16 GB Cruzer Glide is now allowing only 1 GB of storage

Similar Questions

• 64 GB Cruzer Glide needs formatted - reformatted only to 1 GB

  We used our two 64 gb Cruzer flash slides to back up our DVR before he died, and they DVR then reformatted to any file system is necessary.

  After we had put the files on our new DVR, I went to reformat two readers flash for Windows to use.

  We run Windows 7 with Service Pack 1, currently updated.

  When I choose to format, the ONLY available size is 1 GB, no other options for the size.  FAT is the default file system, but put in anything else still does only 1 GB.

  I searched the forums without success for a similar problem.  I don't see any drivers for flash drives, but I will keep looking until new ideas pop up here.

  Thanks for reading

  Found the solution a few pages in...

  HP USB Disk Storage Format Tool

• Help to use Cruzer Glide 64 GB to transfer the Itunes folder?

  Can anyone help please?

  I bought a SanDisk Cruzer Glide only to transfer my itunes folder everything old PC of Windows XP to a new Windows Vista pc.  My itunes folder size is 47GB, Cruzer Glide is 64 GB

  Given estimated duration varied between 24 to 30 hours. Whenever I tried to copy the itunes on the flash drive folder it stopped working after about 20hours (!)

  Whenever he can't I deleted all the files he had copied successfully before re - try, as I had no idea of what what is wise because it's all encrypted.

  Okay, so I decided now, I would use CruzerGlide without my files being encrypted, because I need the security and maybe this will decrease the time it takes to do what I'm trying to do. I didn't know how to install without this option to access secure flash drive.

  Please can someone tell me how always use it only as a basic memory stick?

  +

  This will solve the problem I have?

  MANY thanks in advance

  Yes, do not use SecureAccess for this task will reduce considerably the time of transfer.

  The easiest way would be when you plug the gliding flight and SecureAccess begins SecureAccess farm.  Then access the drive using Windows Explorer.

  If you want to disable permanently SecureAccess using Windows Explorer, delete the two files/folders on the gliding flight.

  Another consideration, if your files, not your file, are larger than 4 GB, you will need to reformat the drive in NTFS or exFAT.

• Cruzer Glide to the 128GB - 32 GB formats

  I recently bought this 128 GB Cruzer Glide.  Stupidly I formatted like a stick of memory recovery for my laptop, and it appeared to have 32 GB, none of them usable for anything other than recovery.  So I formatted it and now it is 32GB.  How I - what I can? -return to 128GB?

  Google HP Disk storage format tool of research. Download and use to format the USB. It should restore the full capacity.

• Special RV220W NAT allows only a single service?

  Hello

  Just bought a RV220W for a client to replace a WRVS4400N which has no support for individual NAT and stated that the specific NAT for this router is only marginally better.

  I have three WAN addresses and three devices to their card. With the RV0xx, I used the following more than a dozen times.

  WAN 1 address - public address of the router

  Port HTTP, HTTPS and SMTP for Windows Small Business Server 2011

  Messaging and remote Web access are available to the remote.company.com

  Address WAN 2

  One-to-one NAT to Ubuntu Server's private IP address

  Add the following access rules:

  • All refuse
  • Allow everything to the private IP address of the HTTP Server
  • Allow SSH to static IP address of my business to private IP
  • Allow FTP to static IP address of my business to the private IP address

  Companies Web site is accessible to company.com and I can update the site with SSH and FTP

  Address WAN 3

  One-to-one NAT to private IP address of the module of RMM Intel Server Hyper-V (Lights out remote management)

  Add the following access rules:

  • All refuse
  • Allow HTTP, HTTPS, and RMM all ports of statics of my business to the private IP address of RMM modules

  I can access the my business network connection rmm.company.com server

  My problems are:

  1. Specific option NAT requires now allows you to specify the service you want to transfer (Note: service, not services)
  2. If you select all of the service which is the only way that I can see for having more than one service, there is no way to add any specific Allow or Deny rules because the Destination area is dimmed in page access rules.
  3. This results in my Ubuntu Server only have HTTP sent to her and my module RMM having all ports open to any IP address.

  There must be a way around this! I don't understand why the Destination IP option is grayed out for all inbound access rules. I used this same configuration with the RV0xx of Cisco, many Sonicwall, as well as several Cisco ASA firewalls. Obviously this isn't an ASA, but this individual NAT implementation is useless!

  Any help is greatly appreciated. Thank you

  Kevin

  Due to the GUI limiting to one service in individual NAT page, users must go to the firewall > page access rules to specify additional services are allowed.

• ACL to allow only FTP - various issues

  Asked me to develop a way to connect a server of the company not to one of my closet of 5509 running several VLANS over a couple of floors on my building. The 5509 has no RSM and is connected to the big 3 layer switch... 6509.

