15 HP notebook PC 15-r004np: not found vice starting

Similar Questions

• BOOTMGR not found - cannot start Windows

  I have a similar problem...

  Start the computer and I get:-BOOTMGR not found... Press Ctrl + Alt + Del

  I put the Toshiba recovery disc in and it registered no operating system... I finally gave up and removed the completely hardrive and tried to install the backup disk... now I have a disk backup who thinks the computer is empty, a Toshiba Recovery disk which does list not all operating systems and asks me to install the drivers... which of course - I don't have an operating system disk that we are not given when we buy the computer...

  I have nothing more than a silly recovery disk which is not useful to the plastic that it is written on... and a computer which has nothing on the hard drive and no operating system to all the...

  I was thinking of buying another drive in Vista or maybe a new windows 7 one... but what guarrantee do I think it will work...? I could spend $ 500 for no results...

  I searched the internet for months looking for an answer, and everyone seems to mean the same thing... Operating the drive should be issued when the computer is purchased...

  Jaz

  Hi Jaz70,

  First of all, it would be interesting to know if another disc would work. Perhaps your CD/DVD drive doesn t work properly so she wouldn t read any type of disc.
  Check this box!

  In addition, you can try to clean the disc or let's say the lens using a microfibre cloth. Sometimes it works

  If you buy a Microsoft Windows disk it won't cost $500. ;)
  These discs are not so expensive.

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?

• GrooveNew.dll not found when starting Control Panel

  A few days ago, I noticed that I get an error message when I run the Control Panel application.  It is said

  "control.exe - Unable to locate component".

  This application has failed to start because GrooveNew.DLL is not found. Reinstalling the application may fix this problem. »

  After clicking on OK twice, the control panel starts and seems to work.

  Hello

  According to the error message it seems to be this GrooveNew.dll file has been deleted somehow. GrooveNew.dll is a file belonging to the Microsoft Office program.

  I suggest you to repair the Office program by following this link.

  Automatically repair Office programs

  http://Office.Microsoft.com/en-us/help/HP052372001033.aspx

  Or, you can also try to repair the program & features in Control Panel.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the message that backgrounndcontainer.dll is not found on start up

  After the start and go to the desktop, I get a notice, it says - there was a problem starting C:\Users\Jim\AppData\locale\conduit\BackgroundContainer\BackgroundContainer.dll. The module is not found, I have checked the Task Scheduler Library and didn't find all of the led elements. I downloaded Malwarebytes anti-malware program (which did find some elements of conduits and removed) and still get the notice. I use windows 8.  What I've read, it's because of a Conduit toolbar that installed on my computer when downloading a program. Anyone else has any suggestions to solve this problem?

  Success! I found this elsewhere on the Internet and I worked!

  To resolve this problem, download AutoRuns and save it to your desktop.

  • Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
  • Open the folder and double-click on autoruns.exe to run.
  • Vista/Windows 7/8 users right-click and select run as administrator.
  • Please be patient as it scans and fills the entries.
  • When you are finished scanning, it will say loan to the downstairs and the list of all entries on the all tab.
  • In the main menu, click file > find and type the name of the file (backgroundcontainer.dll) related to the error message, and then click Next.
  • Alternatively, you can scroll through the list and find any writing about backgroundcontainer.dll and them.
  • If found, right click on the entry, then select Remove.
  • Out Autoruns and restart your computer when it is done.

• No operating system not found of starting problems

  I understand that there are other threads covering this error message, however none with this particular set of circumstances.
  Reminder: My system came with an empty msata slot that I filled with a 240 gb intel 525. I did two great patricians, loading on Windows 7 and cloning the windows installation 8 factory to another. Bios supported configuration using inherited and put my ssd as the first drive in the boot order. and as if it was magical, I could duel boot 7 & 8.
  Question: when I pulled the factory 5400 RPM drive I haven't had the no OS found message. Representing a little less a perfect starting, I went into recovery and command prompt 'bootrec (FixMbr/FixBoot/RebuildBcd)' commands. All crossed very well and after the closure of the cmd prompt window that I was given the opportunity to stop and start Windows 7 ultimate to the recovery page. Convinced that he had worked I accepted this offer and was welcomed by no operating system found once again. Confused, I went back and did cmd invites new bootrec /ScanOs and again found two.

