Problem with the Flash Sites...

Similar Questions

• Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Hello

  Please download from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.

  Let me know in the case where you are facing any problems during the download, if you get any error try another browser.

  Thank you

  Priyank

• Problem with the Flash Player and safely remove Hardware icon

  I'm a casual pc user, so it's not very technical!

  I bought a new computer from Dell Studio One desktop in July.  I use it once or twice a day in general.  When I use it, I usually insert a flash drive so that I can save my documents, etc.  I also use the safely remove hardware option before removing the flash.

  Here's the problem: these days, the little 'remove hardware safely' remained in my taskbar with the green check mark on that.  When I click on it, it shows an option to safely remove drive F.  Until this problem, when I want to insert flash, Windows would label it drive F.  Now, all of a sudden, when I insert the flash, it becomes the G.  And I have this ghost f.

  It's not a huge deal, I don't know, but I do not understand what has happened.  Furthermore, I use Vista, and when finally, I guessed my way, I found the Code 47 as the cause of the problem.  Of course, Code 47 indicates that I left something trendy, but obviously, I have not.

  Any help out there?

  Hello

  I suggest check in disk for the driver letters which are present management and remove no matter what additional driver letter (e.g. f :/) and check if the problem is resolved.) Follow the steps mentioned in the article below.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Flash drive on the computer.

  My folders on my flash drives appear flash drives, however, show have some use. When used on another computer, they are perfect. What could be the problem?

  Hello

  Have you tried another flash drive in this computer?

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then allows you to refresh the USB stack:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have some problems with the Flash cs6 work

  I have a problem with my game when I created it using adobe flash cs6

  When the duck strikes the screen, from right to left as it shows

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Duck / ducksmove)

  at flash.utils::Timer/_timerDispatch()

  at flash.utils::Timer/tick()

  This is the code so please help check that does not

  package {}

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.events.MouseEvent;

  Duck/public class extends MovieClip {}

  var moveDuck:Timer = new Timer (10);

  var speedX:Number;

  public void Duck() {}

  this.addEventListener (MouseEvent.CLICK, KillDuck);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  moveDuck.start ();

  speedX = 10;

  }

  function ducksmove(evt:TimerEvent):void

  {

  This.x = speedX;

  If (this.x < = 0)

  {

  moveDuck.stop ();

  moveDuck.removeEventListener (TimerEvent.TIMER, ducksmove);

  this.parent.removeChild (this);

  }

  }

  function KillDuck(evt:MouseEvent):void

  {

  var p:MovieClip = this.parent as MovieClip;

  p.setScore ();

  p.UpdateCount ();

  this.removeEventListener (MouseEvent.CLICK, KillDuck);

  this.parent.removeChild (this);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  }

  }

  }

  You seem to be trying to delete the same object twice, in the KillDuck function, then in the ducksmove function.  If it is removed already you can not try to remove it again because it is no longer in the display list.

• a text box is every moment that I edited dynamically scroll bar upward. I know that's not a problem with the Web site because she works with other browsers

  There is a problem with scrolling of a text box bar. whenever it is changed dynamically developing area moves upward instead to keep the focus in the area of the new inserted text. even if I move it down to hand it back again.

  OK, I have fixed the code in my program. When I finished the editing, I use this code in javascript.
  document.getElementById("chatMainTxt").scrollTop = document.getElementById ("chatMainTxt") .scrollHeight;

• Problem with the VPN site to site for the two cisco asa 5505

  Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.

  Cisco Config asa1

  interface Ethernet0/0
  switchport access vlan 1
  !
  interface Ethernet0/1
  switchport access vlan 2
  !
  interface Vlan1
  nameif outside
  security-level 0
  IP address 172.xxx.xx.4 255.255.240.0
  !
  interface Vlan2
  nameif inside
  security-level 100
  IP 192.168.60.2 255.255.255.0
  !
  passive FTP mode
  network of the Lan_Outside object
  192.168.60.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  network of the NETWORK_OBJ_192.168.60.0_24 object
  192.168.60.0 subnet 255.255.255.0
  object-group Protocol DM_INLINE_PROTOCOL_1
  ip protocol object
  icmp protocol object
  object-group Protocol DM_INLINE_PROTOCOL_2
  ip protocol object
  icmp protocol object
  object-group Protocol DM_INLINE_PROTOCOL_3
  ip protocol object
  icmp protocol object
  Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
  Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
  Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
  Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
  network of the Lan_Outside object
  NAT (inside, outside) interface dynamic dns
  Access-group Outside_access_in in interface outside
  Inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  AAA authentication http LOCAL console
  Enable http server
  http 192.168.60.0 255.255.255.0 inside
  http 96.xx.xx.222 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto Outside_map 1 corresponds to the address Outside_cryptomap
  card crypto Outside_map 1 set peer 96.88.75.222
  card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  Outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  inside access management

