2 queues with the same name - does that mean?

Similar Questions

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• [.ini files] Get the value of multiple labels with the same name

  Hello!

  In an ini.files, I need to get the value of each tag named in a certain way in a section, but unfortunately, I have 3 or 4 tags with the same name in several sections. I don't know how to retrieve these values, the program always consider that the first tag and not others, I tried to remove each tag after obtaining its values, that he did not.

  Does anyone have an idea to solve the problem?

  Thank you!

  As you can read in my last post, you must read and throw 'x' lines:

  OpenFile)

  Skip lines

  for (i = 0; i< x;="" i++)="" readline="">

  Start reading the useful lines

  ReadLine () / / read a line

  ... / / Interpret the line

  Don't forget to add a control during i/o operations of robust error and to check the end of the file.

• 2 separated registered photos with the same name of file/number.

  How can I separate 2 or more photos with the same name of file/number. Consult us in the case that I see a photo and when I open it I see a different picture. The second photo is not the case in the folder, but still I need to save. It seems they are crushed.

  How can I separate 2 or more photos with the same name of file/number. Consult us in the case that I see a photo and when I open it I see a different picture. The second photo is not the case in the folder, but still I need to save. It seems they are crushed.

  =============================================
  FWIW... If a picture was crushed (replaced), it is unrecoverable.

  Are you saying that the vignette does not match the full size photo?

  How_exactly_are you look at one picture?

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Two objects with the same name

  Hi all

  In my production database, there is a materialized view and a table with the same name. The two objects have the same number and type of columns.

  Record from user_object table

  OBJECT_NAME

  SUBOBJECT_NAME

  OBJECT_ID

  DATA_OBJECT_ID

  OBJECT_TYPE

  CREATED

  LAST_DDL_TIME

  TIMESTAMP

  STATUS

  TEMPORARY

  GENERATED

  SECONDARY

  NAMESPACE

  EDITION_NAME

  TEST_OBJ

  151373

  151373

  TABLE

  22/06/2012

  22/06/2012

  2012-06 - 22:15:39:30

  VALID

  N

  N

  N

  1

  TEST_OBJ

  152287

  MATERIALIZED VIEW

  22/06/2012

  08/03/2012

  2012-06 - 22:16:08:46

  VALID

  N

  N

  N

  19

  I have another mode to normal display, TEST_NORMAL_VIEW, which selects the data of TEST_OBJ.

  Then, on which table data select. Please give some input on this subject.

  Kind regards

  Matondo

  A materialized view has 2 objects internally for her

  1. the materialized view (it is more of a model)

  2. the table that stores the actual data.

  So when you create a materialized view, you can see 2 objects created by querying the USER_OBJECTS.

  See this

  SQL> create materialized view my_test_mv as select * from emp;
  
  Materialized view created.
  
  SQL> select object_type, object_name, data_object_id from user_objects where object_name = 'MY_TEST_MV';
  
  OBJECT_TYPE        OBJECT_NAME          DATA_OBJECT_ID
  ------------------- -------------------- --------------
  TABLE              MY_TEST_MV                  1638964
  MATERIALIZED VIEW  MY_TEST_MV
  

  Now, you may notice that DATA_OBJECT_ID has null for the MV. DATA_OBJECT_ID is the Segment where the data is stored. As MV object is just a model and does not have data to null.

  The user has no direct access to the MY_TEST_MV table. See this

  SQL> drop table my_test_mv;
  drop table my_test_mv
             *
  ERROR at line 1:
  ORA-12083: must use DROP MATERIALIZED VIEW to drop "KARTHICK"."MY_TEST_MV"
  

  Also, you can associate an existing table to a materialized using the clause ON TABLE PREDEFINED view.

  Here is an example

  SQL> drop materialized view my_test_mv;
  
  Materialized view dropped.
  
  SQL> create table my_test_mv_new as select * from emp;
  
  Table created.
  
  SQL> select object_type, object_name, data_object_id from user_objects where object_name = 'MY_TEST_MV_NEW';
  
  OBJECT_TYPE         OBJECT_NAME          DATA_OBJECT_ID
  ------------------- -------------------- --------------
  TABLE               MY_TEST_MV_NEW              1638967
  
  SQL> create materialized view my_test_mv_new on prebuilt table as select * from emp;
  
  Materialized view created.
  
  SQL> select object_type, object_name, data_object_id from user_objects where object_name = 'MY_TEST_MV_NEW';
  
  OBJECT_TYPE         OBJECT_NAME          DATA_OBJECT_ID
  ------------------- -------------------- --------------
  TABLE               MY_TEST_MV_NEW              1638967
  MATERIALIZED VIEW   MY_TEST_MV_NEW
  
  SQL>
  

  Once you associate a Table with a MV direct Table access is limited. You can directly access only the MV.

• Help! Need a script to automatically open files with the same name but in another location.

