Will be (1.5V ddr3) work on the ram ddr3l ram slot

Similar Questions

• Satellite U200 163: where can I find the RAM slots?

  Where can I find the RAM slots?

  Hello

  As much as I know there is no RAM Bay at the bottom of the unit and it is so just only one possible place to the RAM slots
  Slots seem to be hidden under the keyboard.

  In order to get access to the RAM, you will need to remove the keyboard.
  Usually, it is not very difficult but if you have no experience with this dismantling then you should ask a technician for assistance.

  But here's a few details;
  Keyboard is fixed with 2 screws. They are hidden under the cover of thin plastic under the line of F1 to F12 key.
  Remove the plastic cover, remove the screws, then you could remove the keyboard take note; the keyboard is connected to the motherboard with the flat cable.

  So don't use force!

• Will be CC allowed to work outside the country of origin?

  I am a photographer who often works outside the country.  If I'm forced to use this creative cloud licenses, it will be a problem, try to activate again if I am out of the country, in that it was initially activated?  In addition, he reactivate if I'm in a country that is not supported by creative cloud?

  I use a number of other licenses based cloud services and this has been a real problem for me.

  Hi there, what we have heard you should be able to travel with your membership creative cloud without problems.

• computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

  computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

  You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

• Tecra M1 model PT930E - how do I find the RAM slot for upgrade?

  Where is the RAM so that I can add 1gig and how do you access it. Bill Upchurch

  Hello

  Two years ago, that I had Tecra M1. The two RAM modules are placed under the keyboard (under the insulation).
  To have full access, you must remove black plastic placed between the screen and the keyboard. Keyboard is fixed by three screws.

  Remove and rotate the keyboard and lay it on top of the palmrest.
  Increase the insulator covering the memory locations
  Press the two latches outwards. One end of the barrette memory will pop up.
  Enter the memory module and pull to remove the memory module

  That's all you need to do.

  Good luck!

• DDR3 instead of the evil DDR3L?

  Hello comrades,.

  I just bought a module of 8 giga of ram sodimm (MEMORY of KINGSTON KVR16S11/8 1600 MHz SODI)

  and after installation my laptop (dell inspiron 15 3542) has not started to give me a two beep. So I wonder is my new ram broke or the my laptop can not handle with siple ddr3 RAM?

  Thanks in advance.

  Kemelalive,

  Here are the specifications of the memory of the Laptop Inspiron 3542.

  Module connector memory this system has only one memory slot.
  Capacities of 2 GB, 4 GB and 8 GB memory module
  Type of memory 1600 MHz DDR3L-'L' represents the low tension.
  2 GB minimum memory
  8 GB maximum memory

• Photoshop CS5 does not work on the new computer

  Hello world!

  I bought the teacher edition and student of CS5 for Mac in November 2010. I bought a new Mac and put the software on my new computer. InDesign, Illustrator, bridge, and Acrobat will open it (and good work to the best of my knowledge). However, Photoshop gives me an error message and does not open:

  

  I have no idea how to solve this problem.

  In the near future, I want to upgrade CS5 to CS6. But for now, I wish I could use Photoshop I have. I looked in my Plans and products on my Adobe account and the product is. But it's not a download to re-download it. And honestly, I don't remember if I was a physical download or digital download when I initially put the software on my original Mac.

  Any ideas or suggestions on how to fix this?

  Thank you!

  PS - also, Dreamweaver, Fireworks, Flash Catalyst, and Flash are all in my Applications folder. But I think they're just there because I did a try before you buy CS5 Adobe. Would this be the case? When I try to open applications, a box will appear asking for a serial number or an option to start using these applications on an experimental basis. I tried to put my purchase of CS5 serial number just in case it was accurate, and he says that's not a correct serial number. And my research indicates that these applications are not part of the standard package CS5. Are they only in my Applications folder because I used them once on a trial period?

  First set ' Allow downloads of "to"Anywhere"CS5 are considered to be an application not signed because it was released before Mac Gatekeeper.

  By doing this, you can ensure that the installation of CS5 is not blocked.

  

  When CS5 is installed, the next step is to update Adobe Application Manager

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  When this is done, you can open Photoshop CS5 and run Help > updates to get all of the updates in.

  If there is a problem, let me know.

• Tecra A10 - how to change the RAM?

  Hello

  I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

  The RAM slots are located at the rear of the Machine or below the keyboard?

  Any help will be appreciated.

  Thank you.

  Hello

  Memory module compartment is placed at the bottom of the unit.
  You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

  AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

  Welcome them

• Qosmio F30 - How can I increase the RAM

  IM from the philippines and I've had this laptop PQF30-00X016AR...
  Where could I find a Toshiba Center appropriate for that.

