4.1 upgrading of concern (32-bit vCenter) upgraded to 64 - bit

Similar Questions

• How can I tell what version of Office 2010 BITS, I have IF...

  Hello
  How to find which version of BITS of Office 2010 that I have because he came on this computer purchased, but I have not actually paid to download the OFFICE 2010 program?  When I clicked on Office 2010, need me a screen where I can buy it if I want to, but I don't get to run the program.

  Secondly, I have Office Starter 2010, which I am able to use already.  My real concern is BIT version of update of security for Microsoft Filter Pack 2.0 (KB2553501) to install.  Do the 32-bit or 64-Bit edition?  My Windows 7 update process offers the 32-BIT version, but I don't know what version of BITS is my Office 2010.

  Thirdly, my Office Word Starter 2010 and Office Excel Starter 2010 are Version 14.0.6129.5000 (32 bit).  I should just assume that the full Office 2010 program I pre-installed for Purachasing ONLY is a 32-BIT version?

  dragondaveWR

  32 and 64-bit versions of Microsoft Office can exist on the same installation of Windows. So if you have Office Starter 2010 32 bit installed, its more than likely other applications are also 32-bit.

  To determine the architecture of office you have installed.

  Open one of the Microsoft Office 2010 applications installed on your system.

  Click file > help

  

• G7-2238nr of Windows 8 for Windows 7 need 2 USB controller drivers - listed below

  Hello.

  I can't stand Windows 8. I got my 2238nr G7 to win 8 for Win 7. I found all wise pilot, with the exception of two items which I can't find anywhere. they are both listed in the Universal Serial Bus (USB) Controller with hardware following ID:

  #1.

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184B103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_184B103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  PCI bus 0, device 16, function 0

  #2.

  PCI\VEN_1022 & DEV_7812 & SUBSYS_184B103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_184B103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  PCI bus 0, device 16 function 1

  When I plug my USB in the left side of the laptop it does not work. When I plug a USB key into the right side of the laptop, it works fine. So I thought this is my Generic USB drivers, but I can't find anything for these anywhere for Windows 7. Help, please!

  Hello

  Download and install the Chipset concerned (32-bit or 64-bit) driver from following link.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Kind regards

  DP - K

• Dell PowerEdge 2950 of installation

  I'm testing DPM on a Dell PowerEdge 2950.  To make this work, I have need to configure IPMI if I can have a server go to safe mode and out of safe mode.  I've been Googling like crazy, but have been unable to find an answer on how to get this working.  Whenever I try to put my host in standby I get this message:

  vCenter has determined that it cannot resume host & lt; hostname & gt; standby; Therefore, the eve of the entry task was suspended.
  Confirm that IPMI/ILO is configured correctly for host & lt; hostname & gt;.  Or, configure vCenter to use WoL, making sure there are at least two or more hosts in the cluster, and then try the task again.

  A couple of things about this error: an it is a cluster two host (for testing purposes).  Two, I use Dell hardware so I have to use IPMI not ILO.

  I have connected my DRAC page and enabled IPMI over LAN, but I don't know what else to do here, and I don't know where all the parameters concerning this in vCenter or ESX.  Any help would be appreciated.

  Gunnar

  I used the setting of Dell OpenManage.

  Under system / main system / remote access, you can see:

  Select the IPMI Over LAN-> Yes (don't forget it is YES)

  SOIL active Yes

  XXXXXXXXXX MAC address

  IPv4 address

  IP address static Source

  YYYYY IP address

  In ESX, under Configuration / PowerManagement / properties I use:

  BMC IP: YYYYY

  BMC MAC: XXXXX

  André

• What Version should I download/install

  Hi all
  
  I want to download and install an oracle product but unable to figure out if I should download 32-bit or 64-bit. Please help me. Uname-a gives the following result.
  
  Oracle@host:/Home/Oracle > uname - a
  Linux 2.6.9 - 89.ELsmp #1 SMP localhost.locadomain.com kills Apr 20 10:34:33 EDT 2009 i686 athlon i386 GNU/Linux

  882065 wrote:
  Thanks Sb,

  I understand what you're saying. But why don't the showup 64bits? I mean hardware 32 bit and 64 bit OS? What IS the uname returned?

  NOTHING you have posted never say everything concerning "64" bit anything!

• The upgrade from vCenter for 64-bit

  I'm about to upgrade from version 4 to version 4.1 vcenter server and I have a few quick questions. I am a little concerned about the part of the database from the upgrade.  We currently have the database on a server remote windows 2003 and I was curious what, if anything, I have to do to the database if I use the DataMigration tool?  I have a new 64 bit server ready to go, but I'm a little curious what needs to be done to the database and it is ok to point the new 64-bit to 32-bit SQL server vCenter?  any help is appreciated.  Thanks for a great site!

