Unable to get R2 2012 Windows Installer

Similar Questions

• iMac 2015 Unable to Boot Camp and Windows Installer

  I've been back and forth with a Service guy to customers by phone, but thought I'd throw so the question in the case to see if there were others who have experienced similar problems and might be able to help.

  I have an iMac, retina 5K, 27 - in, end of 2014. It allows to launch the Boot Camp with Windows 8.1, which I put in place about 1 year ago. It worked very well. But then, I decided to try to upgrade to Windows 10 about 3 weeks, which is not well. Decided to erase the partition via the wizard Boot Camp and re - install from scratch.

  Now, I can not install Windows at all. I've tried everything. Using another ISO downloaded from the Windows website. Check disks using first aid. Last night I even totally erased the readers (via the terminal in recovery mode, with the help of the man of CS) and made a "Reinstall internet" of the operating system and then tried in boot camp. Without success.

  I tried to call Microsoft too, but their position on the whole thing is "this is on a Mac, this is the problem to Apple. Bye. »

  Appearances, Assistant Boot Camp is successfully created a partition. The system resets the Windows installation each time and I spend the flow rate of the installation until I get to the section "where you want to install Windows? I select my Bootcamp partition, format and then click Next. That's when I get the error message "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  If I quit the installer and restart on the side OSX, I see that the new partitions is to Windows NTFS, so it seems ok. I am completely puzzled and frustrated as * at this stage.

  Any thoughts? Ideas? Help? Please?

  Data sheet:

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz of Intel Core i7 processor

  16GB 1600 MHz DDR3 memory

  AMD Radeon R9M295X graphics 4096 MB

  What are the external devices connected to the iMac during the installation of Windows?

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• I get this message windows installer

  is not properly installed and also get the set up of controller has encountered a problem during installation. Please check the log files for more information about the error, what it's all about

  Go to http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml and download and run the Windows Installer Cleanup utility, and that should fix the problem with Windows Installer.

  I hope this helps.  If this is not the case, after back and let me know what happened.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to get updates of Windows after cleaning installed.

  Inspiron 1720, Win7 Ultimate x 64

  A clean installed today on a separate partition. Did not remove the existing installation of the same operating system by using the same key. The new facility will not download updates. C:\ shows many files from Windows.old. No matter what jump to anyone or is this Win10 Win10?

  PS This switch to Win7 Professional would help the situation?

  I should add that it is a slipstreamed SP1 version. I was able to get IE 11 installed without problem.

  Theres been a few problems with Windows Update with Windows 7 clean install for these last months... You can use the WSUS Offline Update Patch Windows 7, after that Windows Update works.

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  However since your goal is to make your system a Pro 10 Windows device. You better just download an .iso Windows 10 TH2 and pure install directly with your Windows 7 Ultimate product key:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

• Unable to get an active Windows Professional 7 right.

  Since 3 days ago a message "this copy of windows is genuine nog" down to the right of the screen of my son.

  When I go to the activation window I have the choice between

  -online activation
  -buy the new product key
  -Retype the key
  -other means

  Online gives "the product key must be activated with new material. It is true; as I had a major accident & loss of data when Windows Vista came out, I installed this 7 first on an old computer & tried out there. I had it installed on another configuration (which is now already as undesirable, so that it is out of service).

  Product to retype key makes no difference (which is normal)

  Otherwise there is the good old phone activation, but when I'm there I get

  "an error has occurred."
  You can also contact microsoft by phone to help solve this problem.
  code 0 x 80000048
  Impossible to find a detailed error description
  installation code is null
  Setup error; 0 X 48 (72L)

  If I click on this box here, I get a screen with the closest location, where there is nothing to choose. Is there just no visible places.

  If I click Next, I get the error code 0 x 80000045 and then I get a phone call, number which is not even a European number, and I refuse to be called intercontinental to resolve an error that Microsoft is responsible for.

  What can I do to get this to work? This experience really does not move me from my other pc to 7...

  What should I do if I receive an error 0xC004F061 when activating Windows 7. URL

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Unable to get updates for Windows 7

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: why I can not get windows update?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  * original title - why I can not become windows update? *

  Could be a number of reasons, please see the following: How toManage , Configure and Troubleshoot Windows Updates releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Problems with Windows Installer, now unable to download Silverlight

  Impossible to get netflix and other applications without silverlight and can't get silverlight without windows installer. help to

  Original title: the windows installer was lost. somehow, I can 't download silverlight SUPPORT.