  dhcpd address 192.168.60.50 - 192.168.60.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  AnyConnect essentials
  internal GroupPolicy_96.xx.xx.222 group strategy
  attributes of Group Policy GroupPolicy_96.xx.xx.222
  VPN-tunnel-Protocol ikev1, ikev2
  username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
  tunnel-group 96.xx.xx.222 type ipsec-l2l
  tunnel-group 96.xx.xx.222 General-attributes
  Group - default policy - GroupPolicy_96.xx.xx.222
  96.XX.XX.222 group of tunnel ipsec-attributes
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the icmp error

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Cisco ASA 2 config

  interface Ethernet0/0
  switchport access vlan 1
  !
  interface Ethernet0/1
  switchport access vlan 2
  !
  interface Vlan1
  nameif outside
  security-level 0
  IP address 96.xx.xx.222 255.255.255.248
  !
  interface Vlan2
  nameif inside
  security-level 100
  IP 192.168.1.254 255.255.255.0
  !
  passive FTP mode
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network of the Lan_Outside object
  subnet 192.168.1.0 255.255.255.0
  network of the NETWORK_OBJ_192.168.60.0_24 object
  192.168.60.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  object-group Protocol DM_INLINE_PROTOCOL_1
  ip protocol object
  icmp protocol object
  object-group Protocol DM_INLINE_PROTOCOL_2
  ip protocol object
  icmp protocol object
  object-group Protocol DM_INLINE_PROTOCOL_3
  ip protocol object
  icmp protocol object
  object-group Protocol DM_INLINE_PROTOCOL_4
  ip protocol object
  icmp protocol object
  Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
  Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
  Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
  Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
  !
  network of the Lan_Outside object
  dynamic NAT (all, outside) interface
  Access-group Outside_access_in in interface outside
  Inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  AAA authentication http LOCAL console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 172.xxx.xx.4 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto Outside_map 1 corresponds to the address Outside_cryptomap
  card crypto Outside_map 1 set peer 172.110.74.4
  card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  Outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0

  dhcpd address 192.168.1.50 - 192.168.1.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  AnyConnect essentials
  internal GroupPolicy_172.xxx.xx.4 group strategy
  attributes of Group Policy GroupPolicy_172.xxx.xx.4
  L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
  username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
  tunnel-group 172.xxx.xx.4 type ipsec-l2l
  tunnel-group 172.xxx.xx.4 General-attributes
  Group - default policy - GroupPolicy_172.xxx.xx.4
  172.xxx.XX.4 group of tunnel ipsec-attributes
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  inspect the icmp error
  inspect the http

  For IKEv2 configuration: (example config, you can change to encryption, group,...)

  -You must add the declaration of exemption nat (see previous answer).

  -set your encryption domain ACLs:

  access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip

  -Set the Phase 1:

  Crypto ikev2 allow outside
  IKEv2 crypto policy 10
  3des encryption
  the sha md5 integrity
  Group 5
  FRP sha
  second life 86400

  -Set the Phase 2:

  Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
  Esp aes encryption protocol
  Esp integrity sha-1 protocol

  -set the Group of tunnel

  tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
  REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
  IKEv2 authentication remote pre-shared-key cisco123

  
  IKEv2 authentication local pre-shared-key cisco123

  -Define the encryption card

  address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
  card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
  card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
  CRYPTOMAP interface card crypto outside
  crypto isakmp identity address

  On your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)

  Thank you

• What it the problem with the Flash?

  I had nothing other than a nightmare with the use of the voice with Flash. It very well when I record it. It very well when I'm working with it in Flash. Whenever I export the sound of winds reaching all crushed. What I am doing wrong?

  There are two places where the compression can be applied to sounds that are imported into Flash.

  1. Select a sound in the library and right-click on it. Select Properties... option. When this window opens, you will see options to set the type and the amount of compression for the individual audio file.

  2. in the publication settings window, make sure that 'His replacement settings' option is unchecked.

  You should hear the sounds in the finished the same .swf as you do when playing the timeline.

• I have a problem with the Web site of firefox in IE7

  I have a site in which I displays a warning message if the user is using IE6, IE7 or IE8 and a link to upgrade the browser old and dead again.

