15 - f003dx: full recognition of the Ram

Similar Questions

• Satellite P100 - 387 (PSPA3E) - how can I see the full 4 GB of RAM?

  Hello.

  I installed 4 GB of RAM (2x2gb) on my laptop. After that, I see in the BIOS (version 4.40) 4 GB, but 32 bit of openSUSE 11.1 OS I see only 3 GB. I know that 32 bit OS does not support the 4 GB of RAM.

  I try to boot from openSUSE 11.1 x86_64 live CD and can see only 3 GB of RAM.

  How can I see full 4 GB of RAM?

  And what is shown in the BIOS? Total amount of 4 GB?

• Tecra M1 model PT930E - how do I find the RAM slot for upgrade?

  Where is the RAM so that I can add 1gig and how do you access it. Bill Upchurch

  Hello

  Two years ago, that I had Tecra M1. The two RAM modules are placed under the keyboard (under the insulation).
  To have full access, you must remove black plastic placed between the screen and the keyboard. Keyboard is fixed by three screws.

  Remove and rotate the keyboard and lay it on top of the palmrest.
  Increase the insulator covering the memory locations
  Press the two latches outwards. One end of the barrette memory will pop up.
  Enter the memory module and pull to remove the memory module

  That's all you need to do.

  Good luck!

• Satellite U200-181 - Ubuntu 9.10 does not recognize full 4 GB of RAM

  I have ubuntu 9.10 with the 64-bit kernel, but system see only 3.2 GB of memory.
  BIOS display 4096MB!

  Hello!

  Normally if the BIOS shows the full 4 GB of RAM, the modules are recognized properly and in this case it s a Ubuntu problem I think.

  Have you checked how much RAM Windows poster? But you need a 64 bit version of Windows to use the entire capacity.
  And are you sure that s a 64-bit version of Ubuntu? 3.2 GB of memory are typical for the 32 bit OS

• HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

  I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

  OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

  To get the background you need to:

  1. Remove all the screws on the bottom.  (Must be 12 total)
  2. Remove the drive from DVD (Yes it does not).
  3. Finally, carefully separate the case around the side.

  After that, you should have full access to the slots of RAM and hard drive.

• Is it possible to upgrade the RAM on the Aspire One Cloudbook 11?

  I was wondering if it was possible to upgrade the RAM or any which component of memory on my laptop to improve its performance. Currently, my system works fine, I am just worried because it does feel like the system is running close to it's maximum capacity. I don't want to burn it. Thanks in advance for any comments that will be offered to the top.

  Hi usagent86,

  In any case to upgrade memory MEM to 64 GB?

  No 32 GB mem is directly soldered on the motherboard.

  Running out of room after all the updates from microsoft!

  Sorry, but what you mean? MEM is full?

• I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

  I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

  Hello

  Here is the information from your other question here about it:

  "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

  "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

  I suggest that you save your data and reinstall the operating system properly.

  There are several methods to reinstall Vista.

  See what methos works for you.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Will be (1.5V ddr3) work on the ram ddr3l ram slot

  Hey guys I'm looking forward for purchase of ram, but I can't, can ddr3 1.5V the ddr3l working, and what happens if you use ddr3 in ddr3l ram - ram slot

  Hello Shariq,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are considering buying the RAM of your machine, but saw the problem by choosing one for your computer.

  I understand your concern, and I will definitely help you solve this problem.

  Before going forward, I would like to inform you that there is no such thing as DDR I RAM.  Did you buy ranked RAM DDR - I - if so, please provide full details of the manufacturer and reference number.

  Your motherboard uses RAM DDR 400 (PC 3200) or slower. You can find it at the source of many

  I suggest you contact the manufacturer of the computer to get the best information about the hardware in your computer and get the best Advisor on RAM compatible for your device.

  Hope this information is useful. Please let us know if you need help with Windows.

• Now I am unable to get the full screen on the secondary monitor. How to fix?

