2013CPU APRIL: "the file in the patch is not a known file of the Oracle Applications.

Similar Questions

• Perl not defined to the Oracle Applications environment. (Libraries T2K not in INC.

  Hello
  
  Am getting the following error when applying patches autoconfig.
  
  $FND_TOP/patch/115/bin/txkprepatchcheck.pl
  Perl not defined to the Oracle Applications environment. (Libraries not in the INCLUSION list T2K)
  Make sure that automatic configuration was performed and found a source correctly your environment.
  /U01/tech/appl/FND/11.5.0/patch/115/bin/txkprepatchcheck.pl line 131.
  BEGIN failed--compilation missed the line 141 /u01/tech/appl/fnd/11.5.0/patch/115/bin/txkprepatchcheck.pl

  Fine.

  (1) source the environment file
  (2) make sure that 'APPLRGF' variable is set in the environment. If this isn't the case, set it to the same value as "APPLTMP".
  (3) in the place where this patch was unzipped, patch_top/patchnumber/fnd/patch/115/bin.

  Run the utility as follows:

  Platform command line

  UNIX or Linux (must be a single line)
  ./txkprepatchcheck.pl-script = ValidateRollup-outfile = $APPLTMP/txkValidateRollup.html - appspass =

  do not FND_TOP/patch/115/bin

• Deploy a war in the Oracle application server

  Hello
  
  We have a few Oracle discoverer running on the oracle application server and I would like to deploy a war to the service file.
  Can someone tell me if its possible to do?
  Should I just drop the war in the deployment of the server folder?
  
  Thank you
  KK

  Wrong forum.

  Move the thread (close and re-post) to each of discoverer
  or somewhere in http://forums.oracle.com/forums/category.jspa?categoryID=193 (probably Oracle ACE - general forum).

• API to create the purchase order in the Oracle applications?

  Hi all

  Can you please tell me the API to create the purchase order in the Oracle Applications.

  Hello

  Please read the screenshot. There is no standard API to create a purchase order.  Better go to the open Interface to create the purchase order.

  

• The Oracle Application is unresponsive after it, connecting to the client computer

  Configuration:

  The application is 12.1.2

  Database is 11.1.0.7

  Operating system is RHEL 5

  It is hosted on the servers of node 2

  The Oracle Application is unresponsive after it, connecting to the client computer

  The application of form does not completely open

  It throws the below error:

  NoClassDefFoundError:

  Oracle/apps/fnd/util/Parameterlist

  We get the error in the Java Console on all desktops here below.

  Provider of Java: version of Sun Microsystems Inc.: 1.6.0_07

  Passage level: 0, read timeout:90000

  Applet is signed and approved

  proxyHost = null

  proxyPort = 0

  connectMode is HTTP, native.

  Version forms cmdlet is: 10.1.2.3

  
  

  java.lang.ClassNotFoundException: oracle.apps.fnd.soa.forms.services.rt.CommBean

  at sun.plugin2.applet.Applet2ClassLoader.findClass (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass0 (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName (unknown Source)

  at oracle.forms.handler.UICommon.instantiate (unknown Source)

  at oracle.forms.handler.UICommon.onCreate (unknown Source)

  at oracle.forms.handler.JavaContainer.onCreate (unknown Source)

  at oracle.forms.engine.Runform.onCreateHandler (unknown Source)

  at oracle.forms.engine.Runform.processMessage (unknown Source)

  at oracle.forms.engine.Runform.processSet (unknown Source)

  at oracle.forms.engine.Runform.onMessageReal (unknown Source)

  at oracle.forms.engine.Runform.onMessage (unknown Source)

  at oracle.forms.engine.Runform.sendInitialMessage (unknown Source)

  at oracle.forms.engine.Runform.startRunform (unknown Source)

  at oracle.forms.engine.Main.createRunform (unknown Source)

  at oracle.forms.engine.Main.start (unknown Source)

  at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.start (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  java.lang.InterruptedException

  at java.lang.Object.wait (Native Method)

  at oracle.forms.engine.Heartbeat.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Provider of Java: version of Sun Microsystems Inc.: 1.6.0_07

  Passage level: 0, read timeout:90000

  Applet is signed and approved

  proxyHost = null

  proxyPort = 0

  connectMode is HTTP, native.