  And I gave the link to upgrade to mozilla.com. But when I take the mozilla site in IE7, there is no visible download button. Please check.

  What ever is visible or not at least DOWNLOAD button must be made visible to users of Internet Explorer. Please let them upgrade the browser dead.

  You can send them to this web page:

  • http://www.Mozilla.com/en-us/Firefox/all.html

• Problems with the new site

  I just uploaded a new site built with model DW CS3 to Network Hosting Solutions. There are two questions. The site will Flash in Firefox. The header image is missing (text Alt's view). I checked the compatibility of the site and found no problem.
  
  www.Fastlane.bz
  
  Any advice will be greatly appreciated.
  
  Patti

  Just read this forum a bit more... in case someone else has this problem... it is the CSS... the blink has been checked on one of the styles. I unchecked and it works!

  Thanks forum!

• is anyone having problems with the debenhams site when accessed from an iPad?

  I can't select sizes, etc. When I go to debenhams site from my iPad 2. In addition, items disappear from my basket once they have been added & new items disappear from the "saved" so box. I was wondering if anyone else may be faced with a similar problem. Any suggestions to solve this would be great, thank you all!

  A couple of things you can try:

  Clear the cache for Safari (Settings - Safari - clear story and Web site data)

  Install app Debenhams

• I just formatted my computer and I went to be updated and used to leave I get a message saying problems with the web site

  How do i update my computer if he returns constantly with this economics of site there is a problem it is an ode to mistake we continue to last nite

  0x8024400a I use it please anyone advise.  If I go to the new UPDATE ON THE PAGE qY I AGREEMENT of AGREEMENT NOTHING is HAPPENING AS I DO I hae family xp for windows

  Ty very much. That's what was wrong my friend he Tea on my p and improved to served 3 and was able to update ty much

• Problems with the entire site under IE

  Hi, I'm setting up a new website for my business and have used the Muse. When exported to HTML format and downloaded using Cute FTP to my domain everything looks good in Firefox and Chrome, but not in IE11.

  When displaying in IE my web fonts don't work, my panels with tabs does not work, none of my muse themes work inclusion, Twitter account, search bar, card, activator of 100%. The worst thing is I have launch in 2 weeks, but can't understand why none of this does not work. I thought that muse rendered for all browsers? Can anyone tell if they have had this problem before? I'm not a massive coder, that's why I use muse.

  Here is the test page for Web site.

  Kentec Electronics Ltd.: Contact

  Thanks in advance.

  Emma

  Hi, thanks for your help. I mentioned it to my computer it did not work, and he said to check my PC didn't need update of which he did and solved my problems.

  Regarding the Twitter account, I used the widget of muse - themes.com.

  Thank you

• Problems with the flash drive and ReadyBoost

  I just bought a fairly expensive 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Monday, January 5, 2015, 17:34:53 + 0000, TheJimObasa wrote:

  I just bought an expensive ther 32 GB SanDisc Extreme 3.0 USB Flash Drive for use with my Windows 7 Professional 64 Bit...

  After formatting the new flash drive and tried to assign to ReadyBoost, a dialog box pop on the screen informing me that "this device cannot be used for ReadyBoost.  The unit doesn't have the performance characteristics required.

  If Windows 7 does not have a top of the range flash drive as a device for ReadyBoost, what "performance" requires

  Not an answer to your question, but let me point out the following:
  unless you have very little RAM on your computer, ReadyBoost is
  useless and will do nothing to improve your performance. Use of the
  drive for something else.

• Problems with the reactive site in Muse (was: comments please.)

  I just finished my first Muse site & downloaded successfully on Business Catalyst.

  It's just a hobby of test of a site, husband of my boss created in WordPress.

  I wanted to see if I could re-create it with Muse.

  3 questions I have and that you need assistance, are: (links below)

  1. He is unresponsive and appears correctly on my iPhone? Any thoughts?

  2. the cursor of the hero on the homepage is not identical to the original, I could not go across the width of the site. Although I could, but then when it is resized, the images obtained more short & wide Cup top and bottom.

  3. the Menu suppliers should not bind to the empty master page, only the submenus should link to pages.

  Any thoughts on these issues?

  If not, what is your overall opinion of how I did? Your comments please?

  Thank you! Bob

  My Muse site: home

  The original live WordPress site: Melbourne Florida Home Show - city of Melbourne Home Show

  1: did you create as a sensitive site and set all different breakpoints?

  2: see answer #1

  3: on your drawing, select the blank page and click right and in the options menu, select "Include Page without hyperlink"