M177 LaserJet MFP Pro: Printer screen locked up

Similar Questions

• M127fn LaserJet MFP Pro: Printer/Fax stuck on 'Printing Fax page 1'

  My business fax machine is stuck on a screen that says "Printing Fax Page 1". I tried to unplug it for 5 full minutes and it does not clear. How can I reset the printer/fax?

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  Please take a moment to read the privacy policy of HP to http://www8.hp.com/us/en/privacy/ww-privacy.html this privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online business is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

• LaserJet pro MFP: HP laserjet MFP pro printer does not print color

  My new printer copy color scans in color, but prints gray... Although the print settings are color; (help!

  LaserJet printers have a built-in web server.

  You didn't actually tell me the model of the printer have spoken, but most LaserJet printers have a network of Port where you can plug in Ethernet cable.

  Printers have an IP address that identifies the network.

  You put the IP address in the location bar of a browser, and click on enter it will have four numbers with dots between them.

  Pointing the browser to the IP address of the printer and then you should see the built-in web server.

• M277 LaserJet MFP Pro: Printer 10 Windows just stopped working

  My printer worked for at least a month after the upgrade to Windows 10, and then it stopped working.

  Initially, I didn't find any game by default, and the ability to set it wouldn't work.  I tried to run the software install, V14309, but the installer just turn and quit, finally tells me to restart.  I did, the default value of the printer was there, I could change the default, but it wouldn't print and finally gave me a protection fault errors, telling me that the printer was not installed on this computer and restart my computer.

  Help!

  An update:

  After several reboots, the software uninstalled the software installation and after a reboot, I then reinstalled it.  He printed a copy of test, but when I checked on the printer to set preferences, it wrong agin similarly and told me not to have any software installed!

  A final update, I think:

  When I reinstalled the software I notice 2 printers: the original and a (1 copy) and the installation had set the default version (copy 1).  I tried to use the original and is the one who has failed and exploded with the error 0x1f622f2b.

  I then tried (copy 1) and guess what: what WORKED ON!

  Why is it so I have no idea.

  I spent a very unproductive hour, trying to get the help of telephone support HP in India.

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• where to get the hp laserjet 6l pro printer driver for windows 7 32 bit

  where to get the hp laserjet 6l pro printer driver for windows 7 32 bit.

  or if not is there a generic driver that will work for hp laserjet 6l pro printer in a 32-bit windows system 7.

  My Windows 7 Professional 64-bit system has a built-in driver (provided by Microsoft) for HP LaserJet 6 L printer; I guess that the 32-bit edition may also provide a driver.

  Note that the driver can only appeared after the list of drivers in the Add Printer dialog has been updated by clicking the Windows Update button in this dialogue and in the meantime (maybe several minutes) for drivers to download and list to be filled again.

• HP LaserJet MFP M-125 Pro has: MacBook Air connected to a Laserjet MFP Pro but does not print

  Hi, I'm trying to print from an HP LaserJet Pro MFP M - 125 bis, which is connected to a MacBook Air via a USB cable. The software has been downloaded and the print job is always show that if it is trying to print the given print job but no print is issued and the print job is considered fact. Can you please tell me what is wrong why the print outs coming out?

  Hi @Lilium,

  I see you are having problems printing via the USB connection. I would really like to be able to help solve this problem.

  Did you download and install the software solution full or run Upates Apple?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (LaserJet MFP M125a Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  How is the name of the printer listed?

  If the problem persists, try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you need help, let me know.

  Have a great day!
  Thank you.

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• HP LaserJet MFP Pro M127fw Installer has stopped working

  Have difficulty installing drivers HP LaserJet MFP M127fw Pro portable 32-bit hp with windows 7

  Build in software printer stops at Midway

  Downloaded software stops at Midway

  Printer driver standard windows 7 works very well and can print with it, but has no scanner driver

  Doctor scanner HP printer indicates the scan software is not installed and directing me to download driver on the hp website

  installation of this software also stops at Midway

  No errorcodes anywhere, box Installer just message could not continue and try to find a solution. This box diapears as well.

  Installation fails on cable network and usb

  no error messages in the logs of windows

  The http connection works fine

  tried installing with smart installation on and outside (is disabled for the moment)

  Spooler service works well

  We searched this forum more people seem to have this problem but there is no solution mentioned in the end.

  Help, please

  @Gemini02

  Thank you for your help.

  I'm afraid it does not either, I don't use McAfee but Avast.

  Stop Avast, or stop the firewall (windows standard) does not resolve the inability to run the installation software.

  If I unplug the USB cable, the virtual CD in the printer disappears and so cannot run uninstall.

  I didn't want to stop all services, because I don't know what he must stop and don't want other problems that may be difficult for me to correct after a reboot.

  Also, I didn't want to install as administrator, I cannot guess.

