Driver for old parallel port; This device has a problem: Code = 28 (0x1C)
We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.
I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.
[Peripheral problem]
Unknown device
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
Alloc resources: logical Configuration 0
Memory address range: Base = xFFB80000 End = xFFBFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xFFB80000 End = xFFBFFFFF
Filtered resources: None
Core resources: logical Configuration 0
Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
Driver: Driver is not installed
Standard 101/102-key or Microsoft Natural Keyboard
Keyboard
This device has a problem: Code = 27 (0x1B)
System failure: try changing the driver for this device. If this does not work,
see the documentation for your hardware.
The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
Alloc resources: None
Forced resources: None
Start resources: no
Filtered resources: logical Configuration 0
IRQ: mask 0: x 0002
IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
Core resources: logical Configuration 0
IRQ: mask 0: x 0002
IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
Driver: Keyboard\0003
Driver date: 23/04/1999
Driver: idvkd.sys
File size: driver not installed
File date: driver not installed
Driver: hidparse.sys
File size: 44368 (0xAD50)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.2222
Driver: hidclass.sys
File size: 23520 (0x5BE0)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.2222
Driver: hidvkd.sys
File size: 5088 (0x13E0)
File date: 23/04/1999-22:22
Legal name: Microsoft Corporation
File version: 4.10.1998
PCI card
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
Alloc resources: logical Configuration 0
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
HW revision: 004
Driver: Driver is not installed
Universal Serial Bus PCI
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
Alloc resources: logical Configuration 0
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
Forced resources: None
Start resources: logical Configuration 0
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
HW revision: 004
Driver: Driver is not installed
PCI system management bus
Unknown
This device has a problem: Code = 28 (0x1C)
The drivers for this device are not installed correctly. To install the driver
for this device, click the driver tab, then click on set to update driver.
The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
Alloc resources: logical Configuration 0
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
Forced resources: None
Start resources: logical Configuration 0
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
Filtered resources: None
Core resources: logical Configuration 0
IRQ: mask 0: xFFFF
IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
HW revision: 004
Driver: Driver is not installed
The motherboard seems to be Intel 915P chipset.
Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:
http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/
Then restart the computer.
Tags: Windows
Similar Questions
-
Windows XP SP III, device status: _ a driver (service) for this device has been disabled. Another driver can provide this functionality. _ (Code 32)
Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:
A driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
Information how to fix this problem would be apreciatedTry following the steps for Windows XP in the following MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. " Another driver can provide this functionality. (Code 32). »
I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)
Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?
If so, what is 'Data' for these names?
-
Hello
I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:
A driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32).
Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!
Try the following MS KB article:
http://support.Microsoft.com/kb/314060
Try following the steps for Windows Vista, which should also work for Windows 7.
-
Original title:
Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please
Have you tried to update your BIOS? Are there updates the firmware for your video card?
-
This device cannot start. (Code 10) with a hard usb pen and readers for windows 7
Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;
Reset
Re-creating image several times.
uninstall all the usb drivers on Device Manager Associates,
update drivers,
using the microsoft error fix program (fails to answer to find bespoke online solutions).
Any help would be useful.
Kind regards.
Hello Scott,
Thanks for posting your query in Microsoft Community.
I understand that you have problems with USB devices in the computer.
I would like to know some more information on this issue to help you better.
(1) that Microsoft fix program error have tried?
(2) remember to make changes to the computer, before this problem?
In the meantime, you can try to follow the following suggestions to solve the problem.
Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Registry backup
http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.
Thank you
-
Original title: driver for Windows game controller problem
My Logitch wireless gamepad F710 does not work laptop with my HP Pavilion dv6-6017tx PC Xinput mode (Windows 7 Home Premium 64-bit). But it works very well in mode Dinput. When I have this device in windows in Xinput mode displays an error in the window of the driver in detail which 'the drivers for this device are not installed (Code 28)'. I uninstalled and reinstalled the driver of Logitech software, but the problem is still there.
I tested this device to a desktop PC (Windows 7 Professional 32-bit), but this PC detects F710 controller using Xinput, working absolutely as planned without any installed driver software, provided by Logitech. In the details of driver in the PC window, it shows that his taking the pilot as "XBOX 360 Controller for Windows" and the driver file is xnacc.sys in system32 folder and when I searched my system32 laptop dv6 folder I found this file is missing and I n, t know why.I also tried to control windows search for drivers online, but windows has failed to find it.So what should I do now?Help, please!Thank you very much for the reply.
I thought about it finally.I installed the driver for the controller XBOX 360 for Windows on microsoft's site and installed. Then plugged the device and select the driver manually installation option and wanted Xbox 360 controller for windows driver in the list. Now my controller F710 currently also works well in mode Xinput and Dinput.Thank you very much. -
HP Compaq dc7700p: need driver for PC serial port
"Hello, I have a desktop Tower" HP Compaq dc7700p Convertible Minitowers "running windows 7 Ultimate and need driver for PCI Serial port... here's hardware id:
PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C & REV_02
PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C
PCI\VEN_8086 & DEV_2997 & CC_070002
PCI\VEN_8086 & DEV_2997 & CC_0700Thank you
Hello:
You need this driver... You may need to install it manually.