  Perry

  prutter wrote:

  Yes, it is remote.   I have it!  Is the same thing applies to the Bishop of update database?  Thanks again.

  Yes, but Crossover requires a 32-bit DSN

• Upgrade paths for vCenter Server 4.0/32-bit to 64-bit/5.0

  So, for various reasons beyond my control, when we installed vCenter server when we migrated from 3.5 to 4.0, it has been installed on 32-bit Windows.

  Data backended by a full instance of SQL Server (not the MSDE version that comes pre-packaged with vCenter).

  So, I try to understand the strategy of less impact for the trip to 5.0.

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  If I had to, I guess, we could install vCenter 4.0 (64-bit) on the new host and THEN perform the upgrade, if it was really important, but I somehow don't think it is.

  Once that is done, we would eventually just make a backup/restore type upgrade path to move data out of the old host and the new host and re-point vCenter Server in its local database now.

  A that someone does something similar to this? Traps, we should be aware of? Warnings that it would never work the way we expect it to be, etc, etc. ?

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  That's what I'd do.  It your DB is remote, it is a fairly straightforward upgrade.

  1. turn off your old Instance vCenter

  2. backup your DB instance

  3 copy the SSL directory off the old vCenter and the new (you'll probably to manually create the path, before installing vCenter)

  4 set up your ODBC connection and test

  5. install vCenter and use existing DB

  Assuming that you are going to use the same host name and IP address for your new instance of vCenter, like your old, all stocks will be as it was before the upgrade.

• Upgrading vCenter 4.0 32-bit to 64-bit vCenter 4.1

  Everyone...

  Upgrading vCenter vCenter 4.1 to 4.0u1. The current server running vCenter 4.0 u1 is just a Windows 2003 based VM.

  Databases supporting vCenter and Update Manager is installed on a physical Server SP3 to SQL 2005 64-bit.

  I want to plan and to implement the upgrade as follows:

  Remove the current vCenter domain and turned off.

  Turn on a new virtual machine running Windows 2008 64 bit and rename it as the old server vCenter.

  Add the new vCenter server to the domain

  Installing vCenter 4.1 on the new vCenter server and use the existing databases that support

  the old server vCenter.

  Use the Update Manager to upgrade vSphere 4.1 on each managed host computers.

  What possible questions could meet or must be aware, as I implement this

  upgrade process?

  During the installation process and it asks to use an existing database, will be installing

  just updated the database to process and store the configuration data of the server vCenter 4.0?

  Once the upgrade is complete for the new vCenter server.  I see the same configuration

  as I saw in the old server vCenter configuration?

  Looking forward to all the world the answers... Thanks in advance!

  I agree with Redbaron51.  I used the setting level guide and things worked perfectly.  There is a batch file that backs up the database and converts it to the new 64-bit server.  It was very easy and worked as advertised.

  Mike P

  MCSE, VCP3/4

• Advice on upgrading to VCenter 4.1

  Hello world.

  Our VMware environment is still sitting at 3.5.

  We plan to migrate to 4.1 and trying to bring together the thoughts about what to do with VCenter.

  We currently have a server Win 2003 physics VCenter connected to a SQL 2000 Server (for VC and UM databases)

  We want to end up with:

  -VC running as a virtual server

  -win 2008 R2 64 bit

  -VCenter 4.1

  -databases on SQL 2005 64-bit

  I'm not sure that the best way to do it.

  I created a Win 2008 VM. With that, I will install VCenter 4.1

  But here, I created a new SQL database and recreate the data centre and cluster and then import the hosts and virtual machines in our server origianl VC.

  Or should I try and export / import the DB from SQL 2000 to SQL 2005.

  I don't mind a database of UNIFIED messaging to create empty because we have not yet use.

  Any advice on this would be greatly appreciated

  Thank you

  Welcome to the Forums

  Depending on the complexity of the configuration and the size of the environment.

  If there is not no d ' assign permissions or pools of resources configured, I would setup a new vCenter

  recreate the Datacenter and Clusters and import the guest (virtual machines will follow)

  After the organizers have new vCenter, upgrade / reinstall them at ESXi4.1

  If you really want to update, here is the link to upgrade doc http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  concerning

  Please allow points if you find this useful/correct

• Upgrade to vCenter 4.0 with Cisco Nexus 1000v installed

  Hi all

  We have vCenter 4.0 and ESX 4.0 servers and we want to upgrade to version 4.1. But also Nexus 1000v installed on the ESX Server and vCenter.i found VMware KB which is http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1024641 . But only the ESX Server upgrade is explained on this KB, vCenter quid?  Our vcenter 4.0 is installed on Windows 2003 64-bit with 64-bit SQL 2005.

  We can upgrade vcenter with Nexsus plugin 1000v installed upgrading on-site without problem? And how to proceed? What are the effects of the plugin Nexus1000v installed on the server vcenter during update?

  Nexus1000v 4.0. (version 4).sv1(3a) has been installed on the ESX servers.

