16.0.2 address bar will not go to the address - new installation, no add-on at all. -perfectly vanilla

Similar Questions

• Light bar will not move from the Park position when the cover flat is in place.

  I need to copy a piece of a book of music, mark it for repetition.  The book is thick enough that I must leave the cover upward.  The first 6 copied pages OK, but now all I get is a page of alll-gray.  The light bar doesn't move; It sounds like it is stuck, but only when the cover is in place.  The cover down (copy of one sheet), it works fine.

  I thought about it!  The diference between copies who worked and those who did not was the size of the paper that I used to hide the unwanted materials.  For those who worked, the sheet lying on the light bar.

  Apparently the light bar requires a white surface facing the flat, or it won't work.

• R3000 Presario will not boot from the cd after installation of windows 7

  Hello

  I have an old Presario R3000, someone updated to windows 7, has a few problems, including the cd player read don't not bootable disc, because I would like to install Vista instead, any suggestions on how to solve this problem, thanks in advance.

  chefey aka David

  Hi Futoji

  Portable office, dismissed plugged DVD and voila, it worked. I have an installation disc Windows 7 Starter and installed as I thought it would be better for! GB of memory, was not bothered with it runs, so Vista, installed fine. Some drivers are missing, sound and player card, as it's XP, so no drivers HP, I have a fixed front sound, means add files in a folder of the directory, will have to google search it again once, thank you very much for your advice, which fixed the problem, I am not too bad for a surfer of money. I know the numbers of the missing drivers, it's just a case of locaing, some of the download sites are very confused. Once agai thanks.

  David

• The wheel on my mouse will not scroll from the current software update. It works on all other programs on my PC. Help, please!

  I use Firefox with Windows XP and a Lenovo ThinkPad and Lenovo optical wireless mouse. Some websites do not allow me to scroll or click on the links

  I was in my version of FireFox from current to version 3.6.25 and that fixed it. I never pass!

• Brand new OfficeJet 7000 drivers will not install for the brand new Windows 7 Ultimate 64 bit PC

  Hello

  I downloaded the versions Basic, both full of drivers for printer OfficeJet 7000.  Move cleanly - error code 2203.  When talking about this issue with the Support technical they tried several different things, but nothing has worked.  I have a service ticket number - 80356333671

  After turning off the phone (more than 90 minutes) - I searched on google and all the hits that were displayed were the same steps I saw technician employment, made you ask - is google, the new standard Tech support?

  Currently, I own a nice weight and pretty paper.  Anyone can help - I'd appreciate it.

  With the help of technical support, I ran the "Officejet software and driver Removal Utility" for my particular model (available on HP website - driver download page) and then ran the installation of the driver and it worked perfectly.  Why? I do not know.

• Software Adobe will not open after the download and installation with a cloud of adobe creative

  So I installed a PC brand new, everything works well in addition to Adobe.

  Install the creative cloud works very well, and then download and install the applications of software like Photoshop, After effects, first etc...

  But when I try to open these programs it just does nothing. Nothing appears and I can't find any process in Windows Task Manager.

  I need to get this working ASAP, I had a few projects to complete.

  Would be very happy if someone could help me

  (Edit, I uninstalled all adobe software and reinstalled, but which does not either )

  Data sheet:

  

  Fixed, when I tried to install photoshop cs6 instead of cc, I got a popup that I have lack of liscenses.

  I totally forgot to turn off my old PC

• My menu bar will not appear.

  I just logged on my mac and the menu bar will not be broadcast. I can't find the settings for it. I tried to close, and yet, it will not show. The only way I see it is if I move my mouse to the top of my screen.

  Open System Preferences > General

  Deselect it: automatically hide / show the menu bar

• CRNT FF: 1 of 5 emails lost all my messages on viewing but shows the amount of mails are there. Search can find them all, just will not appear in the Inbox

  1 of 5 email ACCOUNTS receive mail OK, but as soon as you leave this account and that you come back, nothing appears in the Inbox. The status bar shows however, that there are 32 emails it even if the Inbox is devoid of any text.

    Using Search, I can find ALL 32 emails by searching for a word in the subject field or the body fields. The mails ARE there!  They just do not display in the Inbox.
  

  Then... How the hell can I get the Inbox to display its content again?

  It worked until the day before yesterday when I read an e-mail from a reliable source and it automatically disappeared, along with all others in the Inbox. All other accounts are working very well.

     I tried creating a new email account but it wouldn't let me, giving me an error that the "incoming already exists".  No number or anything; it come when I click DONE in the creation process.  The new account will not write to the disk.
  

  I ran NOrton, AVG, MalWare Bytes, Windows Defender, Spybot AV and the other that I forgot the name of that time. ALL showed nothing found after each live scan success. I'm reasonable sure, I have no malicious software.

  Emails from this account are quite important, and I don't want to lose them if possible; they are for a Committee planning the 50th high-school reunion.

  Windows 7 HP, Dell XPS L702, 6 Gig of RAM, Intel i7 processor and lots of disk space. I've also compacted without change. The messages are all still there, but nothing shows in my Inbox; It is empty. I only see them using Find Messages from words I know are in them.

    Happy to provide any other info needed to evaluate this.  Oh, the account Sends OK too; it's a POP3 account setup.
  

  Any help would be most appreciated!

  Twayne'

  In main menu, make sure that you have seen (Alt - V) - topics - all.

• I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  Question
  I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  I'm happy to have helped.

  It was something that many users asked when he changed first, and I initially did not know myself that the order of the buttons would make a difference as to if a button or a pair of buttons would be displayed.

  If you mark the post as solved while he is recorded in the answer will appear in the results of research and may help others.

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Windows live mail will not play a sound when new mail arrives

  Windows live mail will not play a sound when the mail comes and will not report in the task bar. I 'play a sound when niew messages come' checked in the options. What could be wrong?

  Hello

  The question you have posted is related to Windows Live mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=15