  What I forget?

  Thank you in advance for something useful.

  Please do not take into account. Incace anyone else have this problem, I had to use the BcdBoot commands to add files of Bcd for each partition on the disk msata.

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• There was a problem starting c:\PROGRA~3\kodak\easysharesetup\$Regis~1\registration_8.3.30.1.SXT Module specified was not found - error starting error message

  Original title: specified Module could not be found - error message

  I removed the Kodak Gallery program, but since then, at startup, I get an error message:

  There was a problem starting C:\PROGRA~3\Kodak\EasyShareSetUp\$REGIS~1\Registration_8.3.30.1.sxt

  The specified module could not be found.

  This only happens if my laptop is plugged - if I use it on battery, there no error message. Please can someone help?

  Try this program. It's good enough to get rid of leftover pieces of programs.

  http://www.revouninstaller.com/

  If this does not help, you can always watch this program for exactly what is running at startup and disable the offending application.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Create virtual XP machine. Not found when starting disk

  Hello

  I am trying to create a Windows XP virtual machine.

  Nothing special, hard disk 20 GB 512 MB memory, 1 processor. I am starting an ISO Image and tried to boot from a disk of XP Instalatiuon different windows.

  When I start the virtual machine from the ISO Image or disc, not normal inspect your configuration and then routine ends by saying that he can not find a hard drive to install to.

  I deleted and then recreated this virtual machine several times, always with the same result.

  This has never happened before and I don't know where to fix it.

  I tried to Bus and LSI Logic disk controller, I tried different LUN and ESX host. Still the same problem.

  We use ESX 3.02 and Vertual Center 2.02.

  Can anyone sugest where should I look to fix this problem.

  Concerning

  Kevan

  HI - you need SCSI for Windows XP driver.

  In the link below, it gives instructions on how to install a Windows XP client and where you can get the driver etc...

  http://virtrix.blogspot.com/2007/09/VMware-installing-Windows-XP-on-ESX.html

• Serial number not found

  Hi I have a

  HP Pavilion p6206uk desktop PC

  http://support.HP.com/us-en/document/c01866525

  Im trying to update my bios but cant seem to find anywhere, ive uninstalled all my computer hp, so hp applications, update my bios while I don't know seems pretty hard to do, where I can find

  It seems that my bios has lost its information, I phoned Hp to this subject and it is clear my computer needs to be retatood or something along those lines, my warranty is passed, I would have to pay £200 for repairs (rip off I know) they said that this could be down to change the material (I didn't touch anything inside my computer as im not very well with the physical aspect of computers, I am with the software however. After I saw the "serial number not found" message appear I started getting messages like "Please activate windows, you have 30 days remaining (something in the way) I tried to enter the product key on the side of the computer, but some of the principal to wear on what makes it difficult to read, so I tried a Tassel factory and hell broke loose. im getting the error messages that I can't use this factory-installed partition that sits on my hard drive.

  Please help, im not paying for the mistakes of hp is there anything I can do, or something there t & c that makes it this problem because they design motherboards to fail like that?

  Regaards

  Adam

  You have two machines with this error?

  http://h30434.www3.HP.com/T5/notebook-recovery/serial-number-not-found-and-copy-of-Windows-is-not-genuine/TD-p/2739335

• Firefox redirects to google when server not found

  If I do a typing error in the address bar (for example, instead of www ww), instead of getting a message saying that the site is not found, Firefox started to take me to a page of Google search for the URL I typed in.

  Also, if I click on a link in a web page and the server in the connection no longer exists, I should get a message saying that the server is not found, but I'm redirected to a google search for the domain name in the link. It's confusing.

  Firefox redirects to google when server not found [SOLVED]

  Previously published in thread https://support.mozilla.org/en-US/questions/925517 (now blocked to I can't update it with the solution - maybe someone can add this solution to that thread?)

  Firefox redirects to google when server not found

  If I do a typing error in the address bar (for example, instead of www ww), instead of getting a message saying that the site is not found, Firefox started to take me to a page of Google search for the URL I typed in.

  SOLUTION: This was caused by the http://www.easyfundraising.org.uk EasyFundRaising toolbar (which I think could rest on the Google toolbar?)

  After disabling this plugin, the problem disappeared. I have notified the EasyFundRaising to this issue.

