3520 doesn't print images

Similar Questions

• HP Deskjet 3520 doesn't print any black ink, will print colors

  I have to keep cleaning print head?  I have to wait 30 minutes between cleanings?  All cartridges are full.  Cleaning how usually takes to lead?  What other problem would be?

  I turned to 'off' in the Properties , the gray levels, and that has solved the problem!

• DeskJet 3520 doesn't print until the computer has been restarted

  I had this printer for years and have never had a problem with printing until recently.  When I try to print something (whether from a Web page or a word document), it crosses as if everything is OK and even displays the print icon down in the taskbar.  But the page will not be printed in fact until what I restarted the computer.  I tried troubleshooting, but this utility says that there is nothing wrong.  My laptop has windows 7 and when I looked for drivers, he said that windows 7 has updated drivers.  I've pretty much exhausted at this stage of my knowledge of the printer!

  The only changes that I made recently are to move from a cleaner who had windows vista on a laptop that has windows 7.  And it printed fine when I made the change.

  Hello

  You have the same problem when you try to print from Notepad or Wordpad?

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02205477

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• PSC 1610 began to print images of small size

  When you try to print a picture this morning the printed image is greatly reduced in size, about 2 "x 3". To the best of my knowledge, we did nothing else by stopping last night. This e-machine, running windows XP and printer led major for two years. Microsoft automatically installs updates from time to time, there may be something they did.

  I tried to solve the problems/correct the problem, but being a novice in computer science I quickly overwhelmed my meagre understanding of this new stuff. Check other posts leads me to believe that it is a software problem, maybe a setting has been changed. This understanding is the limit of my knowledge on what might be wrong or how to fix this problem.

  Any help, I hope step by step, would be greatly appreciated.

  To all those who may have this problem in the future, here's the solution. Pull the bottom of the file tab in the upper left corner of the screen. Select "Print preview", it should show the image size reduced to a preview page. Now select "Page Setup" in the file tab drop-down. Mine indicated a 30% scale, change the scale to 100%, click 'OK '. Now look 'Print Preview', let's see a picture in full size on the preview page and the printer will print the image in full size. PROBLEM SOLVED! I don't know how the level of 30% was chosen, I did not this, something in the program Firefox or recent upgrade must have reset to 30%.

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Deskjet F2280 all-in-one: color print images saved offline problems.

  When I print an image that I downloaded from the internet, the colors do not conform to the original (a lot of blue in there).  I printed directly from the printer itself, and that's fine.  I changed the color cartridge, did the cleaning, checked, I had download the correct software and tried to open the image in paint, but still not good.  I changed the setting to fast eco who, although not the bright, the image itself so more true to color.  Can anyone help please.

  Hi @anniegwenand welcome to the Forums of HP.

  I see that when you print images that you save from the internet, the colors are not what you expect and the printed output is more blue than the original. Because when you print directly form the printer (copy) the output is as expected, I suspect that the issue has to do with the print settings, a driver or a program that you are printing from.

  I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server. This will help isolate the driver.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer). The installation screen and the software opens and you can click on connect a new printer.

  If the fingerprints still don't match what you see on the screen, try to print in a different program. For example, instead of save an internet image, print the image directly from the browser. In bold, what brings the cause to wonder, when you save, you are printing on photo paper? Have you compared the print quality between an image printed on ordinary paper and a image on photo paper? If you use photo paper, and that's the only time where the output is more blue than expected, please try different photo paper. I know this sounds unlikely, but I seen the book be causing more time than you probably imagine.

  Let me know the results of your efforts at this point, and we will proceed if other troubleshooting is necessary. If something I suggested the problem, please click Accept button Solution below to report your post as solved.

  Thanks, I look forward to hearing back on your part.

• DeskJet 3511: HP Deskjet 3511 does not print images

  My printer has stopped printing images. I can print text documents, but with images (I tried jpgs and pngs) it starts work, print the first few lines, then freezes. Print Manager continues to show "print page 1, 49% complete... "Finally, printer spits out paper with the incomplete picture. Then State happening to 'Idle' and nothing will be printed. I tried printing suspension/resumption, restart the printer, printer removal/re-adding (same uninstall/reinstall) nothing works. I'm on Mac OS 10.7.

  Hey @jessicajones6,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the printing problem you encounter when you try to print images of your HP Deskjet 3511 e-all-in-one printer to your Mac OS X 10.7. Because the printing process seems to be 'frozen' and you cannot print anything after that this problem occurs that I think that this issue can be linked on the Mac driver. To solve any driver or software can I please have you follow the steps below.

  Step 1: Resetting the printing system:

  I'll have to start resetting the printing system on your Mac, as it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Deskjet back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the device:

  1. Please click here to download the drivers for your device
  2. Once the site opens click on the download button in the upper left corner
  3. Once the download is complete, follow the instructions on the screen to install your printer

  Once the installation is complete please try printing an image to check if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Re: HP Deskjet 3520 - will not print black text

  Re: HP Deskjet 3520 - will not print black text

  so frustrating piece [language edited by moderator]

  Hi @Jaaanosik

  Please use the following document to solve the problem. Printer cannot print black ink or color ink, or prints blank Pages.

  If the problem persists, I would call you HP regardless of your warranty status. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

• HP4500 want to print images mirror if so, how?

  You want to transfer T-shirt, option for paper transfer listed, but no mirror image will be created.

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bpu02032

  How easy and fast to print images in the mirror just needs support on them. In this way, you can print to a PictBridge compatible printer.

  I hope this helps!

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• PSC 2015 does not print images

  I use a psc 2105 with windows 7 Home.

  For some time the printer does not print images of any program, Word, paint etc.

  I've been in contact with a Dutch forum and desperately, I installed a driver for a PSC 3050 and Yes, it worked.

  However, I get the message: GET /DevMgmt/DiscoveryTree.xml HTTP/1.1, which is well documented on the internet.

  So, I looked to Decice tab settings and everything I could find information on the feeder.

  Then, I went to try to download a dribver universal printer PCL6, as advised, but couldn't it works, so I'm or solutions.

  can someone please help me more?

  Concerning

  Arie

  I'm happy to have contributed in any way I can. Just to let you know that you can show your appreciation by clicking on the star by each of my posts to provide praise or step that fixes your problems, you can choose that as the solution for this thread.

  If not, have a great day and stay dry!

• Printing image in PDF format?

  Hello

  I have recently been in contact with an online photo printing company who asked me to send my JPEG image in PDF format.

  I know how to upload an image for, say, Cute PDF, but is the final product - the final printed image they will post for me - of the same quality as if I went to a point of sale photo printer that printed the image as my original JPEG?

  Thank you.

  SteveH

  Compression = quality! High QUALITY = low compression.

  Use the Save as PDF option in Photoshop to save a PDF file. [High quality Print] should be OK.

  

  Try them and if the quality is as their request, ditch them. A decent lab or printshop accepts JPEG.

• What licenses Adobe stock I need to print images on sites like Zazzle.ca?

  What licenses Adobe stock I need to print images on sites like Zazzle.ca?

  Need you the extended license for each image.