How to check if the discoverer is installed in the oracle application server?

Similar Questions

• Apex can work without the oracle application server? How?

  My question is exactly what the title says.
  
  Apex can work without the Oracle application server?
  
  I heard that there need a webserver to work but not necessarily the oracle application server.
  Is this true?
  
  With ONLY apache installed apex can work on it?
  
  Thank you
  
  
  
  Don't forget to assign points to those who help you! (Mark the thread useful/correct)
  My home page
  
  Best regards
  
  Published by: Igor Carrasco on May 29, 2009 14:59
  
  Published by: Igor Carrasco on May 29, 2009 14:59

  Hello

  Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).

  http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm

  But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Newbie question for the Oracle application server

  Hi Master,
  a DBA I am interesting to broaden my skill with learning on the application server.
  I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
  Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
  
  Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
  WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
  
  Please enlighten me and thank you for your help
  
  Lie

  Question if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?

  Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.

  What book other than the documentation that you have found the right one for learning.

  Yet to find one, Oracle documentation was OK.

  Is it better to learn the Linux or Windows version?

  Both are very well, choose the operating system you know better.

  Best regards

  mseberg

  I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.

  Beware of pre-installation tasks

  Install the Oracle database
  Linux RCU (repository creation utility)

  Database

  Use an existing database. (And it worked)

  My test was divided into four main parts: (in this order)

  Installation of the regional coordination unit
  WebLogic Server Install
  Install JRocket
  Forms and reports Install

  According to me, it took me two or three times to do things. (or at least work)

  I found myself with these URLs in the end:

  Administration Server Console http://Host/console 7001
  Enterprise Manager Console http://Host/em 7002
  Enterprise Manager Agent http://Host/emd/main
  Oracle Forms http://Host/formes/frmservlet 9001
  Oracle reports http://Host/rapports/rwservlet 9002

  So far, I have only an addition to my Web Page:

  http://www.Visi.com/~mseberg/compile_forms_on_wl.html

  As always this work orders:

  ./opmnctl status
  

  I was able to add PHP after you apply the hotfix 9292625.

  Note of Oracle that I found useful

  854117.1

  Published by: mseberg on May 20, 2011 14:16

• Deploy a war in the Oracle application server

  Hello
  
  We have a few Oracle discoverer running on the oracle application server and I would like to deploy a war to the service file.
  Can someone tell me if its possible to do?
  Should I just drop the war in the deployment of the server folder?
  
  Thank you
  KK

  Wrong forum.

  Move the thread (close and re-post) to each of discoverer
  or somewhere in http://forums.oracle.com/forums/category.jspa?categoryID=193 (probably Oracle ACE - general forum).

• Can not connect to the Oracle application server management page

  Hello
  
  I installed Oracle Application server 10g (10.1.2) on Solaris server.
  
  I can connect to host the server Apps page
  
  http:// < xxxx >: 7777 / - it works.
  
  However, I am not able to connect to the control page
  There is a link to it on the right side of the home page.
  "
  To manage and monitor Oracle Application Server, connect to Oracle Enterprise Manager 10 g Application Server Control:
  "username: ias_admin"
  
  http:// < xxxx >: 1156 / - it don't work -
  
  What could be the problem?
  
  Thank you
  Rane
  
  Published by: dgrane on November 21, 2008 16:29

  Default password for user 'oc4jadmin! I'm not aware of this user in 10.1.2.x, maybe there's one of OC4J side but not otherwise. If you are looking for credentials to connect to OracleAS controls (EM), the username is "ias_admin" and password is the one you specified during the installation. There is no default password. Refer to this:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b13995/tools.htm#i1075023

  Thank you
  Shail

• How to check if the menuitem application has already added to the application menu?

  Hi all

  I want to insert some menutime at the request of RIM, for example,

  I have create a new menuitem Application named customizedMenuitem and add it to the request Message RIM.

  Since then, each time when my application is started, it will add again.

  So I want to check if it has already been added, if so, ignore to add it. If this isn't the case, application adds one more time.

  I called removemenuitem before system.exit (0) when quiting my request, however, it doesn't seem to work.

  That's why I check menuitem before I add.

  Source code like this,

  Constructor()

  {

  Super();

  If (the _appMenuitem is not added to the RIM Application) {}

  create a new menuitem application

  ApplicationMenuItemRepostory.addMenuItem (int, applicationmenuitem)

  }

  }

  Any word would be much appreciated!

  Thanks in advance!

  The most common way to deal with this is to store a value in the store of Runtime.  Your application can save a value when it adds the ApplicationMenuItem, and then check to see if it is there when it is run a second time.

  The Runtime store is erased when the BlackBerry is reset, which would coincide with the ApplicationMenuItem being deleted.

• How to analyze by using URL parameter in the oracle application server?

  Hi all
  
  I have a problem.
  