  Now I am unable to use the full screen on something else than my primary monitor.
  Years, I just clicked full screen on Youtube or anything else, and he would go full screen on the monitor that the program was on.
  What setting changed
  I'm running an AMD ATI 5450 Chipset Graphics Card Runinng 12.6 Software.
  4 GB of RAM Windows 7 Pro 64-bit

  Hello

  1. are you not able to use the full screen on the main or secondary monitor?

  2. what happens when you try to maximize or use mode full screen?

  3 did you changes to the computer before the show?

   

  Method 1: Updated display adapter () AMD ATI 5450) drivers and see if that helps.

  Download here: http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5450-overview/pages/hd-5450-overview.aspx

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   

   

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions  

   

• Why my video stop during the ram preview?

  I have adobe after effects cs6 and I click the ram Preview button and it begins to make the green line through my video, but it stops during rendering and he started playing my video only where it made which is not even close to rendering finished. I tried just add this option to display the queue and make just outside, but the result is a video slowmo. Also, when I import the video, the video is in slo mo so I decided to look to fix RAM but he stopped and played at full speed, but only a small part of it, please help.

  FAQ: Why preview RAM only play in my composition?

  FAQ: Why my huge output file, and why didn't he play back smoothly in a media player?

  Start here learn After Effects:

  http://Adobe.LY/AE_basics

• during the RAM Preview and reading frame counters

  I understand that I should be able to display the number
  of the Treaty currently framework during a RAM Preview
  in both the meter of timeline (in frame display mode) and in the info panel.
  This does not work for me, and I'd like to see if I'm missing something.

  This is the State of the counters with a current RAM Preview.
  The only images update count is at the bottom of the composition window,
  and it could not be visible during the processing of a RAM full screen preview.

  RAM PREVIEW CURRENT

  

  This is the status of the counters during the RAM Preview playback.
  Playback CTI is roughly 90 of 912 frame, but the counters at the same time the
  Chronology and the compose window are frozen at zero, while the Info Panel
  is frozen in the last number of the frame in the scenario (the last rendered image).

  
  

  READING OF THE CURRENT RAM

  

  During the reading of the space bar, only the counter the composition window displays
  the current frame.  The meter of the timeline is frozen in the frame number where
  the CTI was stationed during playback started (in this case, frame 0).
  The info panel displays only the playback framerate.

  READING OF THE STANDARD PREVIEW

  

  If I stop playing RAM Preview or standard using the space bar
  the meter of timeline updates to the frame of the CTI, but if playback resumes
  the frozen counter stays where ICT was parked at the resumption of play.
  I feel this behavior using frames, timecode, ft + frames and using
  "To present" the RAM previews.

  Please tell me I'm doing something wrong.

  > I can't seem to get a current account in the timeline will appear a rendering or reading circumstance

  This does not happen.

• ORACLE uses the RAM.

  Hello
  I have an ORACLE 10 g R2 on Windows Server 2008 64-bit DATABASE.
  
  Now, one day he uses all of the physical memory in which is 10 GB. Then all of the system and the connected clients get very slow or they disconnected.
  
  I almost * session of 350-400 * on my database *. I see in the task manager that the RAM is increasing constant & reached the max limit.*
  
  In the AWR report that I got from the EM Console , it is said that the CPU usage is very high, but in the Task Manager in windows Server 2008 64 bit its hows, 30-40% CPU utilization , which is pretty good, but RAM becomes FULL and creating the problem
  
  What to do in such situation? Please let me know any solution or let me know in which direction to focus...
  
  Thanks in advance...

  create pfile from spfile and delete the line * .db_block_buffers = 524288 can create spfile from pfile

  sqlplus.....
  create pfile='' from spfile='';
  
  edit  and remove the line with db_block_buffers
  
  sqlplus....
  create spfile='' from pfile=''
  startup
  

  HTH

• How you upgrade the RAM on Mac mini (end of 2014)

  The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

  I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

  I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

  So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

  I guess there is only one slot (pinout) and it is probably welded in.

  No, they were serious

  the RAM is welded in there. You can not remove it.

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?