  Concerning

  Mecyon,

  Upgrading vSphere 4.0-> 4.1 you must update the software VEM (.vib) also.  The plugin for vCenter won't change, it won't be anything on your VSM (s).  The only thing you should update is the MEC on each host.  See the matrix previously posted above for the .vib to install once you're host has been updated.

  Note: after this upgrade, that you will be able to update regardless of your software of vSphere host or 1000v (without having to be updated to the other).  1000v VEM dependencies have been removed since vSphere 4.0 Update 2.

  Kind regards

  Robert

• HP Elite 8200 SFF 8 GB RAM: Windows 10 64 - bit - upgrade Win7 to Win10 on HP Elite 8200 SFF - future drivers to win 10 64-bit?

  I've upgraded 3 computers (portable and desktop computers) to WIN 10 since the launch and made part of the Windows program initiated for 8 months - (identify problems with NVIDIA drivers, etc.). All of the family's computers have upgraded with minimum agitation outside HP Elite 8200 SFF - core i5 vpro.

  Be aware that this PC passes all diagnostics equipment and a new hard drive and compatible memory and work 100% without error on Win 7 Home - motherboard and processor are out of the box, two weeks ago. The PC has been reset to Win 7 since.

  After installation, there was a lot of blue screens including: -.

  Memory management errors

  Bad pool header error

  Several internet queries (probably from Microsoft OneDrive store)

  I understand that this machine has not been tested as part of a verification of the compatibility of HP / Microsoft.

  My question is: there will be updates on the site of HP driver Support in the near future to include 64-bit Windows machines concerned 10 drivers? Or links included for Intel Chipset drivers when they are available to Win10?

  At any time.

  I am pleased to have been of assistance.

  Maybe try again before the end of the free period.

  It is possible that they will have worked on bugs and the most up-to-date version at W10.

  Who knows, it might even be the integrated graphics Intel W10 driver that is buggy.

  I got my Elite 8200 throwing XP Pro x 64, Vista, W7 Pro, W8.1 Pro business and now in W10 Pro works perfectly on every operating system.

• Equium A100-306 memory upgrade from 2 x 512 MB to 4 GB for Windows 7 64-bit

  Hello

  I want to upgrade the RAM on my A100-306 to make use of the full capacity of win 7 64 bit. I was looking around, I know that I need PC-4200 (533 MHz) 200 Pin SODIMM modules, but I'm not clear on whether they need to be combined. Ideally, I would like to buy a single 2 GB module now and then take a second in the future. My questions are:

  (1) is it acceptable to have a single 2 GB module?
  (2) can I leave in one of the current 512 GB modules give me 2.5 GB?
  (3) the extent to which the second module must match the first case has been purchased and added at a later date?

  I look forward to the advice.

  Concerning
  If

  Hello

  The A100-306 supports the Mobile Intel® 945GM Express Chipset.
  This chipset supports 4 GB RAM max.
  This means that you can use 2 x 2 GB modules.

  Yes, you can use 512 MB and 2 GB of RAM, it should be possible

  Usually it s recommended to use modules with the same specifications
  I mean that the modules must use the same speed (Mhz) if one of the modules will be slower then the fastest module be pointed down and the two modules would go to lower speed

• HP g60 - 104 CA: need for imformation on upgrading ram on laptop 64 bit hpg60-104 ca

  Hello I want to upgrade my computer hp laptop, but I bought used, a member of the family and have way to much money into it now.  It has been freezing upwards and I to ho. d the power button down to keep it shut down to perform a reboot.  I had to buy a copy of windows 10 and installed it and they had problems with the hdmi and had to go back to an older driver, so the automatic update option is disabled. I need to know the limit of ram that I can go and the ram specifications. There no 2 GB now and it's a 64-bit

  Thank you

  Hello

  Max 4 GB.

  In this MANUAL , see page 1-3. Page 4-13, 14 shows the replacement procedure.

  two-2 GB, 667 MHz, 200 pins, PC2-5300 DDR2, SDRAM, in both slots, max.

  Card also say the same thing.

  Your laptop

  Concerning

  Visruth

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to upgrade windows 7 64 bit family to windows 7 pro 64-bit

  Windows whenever the update failed and she wondered whether there was another way to do the family windows 7 64 bit upgrade to windows 7 64 bit pro rather than a new installation.

  Upgrade (COA) product key, has been accepted, but after 5 or 6 minutes. notified an upgrade has failed.

  Both versions of Windows 7 are complete editions and not OEM.

  Can anyone help with this problem please.

  Concerning

  are

  A useless update.  There are only a few rare users who can benefit from the difference.

  Thanks for the reply, but the upgrade is useful if you prefer to stay with WIN 7, instead of opting for the intrusive WIN 10 upgrade.

  Anyway, solved my problem with a reboot.

  Concerning

  are