a Macbook Pro in early 2008. Like many others with MacBook as old as mine, I had the problem of my Mac, no start, showing only a black screen when I lit. He came to the point that I roll the die, each time that I chose to shut down the computer, I was wondering if it would ever start again. After taking in to get fixed twice and he'd end up and die after a few weeks, I tried a quick (and free-_-) fix I could do at home. (Note this isn't my question again, because I want to help some people who have the same problem, I had). I found a (I hope I remember where) online and I still thank the poster that has name up to this day.

  The idea is the laptop overheating, refresh, then cross your fingers and hope that it starts. Here are the steps I followed:

  1. Remove the battery (if you can) and connect your Macbook.
  2. Find two pillows for "sandwich" of your Macbook with.
  3. Turn on the Macbook and put it on one of the UPSIDE-DOWN cushions. (This is critical!)
  4. Ask the second pillow placed on the computer (always upside down) and leave for an hour and a half, running. (It may help to cover pillows with more effective coverage trap heat).
  5. After that he did heating, place it in a room different upside DOWN and leave it for at least 8 hours. (Night works too).
  6. Turn UPSIDE down and pray that it starts. Repeat the operation if not... But if this is the case, you CAN use the computer right up. Just leave the upside when you have finished using it.

  WARNING! This Act of overheating probably detrimental to the health of your computer. My computer is running stronger and a little bit slower than before, but if it does not, what really does anyway? My point is, there is a risk that is innate to this process, although I've never had any real problems with it.

  Now for my question: WHY? Why the computer have this problem in the first place? Even if I found a solution, I would know exactly what I'm fixing. I was curious and were all that I could never find solutions, but no real explanations. If you have any ideas or knowledge in the field, I would greatly appreciate a response.

  In addition, if you have any questions about the fix, please file an issue. This post is also a way to help you guys as well.

  This particular type of MacBook frequently has graphic problems. This can be corrected (more or less) by "cooking" the logic board. What you are essentially a type of cooking with a mild detergent. And it has been done before!

  https://www.iFixit.com/answers/view/9045/MBP+A1226+logic+board+last+resort+fix+f or + nVidia + video + chip

  There are more rigorous methods, like this: https://www.youtube.com/watch?v=Ztzv2OlQJuU

• MacBook Pro starts does not after crash

  Hello

  first... Sorry for my English ;-)

  I have worked on my MacBook Pro (early 2011) and the screen was distorting the market. I did a reset hart (by pressing the power button / stop to stop). After that he starts not more. I erased the MSC, the Cache of the NVRAM. Tried to boot in recovery of the Internet. But I get only a blank white screen and the fan at full power. Beginning not more.

  What it could be and what can I do?

  Thank you very much!

  Your MBP is perhaps in this category:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Make an appointment with an Apple store genius bar and tested it.

  Ciao.

• problem installation creative cloud on macbook pro.  does not accept my login information for installation even if I opened a session in Adobe

  Initially, I installed Photoshop on a PC only to find out that the PC has not been up to the task.  Bought a MacBook Pro today.  When I try to install, CC does not accept my login.

  Try to enter your system Mac password when your Mac asks permission to install

• my macbook pro dose does not recognize my g drive

  my macbook pro is not recognize my g drive, I have reset the pram and am stuck pleas help

  Open the Finder.

  In the Finder menu bar, click Finder > Preferences, and then select the general tab and then make sure: external drives is selected.

• MacBook Pro Serial # does not appear in the search

  Hello

  I'm looking at buying a Macbook Pro, but when I am looking for the serial number I get no results.

  I would like to see if it is legitimate and under warranty. I tried the search tool of warranty on Apple's site, but no result.

  I would like essentially some advice, should I call Apple?

  Thank you

  < Published by host >

  Post edited by: MrsTeriyaki

  Yes, contact Apple support.

  Contact - Support official Apple

  In addition, it is not prudent to reveal the serial number in open forums, I asked so that it can be deleted.

• MacBook Pro 2007 Does not show the headset as an output option

  Hi all, I have recently restored a MacBook Pro 2007 for my college work and it works well... Except for one thing. The wearing of the helmet.

  I wish I could use my headphone port that I will do a Final Cut Pro here job and likely to spend much time in the classroom when playing audio through the built-in speakers will be disruptive.

  I've already replaced the left i/o board with a working version (as the previous owner had neglected it and broke a record in there.) Villain...

  If you're wondering, the computer is currently running El Capitan and it seems it well, apart from the question with the headphone jack. I searched in Google for this issue, and most of them seem to be much easier to solve because their use of the helmet IS shown in system preferences, while mine is not. A little weird issues really, especially as the line works perfectly fine! Just not the headphone port...

  If anyone can spare a moment to help me with this issue, I would greatly appreciate your help. I love my MBP. So, I want it to work as it should.

  Thank you very much

  Problem solved! A problem with the IO card. I've fixed since the question and making works normally.