14.04 Kubuntu running Reader 6.0.3 with WIndows installed 8 - crashes on vmware shutown
I have been using vmware in recent years in an installation of kubuntu 12.04 without any significant problems. Recently, I decided to do a full reload of the machine and installed a copy of 14.04 vanilla kubuntu. All right, I ionstalled and launched the vmware player. Located at the instance and launched my Windows 8 operating system. He asked to be upgraded tools, to 6.0.3 build-1895310, that I be allowed to do. However, once that I loaded Windows to stop after a few seconds the blocked system. This happens whenever I close the vmware session. I have checked the syslog and don't see anything remarkable prior to the accident. This is the first time I had problems with vmware products, is there a good way to debug the cause of the accident? Has anyone seen a similar problem? Thank you in advance for your help!
I solved it. Full non-everything we discussed so far. The system has no any active swap space. It has 4 GB of RAM, which should be a lot... but for some reason, the swap has 168KO in it once vmware launches... and it is stable as can be. Only a GB of RAM is used, but it seems that vmware needs the swap to be present.
Thank you for your help, advice and support!
Tags: VMware
Similar Questions
-
I can't read my dvd - r with windows media player
I can't read my dvd - r with windows media player. Any help much appreciated. Thank you.
I can't read my dvd - r with windows media player. Any help much appreciated. Thank you.
See KB article: -.
You cannot play a DVD - RW or a DVD + RW disc using Windows Media Player or Sonic CinePlayer -
U2413 SD card reader does not work with Windows 8.1
My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?
I have the same problem here too.
The driver above does not work.
-
I get a message from DLL run when starting my laptop with Windows 7
I get a message from DLL run when starting my laptop with Windows 7. One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?
Hello
Do not assume that any malware has been removed.
This is probably the result of malware then do a very thorough check and when the system
is clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
running webroot essentials of security with windows firewall
I installed essentials of webroot internet security on my PC. I notice now that my windows firewall is turn off and replaced by webroots firewall. I also noticed that in the centre network and sharing that my network discovery and file sharing are on. Also that I'm on a public network. Before I installed the webroot internet security essentials I was always on a home network and the only thing on was the password protect and sharing. Is this normal after the installation of the webroot internet security essentials. I used to run spy sweeper from webroot with antivirus, but just to switch to the bulk of new weroot. It seems webroot makes these changes to my PC. Is this normal and safe? Thank you for your time.
If you install according to their values by default, she would probably turn off Vista firewall.
http://www.webroot.com/en_US/index.html
You need to ask these questions Webroot Internet Security Support team.
It is their safety program, not Microsoft.
Cheer.
Mick Murphy - Microsoft partner
-
SD reader on elitebook 8730w with windows 8.1 does not work
Hello
I have an EliteBook 8730w sinds 2010 and I just installed Windows 8.1
Now, I don't have access to my SD reader
According to Device Manager, driver SD reader is up-to-date and working, but I don't see the SD drive in the file browser
The SD reader is a RICOH
In Device Manager, I have some problems with other devices
(1) system base unit
(2) system base unit
(3) fingerprint sensor
(4) unknown device
I guess that the problem must be in other devices
Is there an organization that had the same problem?
Thank you
Hello:
Use the driver drive of W7 card from the support page and the driver of your PC.
Use the fingerprints of the support page sensor driver and the driver of your laptop.
Unknown device:
-
Running a server of Freelancer with Windows XP and have problems with updates
I run a server for a game called freelancer who has been released by Microsoft in 2003. My problem is that, in recent years, when I tried to get the server working after doing a clean install of WinXP Pro and get the updates, the server hanging and not start working properly. After several installations with various combinations of what has been installed after the OS, I finally got the server works, but get this: the server runs only on Windows XP with NO updates. WHY?
I have a theory that I can't prove it on WinXP... When Freelancer was released in 2003, XP was new and she has no security features there now, and I think that one or more of the mess of updates with the server of DirectPlay 8 which is integral to the operation of the server. Of you Eggheads Microsoft must know what I mean... I don't know enough on XP to do more to make a guess, and it's my guess...
Thank you for allowing me to escape,
TanamirHello
DirectPlay has been moved to support engineering and is an obsolete API. This was done mainly because of security problems and the fact that most of the features of DirectPlay is no longer relevant. TCP/IP is the ubiquitous network protocol and support for the head-to-head modem, serial port,
NetBIOS, IPX and other suppliers is no longer relevant. Native API for TCP/IP in Windows is WinSock, and the usefulness of the library is so limited.
There are technologies in Windows XP SP 2 or later version that provide server under protocols of discovery to manage the features of lobbying (P2P and PNRP), and many third-party solutions exist for matching. Future Microsoft technologies for this will be based on WinSock and not of DirectPlay.
Support in future versions of the operating system will be determined primarily by the problem of application compatibility and will continue to be available through the Platform SDK for those supporting legacy streaming of DirectPlay applications.
For reference: error messages when you try to connect to the game multiplayer matchmaking: http://support.microsoft.com/kb/829151/en-us
-
Unable to read the .avi files with Windows Media Player 11 on XP
Original title: Media player upgrade was worse than basic
I recently updated my Player multimedia media Player 11 and now it won't play movies from AVI file that I used to be able to play easily on the outdated version. Why is this?Hello
Do you have an error message when you try to play with Media Player AVI files?