  Hello

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  3. What is the full and exact error message?

  I suggest to consult the article and try to uninstall the program:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If the problem is not resolved, please provide more information to help you best.

• Windows Installer Service unavailable.

  Currently have Windows Vista Home Premium.  I'm unable to install or unintall anything. I am logged in as administrator. I've tried several things last week, I don't remember all.   Is it possible to correct windows installer before you completely reinstall the software?

  Hi akagiggles

  Please click on the link below and get/run this Windows Installer Cleanup utility.
  http://support.Microsoft.com/kb/290301

  Please post back and let us know if it helped to solve the problem. -Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• Windows Installer service is not correctly registered

  I need to download. Net3.5 SP1 for TurboTax. When you attempt to load the software, I have to questions that said. NET2 did not work properly. I deleted the file and I try to reintall. NET2 however I get an error windows installer service is not properly registered and won't complete installation. How can I register WIS? I also had BOUNCING messages saying that setup.exe ran in another program, even though I was not running another program. It's somehow connected?

  Windows Installer error, see...

  Blog of Aaron Stebner: TurboTax 2009 can not settle because he thinks of the .NET Framework is not installed, even when it is
  http://blogs.msdn.com/astebner/archive/2010/01/26/9953883.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 1726 Package Windows Installer.

  I have a PROBLEM DAMNED! with WIP (install windows package) his makes me crazy, im trying to install FSX after he lost activation and now I try to install it and just like its finished it comes up with some kind of error message I think the error code is "1726" and he also said something on MSDN, please help!

  Hello adieb00,

  You can try to install the latest package of windows install and check if you are able to install FSX

  Link to get the latest windows installer:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Scroll down the page and select the third file to download, that is ( . Windows6 0-KB942288-v2-x 86.msu 1.7 MB download )

  If it does not, please reply back with the exact error message

  Abdelouahab

• ERROR:-1603 FATAL INSTALLATION ERROR. Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  I try to install the Microsoft Flight Simulator X game
  but I get the error message
  "ERROR:-1603 FATAL INSTALLATION ERROR.
  Get help with Windows Installer (Msi.chm) or MSDN
  For more information. »
  Can someone help me on this? I am using Windows XP Pro.

  Hello

  Can I know the computer brand and model?

  I suggest you follow these methods and check.

  Method 1: has access the below link and follow the steps mentioned and check.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

  Method 2: Refer to the following article and try the steps.

  Error message when you install a Microsoft game or a mapping program http://support.Microsoft.com/kb/258496

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Windows Installer has stopped working.

  Whenever I try to install anything I get this: "Windows Installer has stopped working".

  Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton antivirus.

  When I entered msiexec /? I get the same thing: "Windows Installer has stopped working".

  -----

  Also if I go here C:\Windows\SysWOW64 perform msiexec.exe it I get this:

  Windows® Installer. V 4.5.6002.18005

  msiexec/option [optional parameter]

  Installation options
     
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
     
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  ---------------------------------------------------

  However if I go in "C:\Windows\System32" and run the msiexec.exe which is where I get:

  "Windows Installer has stopped working".

  And another window that says:

  "The application could not initialize properly (0 x 0000005). Click OK to close the application.

  ----------------------------------------------------

  Edit:

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  I was able to install only certain programs.

  I was able to install the rescue of the music. But I wasn't able to install iTunes 9.2

  -------------------------------------------------------------------------

  I am running Vista Home Premium:

  Version: 6.0.6002 Service Pack 2 Build 6002

  64 bit

  How can I fix it?

  Haha. Thank you Michael.

  But I have to able to do work properly now. I'll post any major change (that I remember), just in case where someone wants to try what I did.

  ---------------------------------------------

  I deleted everything I could in my temporary files.

  Then I went "HKLM\System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" and cleared the entries.

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  Restarted my PC

  HKLM/System/CurrentControlSet/Services/msiserver/ImagePath change back to "%systemroot%system32\msiexec c".

  A run "cmd" and input "msiexec /unreg" then he walked "msiexec/regserver".

  My PC rebooted again

  Profit :D

  Worked for me.

• Impossible to uninstall the windows installer does not properly

  I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support

  Have you tried to install the latest version of Windows Installer?

  Otherwise, try to run the following from start-> Run:
    msiexec /unregserver
  Then,
  msiexec/regserver
  
  
  
  

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.