  Version forms cmdlet is: 10.1.2.3

  java.lang.ClassNotFoundException: oracle.apps.fnd.soa.forms.services.rt.CommBean

  at sun.plugin2.applet.Applet2ClassLoader.findClass (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass0 (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass (unknown Source)

  at sun.plugin2.applet.Plugin2ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName (unknown Source)

  at oracle.forms.handler.UICommon.instantiate (unknown Source)

  at oracle.forms.handler.UICommon.onCreate (unknown Source)

  at oracle.forms.handler.JavaContainer.onCreate (unknown Source)

  at oracle.forms.engine.Runform.onCreateHandler (unknown Source)

  at oracle.forms.engine.Runform.processMessage (unknown Source)

  at oracle.forms.engine.Runform.processSet (unknown Source)

  at oracle.forms.engine.Runform.onMessageReal (unknown Source)

  at oracle.forms.engine.Runform.onMessage (unknown Source)

  at oracle.forms.engine.Runform.sendInitialMessage (unknown Source)

  at oracle.forms.engine.Runform.startRunform (unknown Source)

  at oracle.forms.engine.Main.createRunform (unknown Source)

  at oracle.forms.engine.Main.start (unknown Source)

  at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.start (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Hi Vinayak,

  If forms work in the local network, then you can exclude problem in Forms Server or Oracle Application as a whole actually.

  The question should be certain access privileges, and you will need to work with the VPN administrator.

  Please note:

  Cannot launch the forms in E-Business when you access via VPN: Formslauncher Notinited (Doc ID 471120.1)

  Hope that answers your question.

  Thank you &

  Better compliance

• How to increase the Idle time of the Oracle applications

  Dear Experts,
  
  I want to increase the duration of inactivity of my user account. If I leave the application idle for 5 minutes, application is automatically logged off the coast and clicking on any shape it gives me the message to log in again.
  Can someone tell me how to increase the idle time of the application, especially for a user account.
  
  Thank you

  PL post Details of the operating system, database and versions EBS.

  PL see this Doc MOS

  11i: how to solve the problem of time-out for forms in the Oracle Applications [ID 269884.1]

  HTH
  Srini

• Link to download the "Oracle Application Development" Incorrect Runtime

  In the JDeveloper/ADF download page.
  URL - http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html
  
  There is a link to download the 'Oracle Application Development Runtime install'
  (see the last link at the end of the page).
  This link is incorrect:
  He points to the same page:
  http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html
  
  Published by: Didier Laurent October 18, 2011 14:58

  It is now resolved. It may take a while to refresh.

• Newbie question for the Oracle application server

  Hi Master,
  a DBA I am interesting to broaden my skill with learning on the application server.
  I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
  Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
  
  Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
  WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
  
  Please enlighten me and thank you for your help
  
  Lie

  Question if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?

  Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.

  What book other than the documentation that you have found the right one for learning.

  Yet to find one, Oracle documentation was OK.

  Is it better to learn the Linux or Windows version?

  Both are very well, choose the operating system you know better.

  Best regards

  mseberg

  I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.

  Beware of pre-installation tasks

  Install the Oracle database
  Linux RCU (repository creation utility)

  Database

  Use an existing database. (And it worked)

  My test was divided into four main parts: (in this order)

  Installation of the regional coordination unit
  WebLogic Server Install
  Install JRocket
  Forms and reports Install

  According to me, it took me two or three times to do things. (or at least work)

  I found myself with these URLs in the end:

  Administration Server Console http://Host/console 7001
  Enterprise Manager Console http://Host/em 7002
  Enterprise Manager Agent http://Host/emd/main
  Oracle Forms http://Host/formes/frmservlet 9001
  Oracle reports http://Host/rapports/rwservlet 9002

  So far, I have only an addition to my Web Page:

  http://www.Visi.com/~mseberg/compile_forms_on_wl.html

  As always this work orders:

  ./opmnctl status
  

  I was able to add PHP after you apply the hotfix 9292625.

  Note of Oracle that I found useful

  854117.1

  Published by: mseberg on May 20, 2011 14:16

• Problem Manager of the Oracle Applications after cloning 11i

  Hi all
  
  After cloning ebs 11.5.10.2 from AIX 5.3 to AIX 6.1, I have problem with OAM.
  When I call OAM, after logging in, I get a blank page with Oracle icon in the upper left.
  It seems that everything works fine.
  
  Acces_log, error_log is not an error message.
  
  Really appreciate your help
  
  Thank you
  Boris

  I have another question.
  Is it posible to install IAS 10 g (10.1.2) on the same server where is installed EBS 11.5.10.2. OPERATING SYSTEM: AIX 6.1

  It is possible (provided that install you in the new ORACLE_HOMEs and you have sufficient resources on the server), but this is not recommended.

