2811 - problem with the «failed to load the flash» start

Similar Questions

• Problem with the Apple start and stop music

  s everyone having problems with Apple music constantly stop and start today?  It is on my PC and iPhone.

  What is your internet connection?

  Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

  See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

  https://www.Apple.com/support/SystemStatus/

• Problems with the slow start

  When I click on internet on my desktop xp button it takes 10 minutes to load my homepage.  Can someone help someideas to make it faster the load

  You emptied Temp--------history files?  Try a cleaning disc to see if it will speed things up.  If not, someone else will have more suggestions.

  (1) departure
  (2) all programs
  (3) accessories
  (4) system tools
  (5) cleaning disc

  If you have not defragged in a while, after having done the disk cleanup, follow steps 1-4, then select Disk Defragmenter .

  Not knowing your computer habits, I would recommend that after you run Disk Cleanup and Disk Defragmenter, turn off the computer for a few minutes and then restart.

  Rosie Please post back with the results on this matter or if you need more help. Dell OptiPlex GX260, 2.40 GHZ, Pentium 4, 80G HD, Windows XP Pro (SP3), IE8, AVG, Spybot S & D, SpywareBlaster 4.2, 4.0 OnlineArmor, MalwareBytes'

• Problem with the Flash Player and safely remove Hardware icon

  I'm a casual pc user, so it's not very technical!

  I bought a new computer from Dell Studio One desktop in July.  I use it once or twice a day in general.  When I use it, I usually insert a flash drive so that I can save my documents, etc.  I also use the safely remove hardware option before removing the flash.

  Here's the problem: these days, the little 'remove hardware safely' remained in my taskbar with the green check mark on that.  When I click on it, it shows an option to safely remove drive F.  Until this problem, when I want to insert flash, Windows would label it drive F.  Now, all of a sudden, when I insert the flash, it becomes the G.  And I have this ghost f.

  It's not a huge deal, I don't know, but I do not understand what has happened.  Furthermore, I use Vista, and when finally, I guessed my way, I found the Code 47 as the cause of the problem.  Of course, Code 47 indicates that I left something trendy, but obviously, I have not.

  Any help out there?

  Hello

  I suggest check in disk for the driver letters which are present management and remove no matter what additional driver letter (e.g. f :/) and check if the problem is resolved.) Follow the steps mentioned in the article below.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Flash drive on the computer.

  My folders on my flash drives appear flash drives, however, show have some use. When used on another computer, they are perfect. What could be the problem?

  Hello

  Have you tried another flash drive in this computer?

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then allows you to refresh the USB stack:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have some problems with the Flash cs6 work

  I have a problem with my game when I created it using adobe flash cs6

  When the duck strikes the screen, from right to left as it shows

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Duck / ducksmove)

  at flash.utils::Timer/_timerDispatch()

  at flash.utils::Timer/tick()

  This is the code so please help check that does not

  package {}

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.events.MouseEvent;

  Duck/public class extends MovieClip {}

  var moveDuck:Timer = new Timer (10);

  var speedX:Number;

  public void Duck() {}

  this.addEventListener (MouseEvent.CLICK, KillDuck);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  moveDuck.start ();

  speedX = 10;

  }

  function ducksmove(evt:TimerEvent):void

  {

  This.x = speedX;

  If (this.x < = 0)

  {

  moveDuck.stop ();

  moveDuck.removeEventListener (TimerEvent.TIMER, ducksmove);

  this.parent.removeChild (this);

  }

  }

  function KillDuck(evt:MouseEvent):void

  {

  var p:MovieClip = this.parent as MovieClip;

  p.setScore ();

  p.UpdateCount ();

  this.removeEventListener (MouseEvent.CLICK, KillDuck);

  this.parent.removeChild (this);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  }

  }

  }

  You seem to be trying to delete the same object twice, in the KillDuck function, then in the ducksmove function.  If it is removed already you can not try to remove it again because it is no longer in the display list.

• What it the problem with the Flash?

  I had nothing other than a nightmare with the use of the voice with Flash. It very well when I record it. It very well when I'm working with it in Flash. Whenever I export the sound of winds reaching all crushed. What I am doing wrong?

  There are two places where the compression can be applied to sounds that are imported into Flash.

  1. Select a sound in the library and right-click on it. Select Properties... option. When this window opens, you will see options to set the type and the amount of compression for the individual audio file.

  2. in the publication settings window, make sure that 'His replacement settings' option is unchecked.

