2.17 MW still has bug level code

Similar Questions

• Rom1.2.1 calendar still has Bug - "this event don't exist anymore." (only for repeat well events)

  Upgrading to 1.2.1 solved many problems on my pre, including one-way sync with Google Calendar.

  But there is still a bug.

   

  Whenever I hit a recurring weekly or monthly event on the Meadow, a message bounces upward "this event no longer exists."

  Everything else is fine. For example, I can add new weekly/monthly events on Google or pre and they sync very well. Also, I can edit events at Google at will. Events not repeated works very well in all aspects, etc.

  Ok. I think I identified earlier bug, after many tests of course...

  Repeated events to meet with this bug ONLY when they are repeated forever, in a Word, if you set "until what MM DD YYYY", it will be ok.

  I had changed all the events repeated on my calendars, set repeat until 1 January 2015. Then, after a sync, all are accessible on the meadow.

  It is not correct to say that the only daily/weekly/monthly events have problems. Now, it may not be clear that the only problem is webOS does not handle the Google Calendar calendar for always repeated events.

  Hope this is useful and you guys at Palm can try and solve (this is still a bug, is it?) in the next update soon. Thank you very much.

• The recent release of first Pro CC still has bugs:)

  First Pro CC track matte questions - YouTube

  Premiere Pro CC Interlacing issues - YouTube

  The recent first Pro CC update has not resolved questions of bug I reported. I wonder if the bugs can be fixed or not.

  Super sorry for these questions, Andy. I have a bit of good news, if.

  1. The question of mast track is scheduled for a fix in the next major update.
  2. The issue of interlacing is scheduled for a fix in the next update.

  As far as the 3D rotating bug goes, I found an intern who has been closed a long time ago. I don't think it will be fixed for the following reason: you can already achieve the effect using different techniques.

  When it comes to most of the problems you describe, it's usually a matter of rendering pipeline that requires a change. To change the order to make pipeline is done by nesting. The clip of the scale, nest, and then add the 3D effect. It should work fine then.

  As an alternative, Premiere Pro has a video effect that acts as a motion effect, so that you can avoid nesting: transform. Just add the transform effect and change the stacking order of the 3D effect of pivot lower for this purpose. In fact, this seems to be preferred between the two.

  Kind regards

  Kevin

• Who are removed from the black list of Google, but still has 'Reported the Page attacks' in Firefox 18.0.1

  A site of mine was removed from the blacklist of Google, but he still has "Reported attack Page" even though I've updated for Firefox 18.0.1. (See the bug 820283 - https://bugzilla.mozilla.org/show_bug.cgi?id=820283)

  This looks like a problem with the sponsor.
  
  It occurs if the sponsor is disabled, so it seems that your server is still infected and redirects if it detects a godfather of Google.

  Forcing the godfather to Google and force a reload causes already forwarding.
  http://www.Google.com.my/URL?SA=t & RCT = j & q = % 22minda % 20jaya % 20language % 20center % 22 & source = Web & CD = 1 & CAD = AJLN & ved = 0CC0QFjAA & URL=http%3A%2F%2Fmj.edu.My

  You will need to contact the host to look into this.

  http://mj.edu.my/
  
  GET / HTTP/1.1
  Host: mj.edu.my
  User-Agent: Mozilla/5.0 (X11; Linux i686; rv:18.0) Gecko/20100101 Firefox/18.0
  Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
  Accept-Language: en-US,en;q=0.5
  Accept-Encoding: gzip, deflate
  Referer: http://www.google.com.my/url?sa=t&rct=j&q=%22minda%20jaya%20language%20center%22&source=web&cd=1&cad=rja&ved=0CC0QFjAA&url=http%3A%2F%2Fmj.edu.my%2F&ei=zYkHUcn7BO-k0AXS1oCwBg&usg=AFQjCNFk9gMFEWhR1Sb6huleXTJlop0lOw
  Cookie: fff58b804557285b9ce67d60b784a3d9=fee645cf421d30ecdacd55bb0798e922; s5_qc=6346dc723395e1ee8ef57f4883be4cb4a4xn
  Connection: keep-alive
  
  HTTP/1.1 302 Moved Temporarily
  Server: Apache
  X-Powered-By: PHP/5.2.17
  P3p: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
  Location: http://0001.2waky.com
  Content-Length: 0
  Keep-Alive: timeout=3, max=10
  Connection: Keep-Alive
  Content-Type: text/html
  

  http://mj.edu.my/
  
  GET / HTTP/1.1
  Host: mj.edu.my
  User-Agent: Mozilla/5.0 (X11; Linux i686; rv:18.0) Gecko/20100101 Firefox/18.0
  Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
  Accept-Language: en-US,en;q=0.5
  Accept-Encoding: gzip, deflate
  Cookie: fff58b804557285b9ce67d60b784a3d9=fee645cf421d30ecdacd55bb0798e922; s5_qc=6346dc723395e1ee8ef57f4883be4cb4a4xn
  Connection: keep-alive
  
