2950 server and components NV
Hello, newbe here
I have a Dell PowerEdge 2950 I need to erase the three areas of NV Ram, I downloaded the declaration of volatility, and these are the sections:
1. Server Firmware, built-in optional ROMB) memory
Check the pages of Dell, I see a NVRAM_CLR jumper, remove this jumper, boot and who should do it?
2 Server (Embedded) storage controller Cache, RAM memory volatile Battery Backed
Check pages Dell, to clear the cache of the storage controller, remove the RAM controller chip and battery. Starting the server, CTRL-M to SCSI (3 PERC, PERC 4) controllers or CTRL-R to SATA/SAS controllers (PERC 5, new controllers and PERC 6) according to the installed controller, wait five minutes in the CTRL menu to enable the content of the purge cache, restart the controller BIOS. Dell recommends re-flashing and BIOS / Firmware in the server.
3. memory video Server DDR SDRAM
Can't find anything on this
He is the current wording of the SOV web site, can someone confirm the steps to clear these 3 boxes of NV RAM?
Thank you, Bruce
1. the Firmware (built-in optional ROMB) memory server
Details
Size:
NVRAM 32KB, 4MB Flash
Type: [e.g. PROM Flash, EEPROM]:
NVRAM, Flash
Can programs user or operating system to write data on it during normal operation?
NVRAM data can be changed during the
normal operation
Goal? [e.g. code for startup]
The Firmware data & configuration of controller
How are data entry in this memory?
Loading flash memory requires a seller
Loader and the firmware file provided
program which is executed by starting at the top
the system from a diskette or a based OS
executable containing the
the firmware file and the loader. System
charge with arbitrary data in firmware
memory would not work.
How is this memory write protected?
The flash memory chip is software write protected
Remarks
2 Server (Embedded) storage controller Memory Cache (if not present/applicable, N/A will appear under details)
Details
Size:
256 MB
Type: [e.g. PROM Flash, EEPROM]:
Battery Backed volatile RAM
Can programs user or operating system to write data on it during normal operation?
Yes
Goal? [e.g. code for startup]
Caching of data
How are data entry in this memory?
Normal operation
How is this memory write protected?
NO.
Remarks
3. memory video server
Details
Size:
16 MB
Type: [e.g. PROM Flash, EEPROM]:
DDR SDRAM
Can programs user or operating system to write data on it during normal operation?
Yes
Goal? [e.g. code for startup]
Graphics buffer
How are data entry in this memory?
Normal operation
How is this memory write protected?
NO.
Remarks
Why you "have to" clear all these? This is totally useless or is a sign of other issues.
1. this I can see - it has valid uses. Set the jumper, CLR, and then start the system - you will see a message that the NVRAM jumper is installed. At this point, you can turn off the power, unplug and put the rider in its original location.
2. Yes, there may be rare cases where you will need to do this, but only if the system has no BONES and even in this case, it is more likely due to bad memory RAID or battery cache emptying the cache is not cleared on subsequent reboots. On the latest controllers, you can do it from the BIOS OF THE controller.
3. This is cleared on every reboot - there is NO valid reason for data to remain 'active' in the video RAM. If you're worried, put off the power, unplug, hold down the power button / stop for 10 seconds.
Tags: Dell Servers
Similar Questions
-
local web development issue: server and ampps port 80 conflict
Hi all
I want to set up a development environment web very nice for me on my MacBook Air.
I want to run apple server and ampps, but both use the same port number 80.
Is it possible to create a set up so that the two can run on the same computer?
If so, how?
Thank you and happy holidays!
Basically, no. Two different TCP servers cannot use the same port at the same time. It's a basic conflict.
OS X is provided with Apache, and that works fine. OS X Server provides tools to configure, manage, and extend the Apache environment. Add on packages it as AMPPS, MAMP or XAMPP provide their own versions of Apache and other pieces.
Most web servers can be launched on a port range, and it's usually easier with the package of additional components and the built-in OS X Apache Web server.