-
All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
Error: This device cannot start. (Code 10)
The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
The exclamation point is up there.Help, please
Thank you
Hello
This article can help...
http://support.Microsoft.com/kb/314060
Tricky
-
Map #2 Microsoft Tun Miniport
This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
???Hi AnaSk,
(1) since when are you facing this problem?
(2) remember to make changes?
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.
Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.
See the article below
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104 -
I have Windows 7 Ultimate. Recently an unknown device keeps popping up in the device manager every time that I start to win. It is reported the location is in the front USB hub, but I haven't changed it anything lately. The device status says "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall or disable it but it will get picked up again the next time that I reboot. All other usb devices (mouse, keyboard, webcam, UPS APC, external hard drive, printer) work very well. How can I get rid of this nuisance so that it is not reappear?
If the problem coincided with connecting the inverter APC that may indicate the problem is with the inverter.
Somewhat similar situation discussed in the following link:
http://www.velocityreviews.com/forums/t527369-APC-ups-USB-as-unknown-device.html
Your situation sounds similar as "Information system" leading the 'problem of the device' has an error Code "this device is working properly" but still "unknown device".
I would say to detach from the APC UPS of the computer and uninstall any software related.
Restart the computer and see if the "Unknown device" problem resolves.
-
I'll try to find a video driver for a compaq presario c502us which has xp pro on it
I'll try to find a video driver for a compaq presario c502us which has xp pro on it
Then try this one.
Paul
-
eReader says "this device has no installed books."
Hey there,
I just got a new Palm Centro (Verizon) and I have been searching for useful applications. I found the eReader application (from eReader.com and the page of Palm) and thought ebooks on my Palm would be neat. I downloaded and installed eReader Pro and also downloaded a few books of free - ebooks .net
I opened the file eReader and books, double-clicked on the. The PRC files (that added to the Palm install tool) and sync my Centro with my computer (although USB, all installed to internal memory)
When he finished I loaded eReader on my Centro and was greeted with the banner: "this device has no installed books."
I tried:
-New books (although all of free - .net ebooks)
-Move the files on an SD card in the root, PALM/Launcher and PALM/BOOKS folder
-Reinstall eReader
-With the help of the ereader version Palm.com
-Remove and then reinstall the books (at the location of various mentioned before)
-Soft-reboot the device between installs
-Hard-restart (remove battery) between installs
I'm not sure of what could be the problem. eReader will not let me browse for the files, there not everywhere where I put them, and I can't find an another ebook reader. I spent the last few hours looking for potential answers with google and this forum, but I found nothing. Any assistance that can be provided would be greatly appreciated!
Thank you!
-Jake
Hi, do the end of ebooks in .pdb for example: nameofbook.pdb
This is the only format eReader can read.
I don't know not free - ebooks .net or if they give a format .pdb .
ManyBooks.net @.
has a great selection all free.
When you want to download just click on Select Format and select eReader (.pdb)
All the best, woz of oz
Message edited by wozofoz on 04/16/2009 18:47 -
Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?
Hello
I suggest to refer to this link and follow the steps in this link and check if that helps:
http://support.Microsoft.com/kb/943104
It will be useful.
-
A usb driver for microsoft
Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005
Right click on desktop, select Properties. On the next page, top left click on Device Manager.
Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.
Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!) Restart the PC. Windows should then pick up the controllers & install the correct drivers. The only time where it will not install the drivers is when the USB host controllers are physically damaged. In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.
Maybe you are looking for
-
Need a card better wireless Satellite P750
Following my grief with wireless Intel 6235 in the thread below card I am looking for a replacement card WiFi Bluetooth, which has the best WiFi reception that card Atheros OEM. Suggestions please. At soon Simon http://forums.computers.Toshiba-Europe
-
How can I turn off display on MacBook Pro when it is connected to the external display?
I recently bought an external screen made by HP and I have a problem. When I connected it to my MacBook Pro, I would like to turn off the display on the MacBook Pro completely, because it is a loss of power. I tried to turn the brightness all in low,
-
remove icons from desktop download
I've been using a Canon Pixma MX 870 for printing with my new iMac 21 "Yosemite, but the scanner function does not work. I recently tried to install the scanner, including the new drivers, the operation failed, and now I have 2 Download icons on th
-
Acer aspire keyboard R11 does not
I have an acer aspire R11. It's the only 4months old and rarely used. He lights the other day and suddenly the keyboard and mouse work not at all. the mouse pad is and I tried to update and restart, and then the mouse pad does not work either. Could,
-
When I use the backup file it starts a formatt and when full gree it tells me it cann't fulfil the formatt. If I try to the computer drie E it does the same thing.