  HTTP/1.1 200 OK
  Server: Apache
  X-Powered-By: PHP/5.2.17
  P3p: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM"
  Expires: Mon, 1 Jan 2001 00:00:00 GMT
  Cache-Control: post-check=0, pre-check=0
  Pragma: no-cache
  Set-Cookie: s5_qc=3416a75f4cea9109507cacd8e2f2aefca4xn
  Last-Modified: Tue, 29 Jan 2013 08:37:43 GMT
  Keep-Alive: timeout=3, max=10
  Connection: Keep-Alive
  Transfer-Encoding: chunked
  Content-Type: text/html; charset=utf-8
  

• BSOD on win server 2008 r2 std PAGE_FAULT_IN_NO_PAGED_AREA bug check code 0 x 50

  Hi all, I have this problem:

  My server gets a BSOD evrytime I try to log in, I can only log in safe mode.

  I've seen so many pages saying that this error is caused by a hardware failure, but I have not intall anything new on this, I guess an update caused the problem, I already ran the unsuccessful memory test, also had executed tools hard disk without finding anything to help solve the problem I have also updated the BIOS without success, I also uninstalled the latest updates but the problem persists. Can someone help me?

  • Server: DELL PowerEdge 310
  • OS: Windows 2008 R2
  • bug control chain: PAGE_FAULT_IN_NONPAGED_AREA
  • bug check code: 0 x 00000050
  • caused by the address: ntoskrnl.exe + 73c00

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF8A0103AF000, 0 X 0000000000000000, 0XFFFFF8000235FDFF,)
  0 x 0000000000000000)

  Ntoskrnl.exe - address 0xfffff800020c9c00 base at 0xfffff80002056000 DateStamp
  0x5684191c

  Thank you very much for your help!

  Oscar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• BSOD: For the Bug Check Code: 0000009F is probably caused by: nt Driver

  I recently met a problem with BSOD when I was afk or configure my computer to Hibernate, whereby Soluto has picked up the information on:

  Bug check code: 0000009F, probably caused by: nt DRIVER_POWER_STATE_FAILURE driver bug check has a value of 0x0000009F. This bug check indicates that the driver is in an inconsistent or invalid power state.
  How should I proceed? I got the message about 3 times prior.

  RS

  It was linked to rimvndis6_AMD64.sys RIM Tunnel driver of Research In Motion Limited.  I would like to re - install the latest driver available.

  If you continue to plant I would remove Avast & replace it with MSE

  Avast can be a cause of BSOD.

  Please delete and replace by Microsoft Security Essentials at LEAST FOR TESTER

  http://files.avast.com/files/eng/aswclear5.exe
  http://www.Microsoft.com/security_essentials/

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• Unknown device: Windows has stopped this device because it has reported problems (Code 43).

  I have Windows 7 Ultimate. Recently an unknown device keeps popping up in the device manager every time that I start to win. It is reported the location is in the front USB hub, but I haven't changed it anything lately. The device status says "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall or disable it but it will get picked up again the next time that I reboot. All other usb devices (mouse, keyboard, webcam, UPS APC, external hard drive, printer) work very well. How can I get rid of this nuisance so that it is not reappear?

  If the problem coincided with connecting the inverter APC that may indicate the problem is with the inverter.

  Somewhat similar situation discussed in the following link:

  http://www.velocityreviews.com/forums/t527369-APC-ups-USB-as-unknown-device.html

  Your situation sounds similar as "Information system" leading the 'problem of the device' has an error Code "this device is working properly" but still "unknown device".

  I would say to detach from the APC UPS of the computer and uninstall any software related.

  Restart the computer and see if the "Unknown device" problem resolves.

• BSOD problem error bug check code is 0xd1.

  Original title: BSOD issue.

  Hello

  I'm having consistent BSOD issues and have not recently installed new hardware other than a new keyboard. Might help you to check what the problem is please?

  minidmp files have been downloaded below

  https://onedrive.live.com/redir?RESID=3F8A3757B75723FF! 275 & authkey =! AJLWy31mgYj0vXE&ithint=folder%2c.rar

  Thank you for your help.

  Nick

  These accidents were caused by the cmudaxp.sys (description of the driver below.)  The bug check code is 0xd1.