OS X Server is rarely used on laptops, as OS X Server works usually better with static IP addresses, and laptops generally roam and thus generally have dynamic IP DHCP addresses.
TL; DR: The standard port and a virtual host, or use the standard web server or Add on to a port of type variant.
-
Administration server and the servers managed (WebLogic Server).
Hello
What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,
but I don't know what they are?
I saw them while I was reading on the Node manager that allows me to start the above mentioned.
-J' installs the WebLogic to develop applications with oracle reports and forms services.
1 - do I need a node Manager, Administration Server or managed servers?
2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?
Thank you very much
Answers to most of your questions WLS lie in WLS documentation:
http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm
However, a simple answer to your questions could be summed up as follows.
If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing. In the context of WLS, a managed server is responsible for hosting java applications on the server side. For example, Oracle Forms Servlet. The WLS management server is actually a java application deployed on a managed server. So, really, the "Admin" server is a kind of "Managed Server". In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:
- Server Admin
- WLS_FORMS
- WLS_REPORTS
Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.
http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm
Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet. However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).
All these components are much more complex than what I've described here. I would recommend to consider the documentation if you are interested in learning about them. That said, the best way to really learn about them likely will be to install the product and start using it.
-
What is the difference between the WCC and components system components standard
Hi Experts,
My customer has a question about the difference between coe and components system components standard, it didn't find doc, anyone can help answer this?
Best regards
Hello
Components of the system are those that provide basic functionality on the server of the University Complutense of MADRID by default. Standard components are those that are provided in the snap-in on the server, but must be enabled by case. For example files framework that is not necessary for the basic features, but is necessary if the user wants.
This guide gives the overview of level administration of the Complutense University of MADRID: http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/toc.htm
I hope this helps.
Thank you
Srinath
-
installation of Peoplesoft using an application server and a database server
IAM installing Peoplesoft on windows 2008R2 64-bit. I've had the Installer (combinations) of the matrix must be installed. I did a successful installation on the server test and its job very well. Now I have to make an installation on the production environment and in the production environment we use a 64-bit application (1 machine installed with windows 2008R2) server and a database server (1 machine installed with windows 2008R2) 64-bit words, we have two separate servers. So will there be additional tasks or settiings who have to do the installation. Thanks for giving me the details.As long as the basic connectivity works between servers, there is not particular to do things.
If you do not plan to run components as CHRP (*) Peopletools on the database server, you will not need to install PeopleSoft (Peopletools nor) on the database server. In any case, it's much better to avoid the DBWizard of production database, manually creating db will be much closer to your expectations.Nicolas.
Process Scheduler (*)
Published by: Gasparotto N November 3, 2010 09:50
-
My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me
Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.
Where do you have the phone first?
-
Problem with El Captain (5.1.7 server) and the management of permissions
Hello world
I have a big problem with our Mac Mini Server (El Captain) and the server program.
In recent weeks, the server didn't give the permissions of a folder.
for example:
Mr. X had permission to read and write to a folder.
Mr Y too.Mr. X has create a new folder one record something in it.
Mr Y had the permission to read or write to the folder create Mr. x. But he should have.
Or
Mr. X has save a file to a folder
When he opens it again it is write protected and cannot be replaced.
So you have to save under a different name in the same folder.
And every time he save/close the file.
Anyone know what could be the problem?
Thank you
Greetings from the Germany
Chris
My guess:
A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.
C.
-
Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted
Have you tried turning off and back on again?
-
IMAP and everytime I open Thunderbird is so slow because it's downloading my mail sent to server. I want that my sent mail stored on the server and no hard disk.
you have your mail on your computer or you do not. I guess that you I don't camp.
Right-click on the account in the folders pane, select settings.