When you try to play a file that uses a codec that is not installed on your computer, Windows Media Player attempts to download the codec from a Microsoft server. If the
Codec is available, the Windows Media Player installed on your computer, and then bed file. However, if the codec is not available on the server (for example, because)
the codec not created by Microsoft), Windows Media Player displays a message that your computer is missing a codec.In some cases, the file you want to play uses a codec that is not available or compatible with Windows Media Player. When this happens, you may be unable to use Windows Media Player to play this particular .avi file.
You can consult this article for a solution:
You receive an error message when you try to play an .avi file in Windows Media Player
http://support.Microsoft.com/kb/279242Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can I run CS6 under creative cloud with CS6 installed perpetual?
Hi people
I have finally last AAM to launch and you'd like to try creative cloud.
But I have a registered copy of perpetual CS6 already installed.
What is the recommended method to try creative cloud in this case?
I'm sensitive time, as CS6 is vital for me. Impossible to have a time out.
Thank you!Do you use a suite? If so you can choose one of the applications and select help > deactivate to remove activation and license information. You can then restart the applications and choose license of this product. You then enter your Adobe ID related to your Creative cloud product and it is advisable to use then your CC license.
Your original message says that your use of the CS6 was sensative time and mission critical. So there are no problems with the solution should I do not advise this until you have enough time in case something is not bad.
-
Acrobat Reader version compatible with Windows 10?
What is the version of Acrobat Reader that is compatible with Windows 10?
CD player and player XI are compatible with windows 10. (Adobe Acrobat Reader DC install for all versions )
Kind regards
Rahul
-
Original title: unexpected reboot
My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
Maybe the problem is related to this message in log file:
SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
Source: Service Control ManagerI would be very grateful if you can help me.
Hello
Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.
Steps to select Disable automatic restart on system failure option:
1. reboot the computer
2 start typing the F8 key
3. you get it anticipated the startup option window
4. Select DisaDisable automatic restart in the event of system failureStep 2: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer. -
PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.
I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!When you view this file.
If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.
-
What is the latest version of Adobe Reader and Flash Player, I can install it on a Power PC Mac running OS 10.5.8?
Adobe Reader: http://www.adobe.com/products/reader/tech-specs.html#9
Get it from http://get.adobe.com/reader/enterprise/ (select Mac OS PowerPC)
Flash Player: http://forums.adobe.com/thread/895134
-
LT1423p is not running at the native resolution on Windows 8.1
Hello
I got touch mobile monitor of LT1423p for about 6 months and it was working fine with Windows 7 and my laptop T440p. Recently upgraded the laptop with Windows 8.1 and am having problems with mobile monitor not turns not not at a resolution of 1600 x 900.
It works at all resolutions except 1600 x 900 (for example it is fine until a resolution up to 1440 x 900). However if I select the resolution 1600 x 900 (whether through normal windows screen resolution or dialog via the link screen Lenovo Manager) he works at 1280 x 1024 resolution EVEN IF Connection Manager dialog default resolution and display Windows screen it's running at 1600 x 900.
It's a very strange problem. Initially, I tried with the default LT1423p drivers and have since upgraded the video drivers and displaylink drivers to the latest version.
Looks like people here are run with Win 8.1 successfully so I wonder why it does not work for me.
Advice greatly appreciated.
Thank you.
Fixed my own problem in the end
Looks like it's a strange wins scale question of resolution 8.1. Had to tick the option 'Let me pick a level of scaling for all my views' and the problem was solved.
Problem and the fix is described in the http://www.askvg.com/fix-bold-blurry-or-hard-to-read-font-problem-in-windows-8-1/
-
Original title: card video questions
My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?
Hi TheRealBradB,
· The computer is on a domain network?
You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.
GeForce 8400 GS video card
http://www.nvidia.com/page/GeForce8.html
You can run the Autodetect your GPU and check the drivers.
Also contact nVidia support for help on the issue.
NVidia support
http://www.nvidia.com/page/support.html
Hope this information is useful.
Maybe you are looking for
-
Full updates from windows computer
I reset my computer to original settings after I had filled the hard drives. Since the reset of all this I ran is updates of windows and drives are 80% full just with the Windows updates. The system is Vista, and readers are 80 GB each. My question i
-
Download old folder after you reinstall windows.
I had to reinstall Vista because I forgot my password. I have all my other programs such as Excel and word, Access and necessary to get how to make their return so I can use them
-
DVP11 - Display Driver stopped responding and has recovered
Hey guys,. Last month I had problems with the display driver. Sometimes when I'm on the desktop (using Microsoft office products), the screen entirely black flash mode for a few seconds, once my office reappears, a message will be will jump to the t
-
Envy of devices not finding hp printer 5530
We have been printing our ipad, kindle and galaxy phones for the last few months with no problems, but since there are two days all three are saying 'no air printer found. ' Have you tried switching devices, printer and router completely off but noth
-
When I wake the PC, the display is dimmed
"Wake up Settings. When I "wake up" my laptop from sleep, that he doesn't wake up with normal brightness-it remains grayed out. I have tried everything to wake up with the brightness of the display but could not find the solution-HELP.