  Installation of Oracle Application Server 10 g with Oracle E-Business Suite Release 11i [ID 233436.1]
  Oracle Application Server 10g with Oracle E-Business Suite Release 11i troubleshooting [ID 295606.1]
  Oracle Application Server with Oracle E-Business Suite Release 11i FAQ [ID 186981.1]

  Thank you
  Hussein

• change the oracle application log

  Hello
  
  Can someone tell me how to change the oracle application logo

  Hello

  Please refer to this topic.

  Logo change?
  Re: Logo change?

  See also the old sons of similar disucssion.

  How to change the logo
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=how+to+change+logo&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• Apex can work without the oracle application server? How?

  My question is exactly what the title says.
  
  Apex can work without the Oracle application server?
  
  I heard that there need a webserver to work but not necessarily the oracle application server.
  Is this true?
  
  With ONLY apache installed apex can work on it?
  
  Thank you
  
  
  
  Don't forget to assign points to those who help you! (Mark the thread useful/correct)
  My home page
  
  Best regards
  
  Published by: Igor Carrasco on May 29, 2009 14:59
  
  Published by: Igor Carrasco on May 29, 2009 14:59

  Hello

  Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).

  http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm

  But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• The Oracle Applications login page throws an error message in R12

  Hi all

  Below, I see the error in the browser, when I try to access any Oracle Applications.

  In IE8

  "Could not generate the redirect URL. Exception: oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated. »

  In Firefox

  " 500 internal Server Error

  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. Please refer to the application for more details log. »

  EBS:R12.1.3

  DB: 11.2.0.3

  The DB and Applications are on different nodes.

  We are seeing this problem after encryption earpiece on the side DB is after the addition of some settings in the file 'sqlnet.ora', the problem is solved after the restoration of the old configuration (sqlnet.ora), but we would like to have this encryption on the side DB. If this is the case how?

  Settings in the file sqlnet.ora, the origin of the problem:

  SQLNET. CRYPTO_CHECKSUM_TYPES_SERVER = (MD5)

  SQLNET. ENCRYPTION_SERVER = required

  SQLNET. CRYPTO_SEED = "#"

  SQLNET. ENCRYPTION_TYPES_SERVER = (AES256)

  SQLNET. CRYPTO_CHECKSUM_SERVER = required

  Thank you

  Moore

  The question be resolved after application "Unable to log in to the control Grid database when ASO is configured on the database (ID of Doc 854293.1)"

  Thank you

• The Oracle Application 11i clonning error

  Hi all again, a new day a new error :)
  
  I have an error while clonning Oracle Application 11i on windows 2003 sp1 32-bit db 9.2.0.6.0
  
  When you run adcfgclone.pl dbTier it runs successfully uptill 70% at this stage it throws the below error
  
  ================================================================================================
  Beginning database layer apply - Wed Mar 7 01:49:19 2012
  Logfile located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
  RC-50004: Fatal: error in ApplyDatabase:
  Creating control files is not
  
  ERROR when executing apply...
  
  ERROR: Cannot run adclone.pl
  
  Check the log file.
  =================================================================================================
  
  When I check the ApplyDBTier_03070149.log
  
  I found this below
  
  ==============================================================================================================================================================================================================================
  Profile Phase jump
  Jump apply Phase
  Running StartDbLsnr...
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:50
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:50
  NPRO_hassan.cmd exit with status 0
  ECHO is turned off.
  The environment settings are...
  ECHO is turned off.
  ORACLE_HOME: d:\oracle\neproddb\9.2.0
  LOCAL: NPRO
  ORACLE_SID:
  PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
  LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
  ECHO is turned off.
  ECHO is turned off.
  The log information is written to
  'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt '.
  ECHO is turned off.
  ECHO is turned off.
  From process to listen NPRO...
  ECHO is turned off.
  
  LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:56
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCNPRO))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 2: no such file or directory
  Connection to (ADDRESS = (PROTOCOL = TCP (Port = 1534))(Host=hassan.com))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 61: unknown error
  
  LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:57
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  From tnslsnr: Please wait...
  
  TNSLSNR for 32-bit Windows: release 9.2.0.6.0 - Production
  NL-00280: creation of the journal of the d:\oracle\neproddb\9.2.0\network\log\npro.log stream error
  NL-00278: could not open the log file
  SNL-00016: snlfohd: error opening file
  32-bit Windows error: 13: permission denied
  
  Listening port could start. See the above error messages...
  
  addlnctl.cmd out with status 3
  
  .end std out.
  