  I was told that I have to do the "secure" connection This server will make file xfer (probably ftp)

  Even if we have a firewall... the decision was taken to put the server in own vlan... say vlan 201 and hard give it an ip address of 10.4.201.11

  I learned to develop an ACL that will allow only ftp traffic.

  Here's my plan

  create a vlan 201 on the 6500 and 5509 and assign a 5509 port to it for the server

  I think the application the following ACL to my interface vlan 201 on the 6509.

  access-list 100 permit tcp 10.4.201.11 0.0.0.0 no matter what 20 eq

  access-list 100 permit tcp 10.4.201.11 0.0.0.0 no matter what eq 21

  access-list 100 deny ip any one

  On the 6509 applying the ACL

  IP access-group 100 to

  I have a few questions

  1. If I have the ports 20 and 21 licence cover me for ftp traffic?

  2. by encoding 0.0.0.0 in the acl that forces ip address of 10.4.201.11 to match or through it now?

  3. as far as I know deny it a whole will kill anything else

  4. I am concerned by a couple of other things... I don't know that thanks should be sent back as appropriate. I also wonder if I also need to apply leaving and entering?

  5. What saddens me really, it's that I have never done an ACL before and do not want to create a situation where I block the other traffic on the 2 switches... I guess that's the advantage to do it in one vlan separate... then I hope that if something "unexpected" happens when we applied it... it would only affect that the vlan 201.

  6: last question, if we had to go back for some reason any acl... I hear that they are difficult to change once in the config... A procedure to follow to get rid of the ip access-group 100 in 1st then remove... the fact second access list statements the other way would leave only the list still in the group.

  Thanks in advance for any helpful suggestions

  Hi Lane,

  Here are a few answers (in the same order as your questions)

  1. the answer is: it depends. FTP can operate in one of two modes: active and passive. Depending on the mode, the required ports are different. The following URL has a good explanation of the difference between the two;

  http://SlackSite.com/other/FTP.html

  As the server is under your control, I think that using Active FTP should be fine. Therefore, the two server ports you need to open are tcp/21 and tcp/20.

  2. a mask of 0.0.0.0 makes the access list on every bit of the network address that is specified. So what you've got is fine.

  3. access lists have all implicit "deny all" at the end of their kind that last statement is not really necessary, but it might be good to let in readability.

  4. because you want to make sure, a combination of inbound and outbound filtering is in order.

  5. what you do on this VLAN will affect that VLAN and that only one VLAN - you don't have to worry about an impact on anything else.

  6. it's okay. Remove the statement of 'ip access-group' under the interface before doing anything to the access list real himself.

  Here's how to set up the ACL:

  access-list 101 permit tcp any gt 1023 host 10.4.201.11 eq 20

  access-list 101 permit tcp any gt 1023 host 10.4.201.11 eq 21

  access-list 101 deny an entire

  !

  access list 102 permit tcp host 10.4.201.11 eq 20 all gt 1023

  access list 102 permit tcp host 10.4.201.11 eq 21 all gt 1023

  access-list 102 refuse a whole

  !

  interface vlan201

  IP access-group 102 to

  IP access-group 101 out

  Now, the above lists will be only to let the FTP server and not much else. Your server should use the DNS for some reason any? If so, you will need to drill holes in the ACL above to allow UDP/53 through.

  Hope that help - rate pls post if it does.

  Paresh

• VPN provider that allows only public IP addresses

  I need to establish a VPN to a seller who will only allow the public IP address through a VPN.  I need to keep the public IP address of my local network for the safety of political reasons.  I use an ASA 5510 with 8.2 (1) which is connected to a port DMZ on my router 3845.  My main firewall is configured on this router 3845.  ASA firewall does not have its own outside sepereate internet connection a 3845 router/firewall.

  This questions is connect the server of the provider (public IP) to my internal server (IP address of RCF - 1918) without having to put to rout the public IP address on my local network. Now, my only solution is to try a double NAT on the router DMZ and ASA at the moment.

  Ideas?

  OK, then you need to configure static NAT.

  You already have a static NAT configured for your internal server?