  You should hear the sounds in the finished the same .swf as you do when playing the timeline.

• Problem with the drive start satellite C50D-B-120

  I've recently updated to windows. My laptop computer was really slow lately, but today it is lit with impossible for the reader to boot disk
  my laptop is still under warranty

  I don't know what happened

  In the worst cases, your HARD drive is dead and you will have to replace it.
  But no doubt the HARD drive is still OK and you only need to reinstall the system.

  Go to BIOS (F2) and check if the HARD drive is recognized by the BIOS.
  It should appear on the first page of the BIOS.

  If it is not listed, the HARD disk needs to be replaced.
  If it does not appear, reinstall the system using the Toshiba recovery media.

  If you have not created this recovery media in the past, you always have an option to order this missing disk recovery.
  http://backupmedia.Toshiba.EU/

• problems with the pc starts

  When you try to start my pc after having stop that I get a window WARNING SYSTEM BATTERY IS LOW PRESS F1 TO CONTINUE or F2 TO enter SET UP can that I get rid of this window pleas help?

  This message means that the CMOS battery on the motherboard is low and must be replaced if the computer will remember its configuration data while off.  Check your manual for the motherboard or system for the location of the battery.  These batteries are usually pretty cheap and fairly easy to replace with some care.

  "roy perrin" wrote in the new message: * e-mail address is removed from the privacy... *

  When you try to start my pc after having stop that I get a window WARNING SYSTEM BATTERY IS LOW PRESS F1 TO CONTINUE or F2 TO enter SET UP can that I get rid of this window pleas help?

• Problems with the flash drive and ReadyBoost

  I just bought a fairly expensive 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Monday, January 5, 2015, 17:34:53 + 0000, TheJimObasa wrote:

  I just bought an expensive ther 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Not an answer to your question, but let me point out the following:
  unless you have very little RAM on your computer, ReadyBoost is
  useless and will do nothing to improve your performance. Use of the
  drive for something else.

• I'm having a problem with the getting started with Dreamweaver. Help!

  [email protected]

  My question is: if I brought the Creative Suite 2 Premium with Dreamweaver, do I have to buy a new (s), or get an update.

  Released in 2005, CS2 is no longer supported.  Adobe is giving free copies of CS2 now away because it does not work on most modern computers.

  Join the creative cloud and download CS6 DW or CC.

  http://www.Adobe.com/products/creativecloud/buying-guide.html

  Nancy O.

• Problem with the Flash Sites...

  
  
  I installed Flash CS3 and when I go to sites having active Flash, they make me that Flash 8 is not installed. I followed the link from adobe and reinstall Flash player (have done several times). Install Flash and the film works very well. But then when I go to the site in question, all of this happen.
  
  I thought it might have been the QuickTime Flash settings track, but just tried in vain. I think it could be related to application for flash files mappings, you try to run Flash CS3 instead of the drive, but that's just a guess.
  
  Anyone see this? I tried a few searches on google and nothing of value.

  Quote:
  Posted by: photographyvoice.com
  

  I installed Flash CS3 and when I go to sites having active Flash, they make me that Flash 8 is not installed. I followed the link from adobe and reinstall Flash player (have done several times). Install Flash and the film works very well. But then when I go to the site in question, all of this happen.

  I thought it might have been the QuickTime Flash settings track, but just tried in vain. I think it could be related to application for flash files mappings, you try to run Flash CS3 instead of the drive, but that's just a guess.

  Anyone see this? I tried a few searches on google and nothing of value.

  SOLVED!

  I checked my list of installed programs and somehow had installed Flash 9 in triplicate. A Flash 9 ActiveX and a Flash 9 Plugin - was the third is a duplicate. In any case, I closed IE and uninstalled all the. Then I restarted IE, went to Adobe.com/flash and installed the plugin again. And voila! He now works.

• Problems with the extension manager for 2015 of CC (was: Extension Manager fails to load products)

  Can Hi anyone help me understand what could be the problem with my extensions Manager. I just installed or rather updated all my apps, including extensions through the CC Manager Manager. After updated all my applications, I think I lost all my extensions on Photoshop CC 2015. So I tried to reinstall the extensions Manager and update it, but the problem seems to be it seems to take on Photoshop, which makes it difficult for me to install new extensions. Is there something escapes me?

  Hi Didier,.

  See a related discussion on the same topic: Re: Extensions CC2015 gone

  I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

  See Adobe Exchange for official communication on the extensions Manager.

  Thank you

  Preran

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek