Problems with the slow start

Similar Questions

• Problem with the Apple start and stop music

  s everyone having problems with Apple music constantly stop and start today?  It is on my PC and iPhone.

  What is your internet connection?

  Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

  See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

  https://www.Apple.com/support/SystemStatus/

• Satellite U400-177 with the slow start of vista

  About two weeks ago, I bought a computer laptop satellite U400-177, with an operating system installed vista Home premium. Since the first moment, when I turn on the machine, the operating system startup is desperately slow! It takes about five minutes for the laptop end the beginning to start working! Is there something I can do to compensate for the departure faster?

  Thank you!

  Hello

  I m U400 owner.
  I must say that a lot of apps is preinstalled by Toshiba and this could affect the startup time

  First of all, you must either update the Tempro tool or you should remove it (if you need t n).
  Second, you must start the msconfig and in the Startup tab you could disable some not important background processes.
  I put t know what is important to you and you want to use applications.

  If you n t know the meaning of some process then google for that in most cases, you could get a few details

• Problem with the drive start satellite C50D-B-120

  I've recently updated to windows. My laptop computer was really slow lately, but today it is lit with impossible for the reader to boot disk
  my laptop is still under warranty

  I don't know what happened

  In the worst cases, your HARD drive is dead and you will have to replace it.
  But no doubt the HARD drive is still OK and you only need to reinstall the system.

  Go to BIOS (F2) and check if the HARD drive is recognized by the BIOS.
  It should appear on the first page of the BIOS.

  If it is not listed, the HARD disk needs to be replaced.
  If it does not appear, reinstall the system using the Toshiba recovery media.

  If you have not created this recovery media in the past, you always have an option to order this missing disk recovery.
  http://backupmedia.Toshiba.EU/

• problems with the pc starts

  When you try to start my pc after having stop that I get a window WARNING SYSTEM BATTERY IS LOW PRESS F1 TO CONTINUE or F2 TO enter SET UP can that I get rid of this window pleas help?

  This message means that the CMOS battery on the motherboard is low and must be replaced if the computer will remember its configuration data while off.  Check your manual for the motherboard or system for the location of the battery.  These batteries are usually pretty cheap and fairly easy to replace with some care.

  "roy perrin" wrote in the new message: * e-mail address is removed from the privacy... *

  When you try to start my pc after having stop that I get a window WARNING SYSTEM BATTERY IS LOW PRESS F1 TO CONTINUE or F2 TO enter SET UP can that I get rid of this window pleas help?

• I'm having a problem with the getting started with Dreamweaver. Help!

  [email protected]

  My question is: if I brought the Creative Suite 2 Premium with Dreamweaver, do I have to buy a new (s), or get an update.

  Released in 2005, CS2 is no longer supported.  Adobe is giving free copies of CS2 now away because it does not work on most modern computers.

  Join the creative cloud and download CS6 DW or CC.

  http://www.Adobe.com/products/creativecloud/buying-guide.html

  Nancy O.

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Satellite U400 - 10L: problem with the start-up & reboot

  Hello

  Well I don't like much about the touchpad overheating but I have a problem. When I restart this mobo instead of activate after a reboot it stays black without any reaction only lower diods, dvd - rom and the display flashes (can't hear fan or hard drive).

  If I press the power button / stop all the icons of diod (ac, pwr, hdd bat) shine up just for a second and new (can't hear the fan hard drive or cpu) computer does not turn on. All this happened only when AC cable is connected to the power if I use just notebook power source battery boots and restart without problems.

  If I remove battery completely from the laptop, once more, I get the same symptoms (cannot start). And the saddest part of this story is the fact that I got brand new Toshiba U400 10 L to the seller and got a new.
  It has the exact same problem.
  As you all probably understand im crazy because in the last two days, I tried really everything, including the BIOS without flashing and the success.

  Well im not sure whats going on, but this could be the problem with the battery or a bad contact?
  Any ideas?
  I would return it back?

  Thanks much for the reply

  Hello

  The behavior of your laptop is really strange and I suppose it might be bound only to a hardware problem.

  A friend of mine couldn't t start the laptop connected to the AC adapter the power adapter is faulty. It was only possible to start Notepad using the battery, and only if the battery was not completely empty.

  I put t know if your AC adapter failures but the authorized service provider should definitely check out the laptop and accessory for laptop (AC adapter).

  Then call the ASP in your country and ask the technicians for later handling.

  Greetings

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Photoshop is slow... I have no problem with the computer (windows 8) mine

  Photoshop C5 is a bit slow... no problem with the computer (windows 8.0)

  Hi maxarcitecture,

  Suggest you to reset the settings of Photoshop and then check

  Using Photoshop | Preferences

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.