4.8.5 WDM not finding devices

4.8.5 WDM not finding devices

Recently, I replaced my WDM 4.7.2 existing environment with new hardware and OS.

My new WDM environment works WDM 4.8.5 on W2K8 R2 (64-bit).

While some devices check in I'm going to have trouble finding other existing devices of all the different models of Wyse (S10, V10, 1125) and 1200LE

I know there is a version of WDM 4.8.5 HAGENT requirement but the terminals I meet the minimum reuquirement haven't checked that I was expecting.

I have run a few network traces and that you can see one of the incriminated having a conversation with my new WDM server, but I see a query error incorrect HTTP 400 - invalid verb in the trace.

Anyone can shed some light on this?

Thank you

These former clients use a verb SET to start the communication which was hosted in IIS6.  IIS7 on Windows 2008 R2 will not reject authenticated PUT verbs for safety.  If you can rewrite PUT it at GET say with a URL rewriting done using a VIP on an external device, you can make them work.  This rejection is by http.sys which runs at the kernel level, so you will not be able to rewrite the verb on the server itself.

Thank you.

Tags: Dell Tech

Similar Questions

  • I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

    original title: Chess Titans

    I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

    These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

  • virus wiped out my audio device can not find device manager on computer not where

    virus wiped out my audio device... cannot find device manager on computer anywhere... all said that it works correctly

    Hello

    Please go to the Microsoft Community Forums.
    Because the question is not clear, please answer these questions, which will help us to help you best.
     
    1. you are unable to find the audio device in Device Manager?
    2. are you unable to access the device on the computer Manager?
    3. What do you exactly mean by "everything that says it's working properly"
    4. do you get an error message?

    Method 1:
    I suggest you to download and run Microsoft Safety Scanner and check if it helps:

    Reference:
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
     
    Method 2:
    Check out the link and follow the steps in the article:
    No sound in Windows
     
    If the problem persists, please write to us with the answers to the questions above so that we can better help you.
  • iTunes does not find devices in Windows 10

    I installed the latest version of iTunes on my new laptop running Windows 10.  When I connect devices, nothing shows up on itunes.   No devices and 'peripheral' is not in the drop-down list.  I uninstalled and reinstalled without success.  When I connect iPad he asked to allow the computer and I select allow but is not displayed in itunes.   Device is connected to the computer and I can see in fie Explorer.  Any help?

    Thank you

    Hi danoway,

    If you encounter a problem with iTunes on your computer Windows 10 you see not your connected devices, such as your iPad, I suggest that you are troubleshooting by following the steps in this article - iPhone, iPad, or iPod not recognized in iTunes for Windows.

    Thank you for using communities of Apple Support.

    Best for you.

  • Captivate 8: inspect dashboard do not find devices

    With the help of Windows desktop running Windows 7 Ultimate and 8 Captivate and try to get a glimpse on board inspection. I have a laptop MacBook Pro starts the Mac operating system and an iPhone, which are connected to my network. I know that they are connected to my network because I am able to navigate and receive emails on these devices.

    The plug to inspect the edge is installed in Chrome, but when I click the icon Edge inspect chrome, I get a "Waiting for a connection...". "message that doesn't go away, and the MacBook Pro and iPhone devices never appear.

    inspect.gif

    There must be a place to specify what devices I want to listen to samples. What should I do to get a glimpse of my iPhone edge inspect at least? (Once I know how to do this, I would also like to get an overview of the project on my iPad.)

    I watched the video of Dr. Pooja where it explains how to use Edge inspect. His instructions were to a high standard and lack detail important it makes me wonder if she ever used dashboard inspect with Captivate itself.

    I finally found this

    Adobe® Edge inspect Installation Guide

    which explains in detail what needs to be done.

    After following the instructions in the Setup Guide inspect dashboard, I could finally see my Captivate project on my iPhone.

  • MacBook can not find bluetooth devices

    I just bought a new Macbook.  He can not find bluetooth devices.  The device is fully charged and so forth.  He saw the mouse for a fraction of a second, but then he fell.  I tried other bluetooth devices.  It does not find.

    I had this problem too, turn on the Macbook and off is your best bet. But if this does not work, you can go into the settings of your macbook. Settings - Bluetooth - advanced and ensuring that all things have been checked. Hope this helps, good luck to you.

    ~ Michael M

  • 179tx 15ac HP: hp 15ac179tx not find bluetooth device

    When I connect my laptop with my cell phone he found no mobile device

    looking for bt do not find it please help

    Hello:

    It works fine for me, so the problem must be on your side.

    I'll give you a somewhat older driver (because there are not the newest) and if she's not even download, try to get it from another network or PC.

    This package contains the installation package driver for Realtek Bluetooth in laptop models running a supported operating system.