  My solution that worked in the end is:

  Connected the USB cable.

  A printer icon appears but with red crosses indicating missing and software scanner fax.

  Right-click on this icon of the USB printer and select software update. the research on the internet.

  Downloaded and installed the correct software without problems.

  I cannot now use the scanner software using the network (wired), but I can live with that.

  The printer works fine on the network. Scanner only via USB.

  Again, thank you for your help.

  This band of turnover can be now closed.

• LaserJet m225dn mfp pro: printer freezes up, power cord wrong or bad grounding?

  Hello.  We have an ongoing problem with this gel printer (backlight on).  I can say that it's okay if it passes in the standby mode.  If after the default, sleep, standby fails, it is always locked and requires a reboot.

  It comes with the power supply cord is too short, and relocation is very difficult.  I have been using two (seem to be very good) of the longer computer power cords.  One is 10' and the other is 12'.

  I tested the ground taken with a multimeter and it revient.2 v, which is not 0, but I think is pretty close.  There are other things on the same circuit.

  Problem is I can not test the normal short cord and easily keep the printer connected to the USB cord and a fax machine.  Would be a 10 or 12' power cord (no UPS online) will be enough to lock up this printer?   Thank you.

  I found the solution myself.  For a longer length, 14-gauge is necessary.  I have this and it seems to fix the problem.  He could have a blockage, but I'm not sure.  Been working normally for more than a week with this 15' cord

  Cable SF, universal 15 foot cord 14 AWG - IEC320 C13 to NEMA 5 - 15 p SJT 15 has

• LaserJet M127fn MFP Pro: Printer not connected

  Hi all trying in vain to connect the printer to a wireless router. USB connection to the router; router, Asus DSL N55U; configuration of the router page lists the active printer. That's all. Printer shows on self-esteem / Test as "unrelated", no IP address. What can I do to connect? Thank you very much for your time.

  I have this issue sorted by myself earlier today. Here's what I did. I have reset the printer by cutting the power supply and leave it unplugged for a few minutes. I've deleted all the software my laptop prnter installled. As opposed to the connection via USB, I connected through the ethernet on the printer port to one of the four ethernet ports on my router. Then I powered and immediately noticed a light on the router indicated connection through one of the ethernet ports. My wife came running downstairs to tell me that she could see the printer listed on his iPhone. After a few minutes, I ran a report of connectivity, and it showed connection and TCP/IP connection details. I then installed the software. I am happy to say that he works all famous and we are happy campers.

  Thanks for your help.

• Printer HP laserjet MFP Pro M127fn & 125: we have a big problem with this printer

  We have 20 printers or more M125fn and M127fn, we have problem with printing on the fonts Geo_Times, Geo_Times "BOLD", Geo_Times Italic, Bold Italic Geo_Times, we have programs that work on this policy and no one can print the text on this subject, please help us with this problem.

  Hello

  What program you are trying to print from?

  Printers use language to print Cffp, it will help to know the program to make sure that it does not require a more advanced PCL 6 printer

• HP laserJet MFP Pro M225DW printer: printer HP laserjet MFP M225DW not install on windows Xp sp2

  During the installation phase, I get a fatal error:

  A fatal error occurred prevents use of the product.

  Click 'Cancel' to cancel the installation.

  No reason. No work around. Reset did not work. Download the basic driver came with the same error.

  But installed on Win 7, 8 succeed.

  Help, please.

  

  Hello

  Printing software requires Service Pack 3, you can find system requirements below:

  System requirements: Windows XP (32-bit) Service Pack 3http://support.hp.com/us-en/document/c04328137
  

  You can follow these steps to upgrade your operating system, it is necessary to install the HP software for your printer:

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Kind regards

  Shlomi

• LaserJet M125nw MFP Pro: Printer refuses to print the text Document

  Cannot print text in any application on two computers (Windows 7 X 64). (According to request) error messages appear, or at all, nothing happens. Print images, but if the text added to the page (such as WordPad) and then nothing. Print test pages OK and all diagnoses are clean. OK WiFi connection. Suspect Windows problem, but nothing obvious. Have reloaded full pack of HP software.

  Hi turkeytrots.

  I checked the page drivers and it lists all the Windows 2000 drivers. Since you can now print the PDF from Adobe documents, most likely it is a problem with the settings for Word or account on the computer.

  Try the following steps to see if it will be useful.

  Go to start, Control Panel, user accounts, change user account control settings.

  Then drag the slider to the bottom never notify, and then restart your computer.

  What version of Word are you using?

  I have provided a URL on the questions to printing in Word, if the problem persists. How to troubleshoot printing problems in Word.

  Impatience back on your part.

• HP LaserJet M125nw MFP pro: printer HP LaserJet MFP M125nw pro - analysis not through phones android cell phones

  
  
  The current version of the firmware is 20150228