GrooveNew.dll not found when starting Control Panel

Similar Questions

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Create virtual XP machine. Not found when starting disk

  Hello

  I am trying to create a Windows XP virtual machine.

  Nothing special, hard disk 20 GB 512 MB memory, 1 processor. I am starting an ISO Image and tried to boot from a disk of XP Instalatiuon different windows.

  When I start the virtual machine from the ISO Image or disc, not normal inspect your configuration and then routine ends by saying that he can not find a hard drive to install to.

  I deleted and then recreated this virtual machine several times, always with the same result.

  This has never happened before and I don't know where to fix it.

  I tried to Bus and LSI Logic disk controller, I tried different LUN and ESX host. Still the same problem.

  We use ESX 3.02 and Vertual Center 2.02.

  Can anyone sugest where should I look to fix this problem.

  Concerning

  Kevan

  HI - you need SCSI for Windows XP driver.

  In the link below, it gives instructions on how to install a Windows XP client and where you can get the driver etc...

  http://virtrix.blogspot.com/2007/09/VMware-installing-Windows-XP-on-ESX.html

• OpenGL, GLUT, used to work on XP, is "glut32.dll' not found on Vista 64

  Newbie Registration date: 27/12/09 Messages: 1

  I had a small program in OpenGL, GLUT (gl.h, glut.h) which worked well on my Windows XP machine in Visual C++ Express. Copied on my laptop Vista 64 and now compile OK (after I correct specify include folder and folder lib for glut.h and glut.lib) but I get a "glut32.dll' not found when I try to run it. Y at - it a good website or a tutorial that explains how to get OpenGL/GLUT running under Vista 64. What should I download etc... ??? Someone at - it example code OpenGL/GLUT that works for them on Vista / VC ++ Express? What makes you specify in VC ++ and what files should be in folders?

  Hey Drichird,.

  I had this same problem with my laptop and I found only on 64-bit computers, the folder as VC ++ resembles the title of the dll is actually C:\Windows\SysWOW64 instead of C:\Windows\System32. If you move glut32.dll here you should be good to go, or at least I was. I hope this helps!

  Oh yes and if you need to download the files of glut bring here: http://www.xmission.com/~nate/glut.html

  Matthew

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• When I start it says SysMenu.dll not found or sometimes worn cant or something

  Original title: Windows 7 rundll HELP problem

  When I start it, it says

  SysMenu.dll not found or sometimes cant scope or something

  I have windows 7 acer laptop

  Hi Rico,

  Thanks for posting your query in Microsoft Community.

  From my research, I found that this is a useless file and it can be removed by following the suggestions posted by v-6jot-cat on November 10, 2013.

  Please be careful when you delete the files. If you delete the wrong file, which can cause startup issues.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/systemsysmenudll-the-specified-module-could-not-be/809f79e3-DB5E-455b-aebb-4c0f66a8babc

  Note: Suggestions in this post are also applicable to Windows 7.

  Hope that the information provided is useful. Do not respond if you need more help.

• How to run a dll not found program it keeps generating start dll

  How to run a dll not found program it keeps generating start dll

  * original title - network programs network networking Internet Web site Site Web Web Site URL *.

  Hello

  1. What is the operating system installed on your computer?

  2. what program you're talking about?

  3. What is the exact error message you are getting?

  4. when exactly you get this error message?

  5. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  In the meantime, I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

  I got a message when I reboot my pc
  «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
  I need someone to help solve this problem.

  Let's see...

  I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

  The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

  I think I want to reinstall Firefox, but this isn't the Firefox forum.

• Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

  Original title: AppleSyncNotifier.exe and RUNDLL

  When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

  RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

  How can I fix them?

  Hi saintaugie,

  1. have you installed any Apple Sync program on the computer?

  We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
  a. to see How to change or remove a program in Windows XP
  b. in the list select MobileMe and uninstall it.
  c. restart the computer once the program is uninstalled.

  We found the same problem on the Apple Forums.
  See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error
  

  Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The application has failed to start because Qtcore4.dll not found. So Daemonprocess.exe has a stop

  I use a vista laptop (32-bit OS) window when I log in, these messages, "the application has failed to start because Qtcore4.dll not found."  And so Daemonprocess.exe has a stop. Hope u could help me solve this problem. Thank you.

  Gary Goh

  Goh Hey! I had the same problem.  It is caused by moboengine software.  This has happened with me after you have uninstalled it.

  Navigate to C:\program files (x 86) \moboengine and remove this directory, make sure that you have killed the daemonprocess.exe execution program in your first task manager ;)

• Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

  Original title: windows cannot find c:\windows\system32\control.exe

  Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

  Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• BHO. DLL not found. Could not start the IE3SH application

  Recently when I start my computer I get 2 messages. The first says BHO. DLL not found and redownload and the other is IE3SH application cannot open. I'm not sure what one of those is or how they work on my computer but she likes to solve this problem. Any suggestions?

  http://download.CNET.com/CCleaner/

  Try to clean your system with the above.

  And do a scan of Malware:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• Startup error: "this application has failed to start because google desktop common.dll not found."

  Original title: google desktop common.dll

  When I turn on my computer is the first thing that lights up, this application has failed to start because google desktop common.dll not found. Re-installing the application may fix the problem. How to fix this problem? What do you do? or you re-install.

  This error message means that a Google application that requires the file 'google desktop common.dll' could not start because the file is missing. The first step to solve the problem is to identify the application that is using this file. Do you use Google software (ie: Google Chrome, Google Sidebar, etc.)? If Yes, what are the software you use?

  We will work from there,

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.