360 images sequence question (transparent PNG)

Similar Questions

• 360 image sequence: smooth question

  Hello to everyone

  I already have sequences of images 360 for a customer, it was like 65 for each element, so it's been quite fluid and smooth.

  A new customer gives SMEs 24 images per sequence.
  The problem isn't that "good, is not as smooth as the 65 one", the real problem is that he doesn't seem to understand the action > > > is correct on the PC Viewer, but on the ipad, I try like 10 times with my finger for the entry of the action (and the action is HARSH)
  IMPORTANT NOTE: when I saw on the PC, it is well with mouse works and actions for the good...

  
  Is this due to the fact that it has 'only' 24 images?

  For a smooth 360 ° rotation, use at least 30 images.

  Here

  I know that you are not questioning the sweetness, but it's probably a good thing to start with this first and see what happens...

  Post edited by: Christophe_Jossic

• Masking of the image of the poster in sequence with transparency

  Hi, people

  Just a simple question. I have a sequence of images with a described sweater in png, transparent background format and the first image as an image of the poster, as told in the help.

  When I place it on a white background, no difficulty. The image rotates when swipped and it stops after that.

  

  The problem is that I want to put this sequence of images, partially on a flat color background and a few other square photo. The image sequence plays well, BUT the image of the poster there during rotation, spoil the effect. This does not happen when the n is color paper.

  Any ideas what I'm doing wrong or how to avoid this? Maybe placing the sequence of images as a State second in an MSO?

  Thank you very much

  Gustavo (detachment of Madrid)

  Andrew,

  This trick works well. Thank you!

  Your response, I paste here (as it was more detailed it) in order to have as well as a reference here:

  A way around this is to make a MSO of the first State being the first image in your sequence PNG and the second State being the image sequence.  You set the DSO to AutoPlay with a short interval (dry 0.125), tell him to play 1 time and stop at the last frame.  If you want to change the settings for image sequence once you have back the ASM just select the State in the object States Panel and double click on the image sequence.  Options in sequence of images such as "Drag to change the Image" should operate normally.

• Transparency of image sequence

  Hi all

  I know very well that transparent png are not supported in image sequences

  But I was wondering if it was on the road map

  Any idea, would like to know!

  Thank you.

  Tim

  Keith Gilbert uses transparent images for this rotation effect. In his tutorial, he explains how to configure everything, but he forgets the part about the deselection of the option display the first image.

  http://ContentViewer.Adobe.com/s/community%20SWAPP/7438a740d50046539216612a2b4b43e1/cross-product%20SWAPP/Make_it_Spin.html

• Flatten the two (or more) transparent PNG images (32-bit)

  Hello

  How to flatten two (or more) transparent PNG (32-bit) images.

  The result must also be a transparent PNG (32 bit).

  It is the solution that I was looking for.

  Thanks Darin.K.

• [CS6] Export a transparent PNG image in InDesign CS6

  I usually export a page element to a transparent PNG in InDesign CS5.5 (and below) image by using the following script:

  pageItem.exportFile(ExportFormat.pngFormat, exportImageFile);
  

  But this script does not work in InDesign CS6: it exports an opaque PNG image instead. It seems that CS6 adds a new option to decide if the PNG transparent or not - and the default image export is non-transparent.

  I tried to change this option for a transparent PNG but failed, can you please help?

  Try this:

  app.hostObjectDelegate.pngExportPreferences.transparentBackground = true;
  

• Image sequence issue

  Hello

  I have a sequence of images of a car (360 degrees) with legends attached to certain corners of the car, so when you drag your finger to turn the car the legend then fades out. My question is this. Can I make a button and link to a specific image in the image sequence? Any help or ideas are as always very much appreciated.

  Thank you

  N ° that you could do, is to have different States of the image sequence in

  different States of a MSO. So. The first State would be all

  sequence with button goes to the State and others

  buttons to take you to the first State, and all others to which you want to navigate.

  I did myself and it sounds way more complicated than it is.

  Bob

• No fade option chained in folio superimposition / image sequence Panel?

  I have 8.0 10.25 version of DPS but the cross fade image sequence function is not available/installed?

  Y at - it another fade option chained in image sequences?

  See attachment.

  Thank you!

  

  Just a workaround solution. Set the fade and fade out straight of the seq image. will then render as png with alpha transparency channel.

• Indexed color and transparency png

  I work with a software developer who reviews his subtitle rendering application to meet the specifications of my company. The rendering engine produces a sequence of images, and we agreed on the use of the PNG with transparent background as the format for the image sequence. The rendering engine produces PNGs in indexed color mode, Photoshop and Windows Photo Viewer recognize the background transparent, but Premiere Pro CS5.5 and CS6 don't. I can re - register one PNG after this passage in RGB mode in Photoshop, and then the Premiere Pro recognizes the transparency. I'm not surprised by this. What I'm surprised by, is that the software developer said that it can import the same PNGs, without going in RGB mode, in his copy of first Pro CS3, and first recognized transparency.

  Is there something I can do in addition to batch processing in Photoshop to get the first Pro CS5.5 or 6 to recognize transparency in an indexed color PNG? If something has changed since CS3? I look under Edit > interpret footage to make sure my box to ignore the Alpha channel is not checked for the png, but I can't find another relevant definition to check, and I can't understand why CS3 would be able to recognize an indexed color PNG.