  If this isn't the case, then simply create static NAT with ACL as follows:

  static-server host ip access list permit

  public static static-server of access (inside, outside) list

  For the crypto ACL:

  Crypto-acl access-list allowed host ip

• OES-000149: allow only https connections, received http

  Hello

  I try to install the service of commissioning for my short system.
  I installed all three servers (server short, Integrator and Studio) in development mode and I did not use SSL in any of them.
  Now when I try to install service commissioning, I am not able to connect to the server short, the error is:
  "

  # < 29 October 2014 12:45:50 IST > < error > < com.oracle.endeca.pdi.logging.ProvisioningLogger > < infva05628 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< b07a8e9881d7066d:40aa6725:1495ac057b0: - 8000-0000000000000014 > < 1414566950356 > < BEA-000000 > < javax.xml.ws.WebServiceException: can't access the WSDL to: http://localhost:9001 / short-server/ws/manage? wsdl . It failed with:

  Answer: 404: not found ' URL: ' http://localhost:9001 / short-server/ws/manage? wsdl '.

  com.oracle.endeca.pdi.mdex.clustermanage.ClusterManageClientException: javax.xml.ws.WebServiceException: can't access the WSDL to: http://localhost:9001 / short-server/ws/manage? wsdl . It failed with:

  Answer: 404: not found ' URL: ' http://localhost:9001 / short-server/ws/manage? wsdl '.

  When I tried to access the url "http://localhost:9001 / short-server/ws/manage?" WSDL"I received the following message:"

  OES-000149: allow only https connections, received http

  
  

  How can I resolve this problem and install the commissioning service?
  

  Check your EndecaServer.properties to:

  Short require https = false

  Short-set-mode = false

• Export of collections to the external file allows only export as a jpeg image and not the original file types?

  Export of collections to the external file allows only export as a jpeg image and not the original file types?

  Why is this?

  DOOH-just found out why. the video bar was enabled prevail so on options-now them it works thank you for your answers.

  George

• I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

  I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

  It depends on what Mac model you have and is not possible for all models. Go to the website of OWC or Crucial and check.

  (141711)

• My version of Firefox is 7.0.1. My bank allows only version 3.6. How do I adapt so I can do my banking online?

  My version of Firefox is 7.0.1. My bank allows only version 3.6. How do I adapt so I can do my banking online? I use a Mac.

  You could install version 3.6 next to your current version. Just download the current language of http://www.mozilla.org/en-US/firefox/all-older.html and then in the Setup program, change the installation location. You can just change the last part of the installation location (where it says Mozilla Firefox) for Mozilla Firefox2

• display a page when half of the screen went black then now can only read half

  My screen now has only half the viewing area. Some of the icons have moved across the screen too. Half of the page is now dark with just the icons indicating at the bottom. What I can do to get back to a normal full page please.

  [Moved from comments]

  Hi Emily,

  Thanks for posting this question in the Microsoft Community Forums.

  I see that the computer screen only appears on half of the screen and the other half is black.

   

  Let us work together to solve this problem.

  However, we need more information on this issue. Please answer the following questions.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. when exactly this question produce?

  4. don't you make changes to the computer before this problem?

  Please answer the questions so that we can better understand the issue.

• mx459 won't let me enter the WEP key number, allows only symbols and letters. How to enter numbers?

  mx459 won't let me enter the WEP key number, allows only symbols or letters. How to enter numbers?

  John

  This might help

  Press the SETUP button on the control panel of your printer.
  Using the arrows, select DEVICE SETTINGS, press OK.
  Select local network SETTINGS, then press OK.
  Select Configuration LAN wireless, and then press OK.
  If a message appears, press the WPS button, press STOP to cancel.
  Select STANDARD INSTALLATION in the next screen that appears, and then press OK.
  Select your access point or router, and then press OK.
  Press OK to confirm the access point name.
  Enter your password using the numeric keypad on the right.
  On the screen where you enter your password at the top right of the LCD screen, you should see a: 1. This indicates you are in digital input mode. If you press the asterisk (*) will be fixed: has or uppercase mode, pressing asterisk with tiny switch. To enter a letter in letter mode, you press the digital key to scroll through the available letters. For example: to enter a letter 'c', you press the '2' three times.
  Press OK when finished.
  The LCD will say "Connected", if the password is correct.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• How to allow only .gov Web sites on Windows XP using the installation of the broad-band

  How to allow websites .gov only on Windows XP. Use BSNL broadband. Made of internet sharing in LAN.

  Concerning

  Maton

  Hi Matt,

  This forum is for MSE who cannot restrict access of Web site you want.

  One of the possible methods that comes to mind uses the Parental http://www.windows-help-central.com/parental-controls-in-windows-xp.html may control with Windows Live Family Safety http://explore.live.com/windows-live-family-safety?os=other (according to the version of XP and whether or not you have a workgroup or domain LAN).  When you set up, allow *.gov, but reject all other types you can imagine (I don't think there is a way to allow only .gov, but you can exclude most if not all of the other busiest - check domain name registrars to get a list of options).  If you use a domain, way to go would be with a custom domain group policy to restrict access on all of the network (except perhaps the server or individuals of special category in Active Directory if you want).

  If that is not the case, and I think it might, please repost your question in the following forum to get the expert assistance you need: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking?page=1&tab=all.

  I hope this helps.

  Good luck!