  The debugging session: 20:46:57.022 Sun may 4, 2014 (UTC - 04:00)
  System Uptime: 0 days 1:17:13.657
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {fffff86c052b3410, 2, 0, fffff88005298e8b}

  Failed to load image \SystemRoot\system32\drivers\cmudaxp.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for cmudaxp.sys
  ERROR: Module load completed but symbols can be loaded for cmudaxp.sys
  Probably caused by: cmudaxp.sys (cmudaxp + 1c0e8b)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: fffff86c052b3410, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff88005298e8b, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802b1bc6168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  fffff86c052b3410

  CURRENT_IRQL: 2

  FAULTING_IP:
  cmudaxp + 1c0e8b
  fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XD1

  Nom_processus: chrome.exe

  TRAP_FRAME: fffff802b0d7e700-(.trap 0xfffff802b0d7e700)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff86c052b3390 rbx = 0000000000000000 rcx = fffffa8003c103e0
  RDX = fffffa8003c43130 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005298e8b rsp = fffff802b0d7e890 rbp = 0000000000000080
  R8 = 0000000000000040 r9 = fffffa8003c5eaa0 r10 = fffff880052b59f0
  R11 = fffff802b0d7e948 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  cmudaxp + 0x1c0e8b:
  fffff880 "05298e8b ff9080000000 call qword ptr [rax + 80 h] ds:3500:fffff86c" 052 b 3410 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff802b18ea369 to fffff802b18eb040

  STACK_TEXT:
  fffff802 'b0d7e5b8 fffff802' b18ea369: fffff86c' 00000000 0000000 a ' 052b 3410 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff802 'b0d7e5c0 fffff802' b18e8be0: 00000000 00000000' fffffa80 '03c103e0 00000000' fffff802 00000000' b0d7e700: nt! KiBugCheckDispatch + 0 x 69
  fffff802 'b0d7e700 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  cmudaxp + 1c0e8b
  fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]

  SYMBOL_NAME: cmudaxp + 1c0e8b

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: cmudaxp

  Nom_image: cmudaxp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51669462

  FAILURE_BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

  BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm cmudaxp
  start end module name
  05406000 fffff880 '050 d 8000 fffff880' cmudaxp T (no symbol)
  Loaded symbol image file: cmudaxp.sys
  Image path: \SystemRoot\system32\drivers\cmudaxp.sys
  Image name: cmudaxp.sys
  Timestamp: Sat Apr 11 06:45:54 2013 (51669462)
  CheckSum: 002A485F
  ImageSize: 0032E000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: C-Media Audio Interface Driver (WDM) C-Media
   Interface driver Audio ASUS Xonar DG
  HTO CLARO Audio Interface Driver

  Driver update site: http://www.cmedia.com.tw/EN/DownloadCenter_Detail.aspx?pserno=0&dtype=ALL
  http://support.ASUS.com/download/download.aspx
  http://www.htomega.com/downloads.html

  Uninstall and reinstall after a repair KB2862330, noted below.

  ================================================================================================
  Please delete Hotspot shield.
  ERROR: Module load completed but symbols can be loaded for hssdrv6.sys
  WARNING: Unable to verify timestamp for taphss6.sys
  ERROR: Module load completed but symbols can be loaded for taphss6.sys

  Driver Description: Hotspot shield
  Cause possible BSOD seen in mid-2012

  Driver update website: http://hotspotshield.com/
  ================================================================================================
  Please remove immediately update utility. This software is problematic and may corrupt your system

  Unloaded modules:
  fffff880 ' 17747000 fffff880' 1774f000 TuneUpUtilities
  Timestamp: unavailable (00000000)
  Checksum: 00000000
  ImageSize: 00008000
  ================================================================

  Check updates systems installed to KB2862330. Is it installed?

  This security update was initially released on 8 October 2013. The security update was re-released on January 14, 2014, for computers that are running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1. The reissue resolves an issue in which one of the pilots of the stack kernel USB 2.0 is not updated in some specific computer configurations.

  http://support.Microsoft.com/kb/2862330/en-us

  Note: compare the versions of your file in the link above. I suspect you've found BCCode 0xD1 due to improperly installed or missing update.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• I had to change my Apple ID because of accusations of fraud but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone with the new Apple ID 9.2 6s?

  I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.

  YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error "Windows has stopped this device because it has reported problems (code 43)" after the computer start in low resolution and remains after the connection

  Original title:

  Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please

  Have you tried to update your BIOS? Are there updates the firmware for your video card?

• has received the code 0000066A error while trying to install updates

  I was prompted to install the updates, but I received an error 0000066A code, what can I do to fix this?

  Has 66 error code when trying to install KB2160841
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3
  (Follow the steps described in this post by Diana D)

  Also, try the following steps (credit: Control_tps):

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  See also: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit

  J W Stuart: http://www.pagestart.com