  .end err out.
  
  Run CreateDB...
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: hassan
  sDbDomain: com
  sDbPort: 1534
  sDbSid: NPRO
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:51
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:51
  NPRO_hassan.cmd exit with status 0
  ECHO is turned off.
  The environment settings are...
  ECHO is turned off.
  ORACLE_HOME: d:\oracle\neproddb\9.2.0
  LOCAL: NPRO
  ORACLE_SID:
  PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
  LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
  ECHO is turned off.
  ECHO is turned off.
  The log information is written to
  'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt '.
  ECHO is turned off.
  ECHO is turned off.
  Creating the NPRO database control file...
  ECHO is turned off.
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  
  DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
  S/O-error: (OS 2) the system cannot find the file specified.
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  ORA-01012: not connected
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0641: "EXECUTE" requires the connection to the server
  ORA-01031: insufficient privileges
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  ECHO is turned off.
  Error checking...
  ECHO is turned off.
  The database was not created successfully. Stopping the instance...
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  adcrdb.cmd out with status 1
  
  .end std out.
  
  .end err out.
  
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: hassan
  sDbDomain: com
  sDbPort: 1534
  sDbSid: NPRO
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  RC-00118: an error occurred during the creation of database
  Asked by oracle.apps.ad.clone.ApplyDatabase
  
  
  StackTrace:
  java.lang.Exception: control file creation failed
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:474)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:319)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:295)
  to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
  the impossible (Native Method)
  at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
  at java.lang.Thread.run (unknown Source)
  
  ==============================================================================================================================================================================================================================
  
  Please help me with your advice
  
  Thank you
  Hassan

  Hi Hassan,.

  Is there a way to determine which application is locked this port that I tried again with a different port number and always the same result
  I don't have any other application or OracleAS application server running on the machine that supposedly can block a port.

  Do you have any product Oracle installed on the same computer? Please see the referenced above.

  You can try with a different port pool (i.e. 1 instead of 0) and see if you get the same error or not.

  In addition, see utility Portmon which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896644 for a list of ports that are used on the same machine.

  Thank you
  Hussein

• How to check if the discoverer is installed in the oracle application server?

  Hello
  
  I'm a developer, and I had an obligation to prepare a few reports of discoverer.
  
  However, I am new to Discoverer and as a result, I am facing problems during indexing of discoverer as Oracle Applications users.
  
  When I give the credentials, it asks me to choose a responsibility, and then he throws me error like "invalid username/password".
  
  applied patches according to metalink notes.
  
  but before that, I would like to know if I can really see whether or not the discoverer has been installed on the server of Oracle Applications.
  
  As my DBA also ignorant of the installation of discoverer, he also could not help me in this.
  
  How can we check if the discoverer has been installed on the server side and if not, how do install us it?
  
  Sorry for the stupid question.

  Hello

  The owner EUL is APPS and I might be able to connect to the Admin with this database user.

  I think you have an installation of database in mode EUL. You may not use APPS as the owner of the END user license. Therefore, you need to create a new mode of EUL requests in a separate schema.

  Is it possible that we can connect to Disco Admin/Desktop tool as a user of the database even though Disco is not installed on the server of Oracle Applications

  Yes, no problem. You only need server discoverer of applications if you want to use more or spectator.

  Rod West

• connection to the oracle application express using java and jdbc

  Hello!

  I am trying to build a java application using jbcd to connect to my Oracle Application Express DB but unable to connect actually using the following syntax:

  Private final static String DB = "myworkspacename";

  Private final static String RUTA public = "@apex.oracle.com:1521";

  private public static final String URL = "jdbc: Slim:" + RUTA + "/" + DB;

  private static final String DRIVER = "oracle.jdbc.OracleDriver";

  a USER private final static string = " " [email protected] "; "

  private final static String PASS = "MonMotpasse";

  and then I start the connection via:

  CONEX = DriverManager.getConnection(URL,USER,PASS);

  but finally I get the following error:

  IO error: the network adapter could not establish the connection

  any ideas on what goes wrong will be appreciated...

  Simple answer... YOU can't connect externally to the hosted instance of Oracle with a jdbc connection or sql developer/Toad.  Not allowed...

  If you need this capability, I would suggest downloading of Oracle 11 g XE and building you own database...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL