2012 - Windows Server R2 - short name of Windows domain

Similar Questions

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Can I use ASM / ME to windows server 2012 file server failover clustering?

  Hi all

  Can I use ASM / ME to windows server 2012 file server failover clustering?

  We can use it with exchange, sql, sharepoint,..., but I can't find any document for file server.

  Thank you.

  HIT / working ME with CSV W2K12/R2, W2K8 CSV volumes cannot bear not to cancel the MAPPING is the main difference.  But HITTING / will allow ME to create the active copies and replicas of volumes CSV

  Yes the cluster file shares are supported with SUCCESS / me.    If you think about it, SQL, Exchange are indeed a "sharing".   Because it is an NTFS volume with services that run against her.  SQL, Exchange or fileshare services.

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• compatibility of Windows 7 Home Premium with Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012.

  Hi, I'm going to buy a new laptop in which I get Windows 7 Home Premium. I'm going to use MS Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012. I'll use the other tools of development also. I just want to know fact these races of software in this operating system.

  It's the operating system have a compatibility issue with these software or other tools of development.

  Best place to look is the MS site for these products and consider the requirements specified

• DELL PowerEdge T710 support for 2012 Windows

  Hello

  I was reading this document on the support Windows 2012:

  http://en.community.Dell.com/TechCenter/OS-applications/w/wiki/4149.Dell-PowerEdge-server-support-for-Windows-Server-2012-and-its-features.aspx

  If I understand correctly T710 is supported for the installation of Windows 2012 as:

  Support Dell - qualified.

  And 'X' means that the long-term 2012 Windows: error memory consumed, Collaborative processor performance counters, logic processor idling, compatible device name are not supported on this server. Only SR-IOV future is supported?

  Thank you

  That is right.  Consumed memory error, the processor performance counters Collaborative, idling logical processor and compatible device Naming are only available on generation servers 12.   Server 2012 will take place on the T710.

  Kind regards

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Laboratory of vSAN in 0, 00 b ability (R2 2012 Windows vCenter) Workstation

  Hello

  I'll put up a Beta RC 6 environment vSphere in Workstation 10.0.4 and want to activate VSAN.

  The configuration steps correctly to my knowledge--> only the problem is there is exactly 0, 00 b vSAN capacity available.

  My setup;

  * OCZ Revodrive 500GB SSD

  * 10.0.4 Workstation / Windows 8.1

  * vSphere 6.0 RC with 3 knots of ESXi and vCenter based windows

  * Machines virtual ESXi have 3 vDisks, 1 for ESXi and two additional VSAN.

  * extra vDisk 1 = 10 GB for the emulation of SSD (10 SSD passtrough workstation does not work out-of-the-box with the Revodrive).

  * extra vDisk 2 = 100 GB of data vSAN.

  * Detection of SSD is emulated by the parameter "SCSIx.y.virtualSSD = true".

  * vmk is active vSAN

  * cluster = vSAN licensed

  

  I also do not operate on 5.5. U2.

  Please notify

  Hello

  I actually found the guilty myself; There is a known bug with 10 (10.0.4) Workstation and R2 2012 Windows networking, I was using as a vCenter server.

  Networking has been very bug, sometimes there was a connectivity and sometimes it was not.

  See the networking of VMware Workstation 10 bug/question/problem

  (workaround e1000e failed also in 10.0.4, because he was already using this parameter for the network card)

  When you use VCSA, worked vSAN configuration

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• Adding an ESX3i server to a windows domain

  Hello

  I have a server with ESX3i installed and working properly. My question is this: is it possible to add the ESX3i server to a windows domain?

  I would like to be able to access the server to ESX3i by its name rather than its IP address, especially since I need to use the DHCP protocol within our corporate network.

  Kind regards

  Alexandre Perez

  Hello and welcome to the forums.

  Sounds like what you really want is the name resolution with the DNS servers of your Windows domain.

  If your DHCP server is configured dynamically updated DNS, then you should be fine.  Another option would be to set up a reservation in DHCP for your ESX host and then add an entry in DNS for him.

  Good luck!

• Apple caching server in a Windows domain?

  Hello

  We seek to add caching to the Apple services to our WIndows domain. It seems that we need a DNS server to do? Does anyone know the DNS settings, which can be placed on our servers DNS Windows to Apple devices point to the caching server?

  Thank you

  If your PC can access the internet using your DC as DNS server (which is the usual case in an Active Directory environment) then you will should not do something else. But a man of what DNS it is, is not the same as another. Anther thing that you should be aware, that's if your environment uses a proxy. In which case you may need to this twist a bit then as caching and access is not limited somehow.

  There are some useful articles/guides you might look at first before moving forward:

  http://help.Apple.com/ServerApp/Mac/5.1.5/#/apd6015d9573

  http://help.Apple.com/ServerApp/Mac/5.1.5/#/apd74DDE89F-08D2-4E0A-A5CD-155E345EF B83

  http://help.Apple.com/ServerApp/Mac/5.1.5/#/apd5E1AD52E-012B-4A41-8F21-8E9EDA565 83

  Content types supported by the caching service in OS X Server - Apple Support

  https://www.yesdevnull.NET/2013/10/OS-x-Mavericks-server-setting-up-caching-serv er.

  http://krypted.com/Mac-security/the-new-caching-service-in-OS-x-server/

  http://blog.fraserhess.com/2013/11/caching-server-2.html

• Problem with OpenManage on a T300 with R2 2012 Windows

  When I install OpenManage on a PowerEdge T300 with R2 2012 Windows and it is originally a 'limited' warning of network connectivity and connection to the gateway is lost. I have to run a network card 'repair' every time that the alert go away and the restored network connection. Even after a reboot, I still have to run the repair. When I uninstall OMSA network card works fine. I tried OMSA version 7.3, 7.4, 7.4.0.2, 8.1. The matrix of compatibility on the Dell site seems to show that it should be compatible with 8.1 and 7.4 (on a T300 with 2012 R2). Our network card is a Broadcom NetXtreme Gigabit (version 17.0.0.3 driver). Everyone knows about this problem? I come to a legacy version, although compatibility documentation does not appear 2012 R2 as as operating system supported?

  Tstout21,

  The problem you are having sounds like an updated version of firmware on the network card. I suggest you uninstall OMSA, then restart and update the network map. Although the update of the firmware should fix, I suggest that we update the driver as well up-to-date. You can not the driver and firmware here. After completing the updates, restart and go forward then reinstall OMSA.

  Let me know how it goes.

• can I transfer anniversaries of 2012 windows live calendar calendar 2013?

  I'm wonderiing if there is a simple way to transfer birthdays of 2012 windows live calendar to the 2013 calendar without manually entering every birthday a month?

  Hello

  1. Select the birthday
  2. Double click on it
  3. On the 'Event' tab, find "recurrence".
  4. In the drop-down menu, select "annual".
  5. Save
  6. Repeat for each birthday

  It will be useful.

• Unable to get R2 2012 Windows Installer

  I have configured the RAID and R2 2012 Windows Setup detects.

  However, when I select the drive, you receive the following error message:

  "We could not create a partition or create an existing one."

  BIOS version: 2.0.19

  Any ideas?

  I managed to solve this problem by disabling the internal SD card in the BIOS.