  This is because the laptop Qosmio series and I want to expand the memory.
  So bad, but this kind of cell is not yet released in our market.

  How or where I could spend it?

  Hi mate

  The Qosmio F30 memory can be upgraded up to 4 GB of RAM.
  In this case you would need 2 x 2 GB DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM.
  Usually it s no matter what manufacturer of RAM is all the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules must be compatible
  But I prefer the Kingston modules I use a more long time and had good experience with it.

  The RAM slots are placed at the bottom of the unit. There is a component of slot secured with a screw. You will need to remove this screw in order to get access to the memory locations.

  PS: the detailed instruction how to upgrade the RAM modules can be found in the user manual. You can find the download page manual here:
  http://EU.computers.Toshiba-Europe.com-> support & download

• Satellite C50-B-12Z - to upgrade the RAM up to 8GB

  I have Satellite C50-B-12Z, and I want to improve his memory of 8 GB of ram. Crucial memory site says that with my laptop is recommended 8 GB ram 12800, but would be less expensive to put a barrette dimm 4 GB of ram, since my laptop already has 4 GB of ram?

  Is it possible to have the problem since the RAM dimm fault its Samsung and I want to install a memory of brand? (all other spec of ram are identical, frequency, voltage, etc.) ?

  Hello

  At first some basic on your laptop model info: you are right, it can be upgraded up to 8 GB of RAM. Your laptop has two RAM slots, and according to specification for laptop, there must be a 4 GB so strips you need to do is add the second module of 4 GB.
  It is always recommended to use two identical modules.
  Original 4 GB of RAM has part number PA5104U-1M4G, so I recommend get you the same.

  Problem is that your machine is not supported for upgrading RAM by user and access to the RAM slots is quite complicated. The whole bottom cover needs to be removed and it must be done by the authorized service provider.

  If you try to do it yourself you will lose the warranty.
  My advice to you is to contact the nearest Toshiba service provider and pick up some info on this.

• My iPhone purchased USA will work in the United Kingdom?

  I'm visiting the United States in a few weeks and I'm looking to buy an iPhone 7 so I'm here, right in saying that it is unlocked, it will work perfectly once I am back in the United Kingdom with my UK SIM card?

  Hello bigbigdan1000,

  Thank you for using communities of Apple Support.

  I understand your message you will buy an iPhone Unlocked 7 while in the United States and want to know if there is work, when you return to the United Kingdom. You will need to buy the T-Mobile or AT & T version of the iPhone in the United States, a GSM model, so he could work in the United Kingdom. Additionally, make sure that you buy the version without SIM card, you are free to use a SIM card from any carrier that provides service for iPhone.

  Country view with taken LTE networks supported

  Best regards

• An iPhone Unlocked verizon 7 will work with the T-Mobile network?

  I expect to buy an iPhone 7. I am currently using T-Mobile, but I'll probably use CDMA-based network when I spend my winter in China. Anyone know if an iPhone Unlocked verizon 7 will support the T-Mobile network? Thank you very much

  If you look at the following:

  http://www.Apple.com/iPhone/LTE/

  iPhone 7 seems to have 2 different CDMA models:

  model A1660 (CDMA) iPhone 7

  model A1661 (CDMA) iPhone 7 more

  and 2 different models of GSM:

  Model A1778 iPhone 7

  Model A1784 iPhone 7 more

  My guess is that the models of Verizon (CDMA) do not work on the T-Mobile GSM network. Data connection does not work at least LTE. Not sure about the voice. T-Mobile and AT & T models may support data LTE in both networks.

• Photos will work on the Mavericks?

  Photos will work on the Mavericks? I'm not eager to update both BONES of my wife and her photo app

  No, Photos is a part of Mac OS X and will be installed by OS X 10.10.3 or newer.  You can install pictures by installing an OS X version which includes the relevant system libraries.

  Your wife is now running the Mavericks? Or what system you are upgrading?  with the Mavericks, she would need iPhoto 9.5.1 if it has previously used iPhoto. This update is no longer available on the appStore.

• A HP Officejet H470wl will work with the MacBook Air

  A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

  Hello..

  New Mac come with v10.11.x El Capitan pre installed.

  I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

  Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

  Printer and scanner software available for download for your Mac

• Clicks of the mouse will not work on the browser - suggestions?

  Following an update of Firefox last year, I can't get the mouse clicks to work on the browser. Is not serious if he left or right buttons. Links and radio buttons get highlighted when you move the mouse over the links or buttons, but they do not work when you click on it. They work on other browsers (Explorer and Chrome) but is no longer on Firefox. I use it on a Sony Vaio laptop running Windows 7

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!