Synchronization and storage deselect messages to store for this account on this computer. -
When I click on my Firefox icon instead of coming yahoo I get a page that says 410 Gone. Sorry, gone the requested resource is no longer available on this server and there is no forwarding address. Remove all references to this resource. Please check the URL for proper spelling and capitalization. If you're having trouble finding a destination on yahoo try to visit the 'Yahoo homepage"or browse a list of Yahoo online services. Also, you can find what you're looking for if you try searching below (it gives a lookup field). Under the box it says please try Yahoo help center if you need further help. If I click on the homepage of Yahoo words, it will take me to the homepage of yahoo, which is used to make my my just by clicking on the icon of my Firefox. I'd appreciate any help anyone could give me. I deleted Firefox to my computer and re-uploaded with yahoo download but always the same screen when I click on the Firefox icon.
Try resetting your homepage.
https://support.Mozilla.org/en-us/KB/how%20To%20set%20The%20home%20page
-
The Java plug-in is not installed.
The required version: 1.5.0_11Download the Java plug-in from this server and install it manually.
When you try to load it shows that he is responsible.
This has happened
Each time Firefox opened
== I had to reinstall Firefox on my new laptop computer
Other issues: to correct the problems of security/stability
Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
See: Flash update
-use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
-the release of Firefox (file > exit)
-Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
-Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
-When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1- NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
- NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
- See also: http://kb.mozillazine.org/Flash ~ ~ Red:and~ ~ How to change options to add Adobe to the list of allowed sites
-
RNOS6 running on RNDU600 +.
Looking to start a local copy or move of the large collection of files on the server, and then disconnect the PC while the task is running until the end. For example, to move a branch of several hundreds of GB of small files from one share to another, or copy them to a share.
Seems to make my PC (in wireless) is inefficient as each file seems to have sent to the PC first, then return to the NAS.
Is there a way of ordering on the NAS, so that it can continue the operation even if the PC is disconnected?
Have you tried to make using the web administration page?
-
How can a VI both server and client?
Hello
I'm new in LabView and I am trying to build a VI client and server using the TCP/IP protocol that runs in both computers. in my program I need of server and client screws to communicate with each other which means that I need the two screws to be server and client. I tried using a case structure, but it does not work. The only thing I have achieved is a normal client/server system, where the server sends a query and the customer responses. But I need the client to send requests too.i have attached my screws to this post. I would appriciate it if someone could help with this problem.
Thanks in advance.
Rambaldi.
Rambaldi wrote:
OK, im kind of confused.i came with these attached screws that do not work and its embarrassing.would would it be possible that draw you a sketch or a sample?
You have cases in the case of inverted structure. The second reading is scheduled in the case by default. Currently, you read only if the size is 1, which never happens.
In addition, the client should probably change the order of operations. He should write first, and then read them.
End of the loop is always so true, that seems backwards, especially if pair you it with a button labeled "stop."
-
Original title: Windows 2000 server
Search results for "I try to access my work PC to remote my PC at home. I need to get through my credentials and don't know where to find the information. The box says Windows 2000 Server and I do not know where to find my user name or password. The one I use to log into my work PC or PC at home do not work. »
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Host server and guest Licensing
I bought 2 physical server and bought a separate Windows Server 2012R2 standard for each server. Each server is entitled to 2 Virtual Machines to the physics of the configuration server license terms.
One of the physical servers can host 1 VM, and the other server physical host 3 VM?
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)*
Maybe you are looking for
-
new operating system mac Sierra would have all the features and capabilities that El Capitan?
Hi all new Sierra mac OS is available for download. My current OS is El Capitan. If I install this Sierra he would have all the features and capabilities El Capitan has?
-
can you run 2 iPhones for a return to the top? or will they conflict?
-
Automatic Windows updates fail with 0xD0000142 error
automatic updates for 08/10/11 for a total of 6 failed. MSG for error as stated above: 0xD0000142 Help please!
-
SCR24 - closing the lid not recognized
I had my Z3 with coverage of style SCR24. These days that the smart window does not work, IE the phone always treats the lid open. I tried to reinstall the app, but that did not help.
-
Cannot access the hyperlinks in the body of an e-mail message.
I have confused some people responding to another poster, who has similar problems in a different system. I use Vista. I also have Outlook Express on my computer for my emails. Another Member of the community was told that I couldn't have both Vist