  PNG should be RGB.

  CS3 was a long time ago...

  However, you can import in color indexed with transparent GIFs.

• Need help creating simple Gradient image sequence

  New to After Effects program. I am trying to create a radial gradient that I can export as jpg or png image sequence to use as a mask to run my animation in 3D Modo. I can hand paint that the sequence of images in Modo, but painting handmade 450 executives will make me lose my mind. I know there is a way to put 1 black frame of kew and 1 final frame of the large circle and have AE interpolate all inbetween then convert each frame to make the image sequence.

  tried searching and reading online, but couldn't find a clear tutorial. Any help is greatly appreciated.

  The photo is just a quick sketch to show what I'm after.

  THX

  brand

  I thought that I have would illustrate method of Rick, but because I don't know what background you use I also illustrated the ways to use a collar of material or feathered masks to make the edges of a solid or gradient white transparent.

  

  A: this is what looks like a radial shape with a ramp layer.  The edges will be solid on a transperent background, but you can add Matt neck if you want to soften the edges.

  B: a solid white with a mask elliptical may simply be feathers so that edges are transperent.  Draw the circle with the elliptical mask tool all holding the shift to create a perfectly round circle.

  C: it's the same shape layer with a ramp radial as shown in the figure A only shown on a black background, a background.

  D: this is the same white solid as shown in image D only with edges to feathers on a black background.  An upside to do this way is that you don't have to animate the departure and arrival of the ramp if you decide to animate the position of the circle.

• Rendering of image sequence problem

  I use Adobe Photoshop CS6. I never had this problem before, but now I have a lot of layers and I want to export them by video rendering (sequencing of the Image).

  I want all the layers in the document to be redered, each being separated. PNG file (it's the sequencing of the Image, right? "Correct me if I'm wrong). Earlier, as I remember, I could make layers and they would have become isolated. PNG (no problem) files, but now it is only made a single file (a single layer, that too, with no transparency - black background).

  What I am doing wrong?
  

  Here's the rendering parameters:

  Layers - 97

  Format - PNG (compression enabled, non interlaced)

  Size - Size of the Document (200 x 200 px)

  Cadence - cadence of the Document (30 fps)

  Range - all managers

  Alpha channel - no

  Quality 3D - interactive

  You're kind of quibble. Back in CS2 and earlier there was no keyframing some frames and each layer has been assigned to an image. It is these images that can be exported to a sequence of images.

  The only step the forgotten OP was creating environments of layers, which is available in the timeline panel, if the time line is mode frame.

  After that's done then export to image sequence works.

  But as you said, using the script is a little faster because it reduces the number of steps required to get the same result.

  That's assuming that the OP has created a layer for each image, he needs for his animation. (again, assuming that he wanted to make an animation).

  So much assumtions. Aye, aye, aye...

• Play the image sequence

  Hi, I have png image sequences in my active folder, and I would like to 'play '. Is it possible to do?

  Thank you

  According to the number of images, quality images and delay between each picture, you could probably get away with just using a QTimer.

  Although I have not tried with cascades/bb10, I did it with older BBOS and almost never ran into performance issues...

  in a nutsheel to store a table of images then set up your QTimer (e.g. all the 1 second) to display images in this table using a circular counter.

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• How to import files as a sequence with Camara png first corrections?

  When I import sequence png files in AE (instead of 8 to 32 bits per channel) the filter Camera Raw opens. I'll do my settings for VC, but only the first image of the sequence shows the settings when I play the composition. How can I request the Camera Raw, the first image adjustment apply to the following fields of the composition?

  If you get camera raw to open when you import a png sequence there is something non-standard about your workflow or your images. It does not really matter. You cannot really manually adjust each image in an image sequence and get what anyone but the flicker of the levels in the images. If you did something like Time lapse and you got different shows you want good trying to rank individual frames is a really difficult and almost impossible to do. There are a lot of tools.

  The best approach is usually to just import the image sequence, then make color grading. The sequence of images should be sized prior to importation, so that the images are 100% scale in some parts of your project. If I were to create a model of 4K with a sequence of images of my DSLR and I wanted to fill the frame I would be scaling images up to 20%. That's a lot of lost time and you will get a better picture, better adapted to video, if you treat previously images in Lightroom or batch process in Photoshop or bridge and keep to the right size.

  If you have you try to challenge it is a plug-in called Deflicker digital anarchy which does wonders. It's a little slow to render, but hundreds of times faster than the frames in a sequence of images individually calibration.

• image sequence does not work

  Hi everyone I have problems with the picture feature in CS6. When I look in the viewer of content it works perfectly, but when I export to a SWF file, it does nothing. is it possible to have this function in the SWF file? If the answer is no, how can I insert a sequence of 360 images in my swf? Thank you, Elia

  DPS is used for the construction of applications/folios for Android, iOS, and Windows 8 devices (phones and tablets). As said by amiellemiel , sequences of images are only for DPS. Feature DPS can be exported to other file formats.

  Try the forum Flash Adobe animate CC - homepage for the help/info on what would be the equivalent in SWF.