  Good morning friends,

  So for my work, I need a script to open files with the same name but located in a different folder. But since I'm a total noob when it comes to programming, I can't understand how do. That's what I have in mind:

  -J' I manually open an image.

  -The script will look for a file with the same name in another folder that I've specified.

  -The script will then select the channel CMYK of the second file and copy and paste it into the first file.

  -The second file is then closed without saving the changes.

  I have problems with the part where the script searches for a file with the same name as the opened file. I would really appreciate help. Thanks in advance.

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var Nomdoc = myDocument.name;

  try {var basename = docName.match (/(.*)-.)} [ ^\.] +$/)[1]}

  catch (e) {var basename = thedoc.name};

  var path = / * path of folder to insert as a string here * / + ' / ' + base name + / * insert file extension, including the period as a string here * /;

  If (queue (path) .exists == true) {var otherDocument = app.open (File (path))};

  };

• XOQ-01950: Cube contains several BuildSpecifications with the same name.

  Hi all
  
  When executing the option to maintain Cube he throws under question: any clue?
  
  XOQ-01950: the AWCubeOrganization for cube 'NN_OLAP_POC. MARKET_SALES_CUBE"contains several BuildSpecifications with the same name.
  
  Thank you
  Exq

  This error should show only upward when you create a cube (by importing XML), not when you maintain. So, I'll assume that's what you hear.

  If you are importing XML that references an OLAP object that already exists, whereas the new definition replaces the old. The only exception to this rule is the BuildSpecification object. This kind of object is called, but it does not follow these conventions (for reasons of disorder of implementation). If you import the XML code that has a BuildSpecificaiton with the same name as one that already exists, then you will trigger the error you see. Here is a relevant example of XML.

  The solution is to remove this section from the XML before importing it.

• CF8 cfquery multiple table join with the same names of columns - default

  This seems to be a defect in the CF8 cfquery object. I'm at a loss as to a solution or a good work around. With regard to the substance, this query is generated dynamically on the fly based on what is happening in it a user. This isn't the most elegent SQL but work and return all columns. The app itself is a data viewer to look at the logs. Here is an example of a query being generated.

  Select *.

  of web_trans, web_info_trans, web_res_trans

  where (web_info_trans.trans_dte > = '' 2008-12-1)

  and web_info_trans.trans_dte < '' 2008-12-2)

  and (web_info_trans.trans_dte = web_trans.trans_dte)

  and (web_info_trans.trans_num = 5060345)

  and (web_info_trans.trans_num = web_trans.trans_num)

  and (web_res_trans.trans_num = 5060345)

  and (web_res_trans.trans_num = web_trans.trans_num)

  and (web_trans.web_trans_cde = "NTUI")

  and (web_trans.web_status_cde = 'P')

  and (web_trans. TRANS_NUM < 5060347)

  order of web_trans. TRANS_NUM / / desc

  These three tables contain a similar column called ZIP_CDE. They contain different values, and when this query is executed in Microsoft Query Analyzer results are displayed correctly. Run this same query SQL with CFQUERY and the value of one of the other tables (web_trans) will eventually replace the value for the other columns called ZIP_CDE. The exact amount columns are retruned only values some how get corrupted.

  This is a defect of cf8 is a book autour or an update that resolves this problem that I may have missed?

  Thank you for the ideas.

  Thus it seems still as a default since CF is essentially where, except for the return value play. Other query tools return results correctly so for me, it turns out be CF bug at a certain level.

  Actually I'm swinging to agree with you here, but not for the same reason.  CF actually * is * get all the columns back (as you say), it just doesn't expose a way to tell the difference between a column called 'x' and an another column called 'x', because the way to access the data in columns is simple queryname [columnName] [rowNumber] (or a Variant fo this, but all the amount of variations to that or abbrev. it).  This code shows how he has all four columns of the original two queries (being a stand-in for tables, in this case):

  
  Q1 = queryNew("");
  Q2 = queryNew("");
     
  queryAddColumn (q1, 'id', [1,2,3,4]);
  queryAddColumn (q1, "data", ["one", "two", "three", "four"]);
  queryAddColumn (q2, 'id', [1,2,3,4]);
  queryAddColumn (q2, "data", ["tahi", "rua", "toru", "wha"]); It's Maori, in case you are interested
  

  
  SELECT *.
  Q1, q2
  WHERE q1.id = q2.id
  
  

  So CF knows there are four columns (a call getMetadata (q3) get also demonstrates this), but it does not expose a way to approach the second (or even greater) column of the same name.  This is the bug/shortfall.

  However, relying on an underlying coldfusion.sql.QueryTable method, you can rename the columns, so:

  Then you're OK.

  I would be normally reluctant to recommend doing this, because these methods change from version to version of CF, but it's your call whether this approach will help you.

  To be honest, I'm with Owain who, even in SQL one generally doesn't work with columns with the same name, an alias them qualified with a table name/alias. As the table columns from of is not returned by SQL with the result set, it must be evidence against this by folding the columns in the first place.