  I've done the configuration in [app_server] \formsweb.cfg
  
  [ABC]
  archive_jini = f90all_jinit.jar, new_Version.jar
  Width = 750
  height = 700
  separateFrame = true
  splashScreen = no
  lookAndFeel = oracle
  colorScheme = Red
  form = ABC01.fmx
  envFile = ABC.env
  
  the form ABC01.fmx have a 2, JobID and RUNID parameter
  
  and I call the form like this
  
  
  
  http://190.180.23.12:7778/forms90/f90servlet? config = ABC? JobID = J001 & RUNID = 77
  
  but I can't launch the form because there are 2 parameters.
  
  If I remove the parameter, the form can run.
  
  is it possible to analyze the parameter in the URL?
  
  Thank you very much for your sharing.
  
  
  Kind regards
  Iwan

  Hello!
  Please try:

  http://190.180.23.12:7778/forms90/f90servlet?config=ABC&otherparams=JobID=J001+RUNID=77 
  

  Concerning

• Log4j logging on the Oracle application server.

  First of all, don't know where to post this, but this seems to be the most active forum in general.
  And the issue of cuts in good number of technologies/products.
  
  For common.logging-based logging, the IAS has the ability to dynamically adjust the loglevel during execution.
  This can be done under the administration of container and the logging configuration. All the registered papers will display. Newspapers at least all registrants based on common logging. But those of log4J are not displayed.
  
  He is a brilliant feature for debugging problems in a production environment.
  
  However, when you use log4j seems not possible more.
  
  I do not understand why, and no one knows how to fix this?
  
  Anton

  Hi Anton

  Maybe this can help...
  "Configuration and using Jakarta log4j.
  «+ The following sections cover the considerations for use of Jakarta log4j in an OC4J environment... +»
  http://download.Oracle.com/docs/CD/B32110_01/Web.1013/b28952/opensrc.htm#sthref174

  success
  Jan Vervecken

• Failure research Oracle Application Server when installing EM grid control

  Not to seek the Oracle Application Server during the installation of 10.2.0.3 on Windows XP EM grid control.
  I uninstalled the old database from Oracle 10 g and I have also remove all oracle related services and programs the services.msc and unregistry all related services of the registry Hkey. Now I install EM Grid Control with a new database.
  I don't have any MetaLink account now.
  Journal of G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands massage

  Command: oracle.sysman.emcp.agent.AgentPlugIn 

  The journal of C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43 messages...

  Starting Agent
  
  Command = oracle.sysman.emcp.agent.AgentPlugIn has failed 
  Exception : java.lang.Exception: 
  Management Agent Configuration Assistant is failed. 
  The following failed messages are recorded:
  
  configureAgent: Search on a non-RAC system:  Fail to search Oracle Application Server.
  
  Info: Configuration Assistant "Agent Configuration Assistant" is fail.
  -----------------------------------------------------------------------------
  *** Starting OUICA ***
  
  Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
  Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\
          configToolFailedCommands file, backing it up
  Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed
          Commands.bak
  Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry 
          Configuration Assistant. 
  ...

  Thank you for the help
  
  Published by: junez on December 27, 2009 10:17

  Please visit the following link. I think that is the key question.

  http://krsethur.WordPress.com/2006/06/13/uninstalling-Oracle-10G-manually-from-Windows-XP/

• capture the data of Internet users access to oracle application server

  How to capture the details (for example, user, date & time of session id, ip address, etc) of all users (in home, vpn access, etc.) to access the oracle application server.

  Hello

  If you use $ORACLE_HOME/webcache/newspapers you can view access logs because all traffic passes through...

  concerning

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• How to check if XML Editor is installed

  Hello
  on 8.49 (FSCM 9) how quickly check if the XML Editor is installed?
  
  
  Thank you.

  XML editor belongs to PeopleTools, so it is always installed.

  If you mean Office XML Editor, which can be found via the windows start menu.

• How to find if the Oracle client is installed or the server is installed.

  Hello
  
  How to find if the Oracle client software is installed or server software is installed on a linux machine.
  
  Thank you.

  Check the output of 'opatch lsinventory.

  If its database, the output would be as follows.

  Installed products of higher level (1):

  Oracle Database 10g 10.2.0.1.0

  For the customer, it would be

  Installed products of higher level (1):

  Client Oracle 11.2.0.1.0

• R12.1.1 staging is complete! How to check if the scene is good

  Hi Gurusl,
  
  I finished the staging R12.1.1 for Hp unix B.11.31. I want to know how to check if the scene is good for installation or if it is corrupt. Is there a metalink note or the script from where we can check it out. your help will be very appreciated. Thanks in advance
  
  Kind regards

  Hello

  Please refer to (Note: 802195,1 - checksums MD5 for R12.1.1 Quick Install Media).

  Kind regards
  Hussein

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.