  Brian

  Added to a thread locked by a forum moderator.
  Above is 931684/questions/931684 by bcraigie
  
  (I'll leave this locked, locked presumaly because it drew spam)

• Not found payment module: Get cannot start my application on the Simulator

  Hi guys,.

  My project successfully compiled the JDE 4.5.0. But I am after the error message when running the app on the Simulator:

  Starting MyApplication
  Searching installed codfiles for alias 'paymentapi'
  Searching uninstalled codfiles for alias 'paymentapi'
  Module 'paymentapi' not found.Error starting MyApplication: Module 'paymentapi' not found.
  

  I added some paymentapi.jar for my project. Project-> properties-> Build tab-> any Jar files.

  What's wrong?

  Please guys advice.

  Thank you.

  I found the solution. We need to compile the JAR file in a new project.

  Here's how:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Compi...

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• Hidden entry point causes the Page not found error

  Hello.
  
  I use Apex 4.1.0 on Oracle 10.2.0.5 and mod_plsql (Oracle application server).
  
  I created an application with two tabs.
  
  On one of the tabs in a block of Annonymous PL/SQL, I have the following code:
  

  begin
    htp.p('
  <!DOCTYPE html>
  <html>
  <head>
  <title>AMO PROPOSAL CHECKLIST</title>
  </head>
  <body>
  <h1>AMO PROPOSAL CHECKLIST</h1>
  <form action="" method="post">
  <input type="hidden" name="FS-1" value="1" />
  text2<label for="C12" class="hideMeButHearMe">text2</label><input type="text" name="f02" size="20" maxlength="12" value="" name="TEXT-Q12" id="C12" />
  My Question
  </form>
  </body>
  </html>
  ');
  end;

  When I run this page, the HTML code is rendered correctly.
  
  However, if I then click the other tab, I get the error: Page not found.
  
  I've narrowed the problem to the inscription of this point of entry hidden: < input type = "hidden" name = "FS-1" value = "1" / >
  
  If I simply delete this hidden, switch to another tab throws any error.
  
  I ran this page using Firefox with Firebug. But does not help me understand why this hidden item throws the error.
  
  Anyone know why this is happening?

  EEG wrote:
  Hi, fac586.

  Well, today the good folks at Oracle/Apex unlocked my account apex.oracle.com and so, was able to connect.

  I created a new application:

  Workspace: EEG
  Username:   [email protected]
  Password:   galaxy (Note: all lowercase)
  
  App Id: 28044 (Name = Debug Page Not Found Error)
  

  I created a new user of fac586 , so that you can follow what I've done through the activity if necessary log...

  The application uses the same theme (Sapphire, #17). Page 1 contains a region PLSQL Annonymous Block in which I simply preprogrammed the exact same HTML code that throws the error "Page not found" that started this post. The other page is just a page of report.

  When the application runs, page 1 immediately appears with the HTML code. However, by clicking on the 'Report' tab (for the 2nd page) get the Page not found error.

  If you have time, I'd appreciate it if you could kindly look at what I've done. It would help to understand if you can translate essentially advice you have already posted to what is shown in this sample application.

  After seeing what you do more in detail I am now actually suggesting a completely different approach ;-)...

  Given the potential duration visualized forms and the obvious importance of the applied CSS, preview style has really come in the form of a separate document. (As noted above, you can not have more than one element html, head and body in the page and that and the CSS that you attempt to register is completely destroying the presentation of the APEX on page 1.)

  Therefore, I want to say now is made the preview in a separate document in an iframe within an HTML region, as illustrated on page 3:

  Document source is a process on demand in your application from which you can call a procedure that returns the HTML survey form. The iframe is automatically sized to display the complete form.

  You still need to take measures for the visualized form either by ferry to sand/locked so that it can be made: it is the case in the examples the measure where there is no form action and no submit button, but it is unclear if this is indeed the case in your application?

• Pavilion Notebook 15-p204na: not found boot device

  I get the folowwing message:

  Not found boot device

  Please install an operating system on your hard drive

  hard drive (3F0)

  I did a restore default BIOS, but it did not work.

  @Ram14: see is something in the linked thread help: ' Hard Disk - BootDevice (3F0) not found "error - HP Support Forum's - 2443931