  Also, I wonder at the bottom of the extraction of data, you don't really know the structure, that is to say, do SELECT *.  How can you know not even that is ours as the first column, second column, etc.?  I don't think that SQL applies in fact a contract that, t - it?  (I don't know).

  What are you actually do here?

  --

  Adam

• Attributes with the same name - ADF BC Validation Messages

  Hi all
  
  I have two entities and associated views. Each of them have attributes with the same name. In my particular case, they are two dates - StartDate and EndDate. EndDate on both entities have validations (Expression of Script). The validations to check that the end Date is later than the Date of departure - "return newValue > StartDate. Is this a valid validation groovy script for dates?
  
  I have a unique creation page that contains these two entities. What is happening now, is that if the validation fails even one of the entities, fields of both entities are reported. In some cases, I can even see two validation error messages is displayed.
  
  Needless to say, rename the attribute on one of the entity (and the corresponding view object) seems to work.
  
  I have a simple repro case (contains Jdev project and SQL script) here - http://dox.bijesh.info/reproValidationMsg.zip and a screenshot here - http://dox.bijesh.info/ReproADFBCValidation.jpg
  
  Would be very happy if someone could either point out what I'm doing wrong or confirm that it is a bug.
  
  About:
  
  JDeveloper 11.1.1.3.0 JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  11.1.1.56.60 ADF business components
  Oracle IDE 11.1.1.3.37.56.60
  
  Edited by: Bijesh Krishnadas November 25, 2010 04:21 - corrected the groovy expression

  Bijesh Krishnadas wrote:
  FWIW, I've changed the validation script for "return false" on an entity and "return true" on the other. This leads to the same question as well.

  This seems to be a bug.

  However, using a validator compares as stated earlier is the right way to accomplish what you're trying to do.

• How to create two employees with the same name as the vendor record?

  Hi all
  
  We must create a vendor for the employee record, so that we can issue pretty invoice for cash payment. If there are 2 employees with the same name, how can we create records of supplier for these 2 employees? The system does not have the name of the provider in duplicate.
  
  Please notify.
  
  Kind regards
  HY

  Hello

  In R12, it is possible to create 2 employee with the same name but with a different number.
  And it is also possible to create these 2 employees as suppliers in Payables.

  HTH,
  Vik

• It is possible to have two tables with the same name in Oracle!

  Oracle Version: 10 gr 2
  
  MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.
  
  MS-Access mess around Oracle data dictionary.
  
  When you issue

  SQL>select * from tab;
  
  TNAME                          TABTYPE  CLUSTERID
  ------------------------------ ------- ----------
  AMStates                       TABLE
  Version                        TABLE

  You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will

  SQL>desc Version
  ERROR:
  ORA-04043: object Version does not exist

  You can even create another table with the same name in the schema

  SQL>create table VERSION (X NUMBER);
  
  Table created.

  Why this is happening and how can I bring these items 'non-existent '?

  Hello

  Use

  SQL > desc 'Version '.

  Or

  SQL > select * from 'Version '.

  Or

  SQL > drop table 'Version '.

  To overcome the problems of mixed-case.

• several devices on the network with the same name

  I want to install Windows 7 OS computers on a domain with Small Business SERVER 2003.  Curiously, I see all the computers on the network, where I should be able to, but one of them WK02011, is not accessible from all Windows 7 systems because there are multiple devices with the same name on the network according to a diagnosticn check.  WK02011 is visible and accessible from other systems on the network that are runjning XP OS.  There is only one device named WK02011 on the network.  I don't have this problem with any other XP system - that is - I can see and access all of the other XP machines on the network with the exception of WK02011.  I can't access WK2011 from the server and the server indicates that it is multiple devices with the same ID.  Rename the XP would be complicated because of having to re - set up the service to the customer and then turn around and install 7 OS in the workstation in the coming days.

  How to find the ghost device double?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows 7 on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Renaming of files exe with the same name

  I have

  just installed a game on steam.  The package ended up being buggy, so it did not work.  But I found a solution on the Forum and he told me to rename these two files exe under the same name.  Its the only way to fix the game.  Others did and cela worked.  When I try to rename the file an error pops up telling me that I can't have two files with the same name.  In summary, this is what is happening.

  two files are: prince of persia.exe and princeofpersia_launcher.exe .

  Need to rename it to princeofpersia_launcher.exe to the prince of persia.exe

  An error pops up saying ERROR RENAME FILE or FOLDER: cannot rename princeofpersia_launcher: a file with the specified name already exists.  Specify a different file name.

  The problem is that these two exe files MUST have the name of prince of Persia: work.  Is it possible that I could do?

  It is not possible to have two files with the same name in the same folder.  Something is wrong with the instructions that you try to follow.  What do say exactly?  Can you give us a link for them?
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.