    Exit the: 26 April 2016

    Version 1.0.0.52 Rev.A

    File name: sp75614.exe

  • When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

    Hello;

    I can't find the original owner of my camera.

    I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

    My phone number is:

    IMEI:

    *********

    ICCID:

    ********

    Serial No.:

    F2 * FFK

    Part number:

    ME300LL/A

    Please, please, please help me.

    best regards;

    Siavash


    < personal information under the direction of the host >

    Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

  • Satellite L500 - could not find the SRS audio device

    At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

    Can someone tell how to fix this?

    Hello

    I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

    What do you think to update this driver? You can get it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

  • X 1 carbon Touch Fingerprint reader 'can not find the fingerprint sensor device' e7210005

    Hi all

    I have spent far too long trying to solve this problem by myself and need to reach out to someone who may have solved this problem. I read tons of questions similar online and restarted from dozens of times after trying many different things.

    I have a carbon 3444-GCU Touch who can not see his fingerprint reader. It used to work when it is brand new, but after many updates from lenovo and windows, it now does not work:

    I'm on Windows 8.1, with all updates.

    No problem in Device Manager.

    Coprocessor (WBF advanced mode) Fingerprint TouchChip installed under thin biometric devices.

    _Not_ power management value disable device to save power.

    The bios is 2.61.

    I suspect that the problem is very low, because even the BIOS can not find the device trying to implement.

    If I have the lates BIOS, but it can't see the camera - what can I do?

    Thank you all...

    you have a faulty drive.

  • Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

    Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

    Nobody here can help, and Apple will not help you to overcome the blocking of activation.  If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.

    See disable find my iPhone Activation Lock - Apple Support

  • New drivers Conextant Audio can not find audio devices

    I have a lenovo u410 and when I updated to windows 8.1 like many people my home dolby cinema did not work.

    So, I tried to find the answer and fix it myself. I uninstalled all audio drivers and downloadled then the new but when I try to install it "can not find the device" I don't get any audio from my laptop and I don't know what to do.

    I'm confused, I have two audio drivers in my drives C: and D: (D: is a SSD) Please help I really like this laptop but I had a number of problems with it.

    And now that the fixed so I appriciate the help, but I don't really know what happened that makes get fixed haha

    Solid_Curver thanks, I am always impressed by the lenovos customer service

  • HP 15 ac189tu not find the bluetooth device please help me

    HP 15 ac189tu not find the bluetooth device please help me

    PLEASE HELP ME

    Mr President

    I found the solution

    I have install MS 72552.exe

    & his departure find device

    Thanks for supporting.

  • 6600 HP Office Jet: Samsung devices do not find my wireless printer.

    I have a Samsung galaxy phone s5 and a Samsung galaxy tab s. Tablet I bought an HP officejet printer 6600 on there a year and a half and everything was connect and working properly everything wireless from my phone and tablet. Just recently my Tablet and phone will not find my wireless printer more? I still have the wifi service and my devices can find my fine router and Internet service.  I borrowed a non portable samsung to check that it was not a printer problem because she has always found a printer and worked well. I don't know but, possible had a software update on my phone and tablet that could change something I guess?  Any ideas to fix or try to fix it. I don't have a pc.  Thank you

    Hello

    Things to quickly check would be that your printing device apps (ePrint etc.) are updated and that if there was no wifi password changes that this has been updated on your printer also.

    I recommend also, if it is not already in place on your android devices to download the HP print for android (be sure to activate the plugin in settings after downloading).

    After all the above steps, I will re-start your devices and if this does not help, I would also like to restart the printer. Finally, I would like to restart the router if none of the steps above help.

  • Why windows media player is not find my device

    I have a HTC Sensations XE and when I have it connected to my laptop, Windows Media Player is not finding the device for me to sync music to my playlist. I couldn't already sync music to my HTC Wildfire.Should Windows Media Player automatically recognize the device as soon as it is connected?

    Hi Carol,.

    ·         The device is detected on the computer?

    Follow the steps mentioned below and check.

    Step 1: We recommend that you check if the sync settings are correct. To do this, follow these steps.
    1 open Windows Media Player.
    2. click on the arrow below the Sync tab, point to the device, and then click Advanced Options.
    3. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.
    4 restart the media player.

    The next time that you want sync, connect the device to your computer and click on the Synchronize tab, then click Start Sync.

    Step 2: Add a device to sync in Windows Media Player.
    1. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.
    2. read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.
    3. selection of automatic synchronization means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".
    4. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.
    5. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.

    For more information on "Windows Media Player sync: frequently asked questions" visit this link: http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions

    Hope it will be useful.

Maybe you are looking for

  • HP Pavilion All-in-One-23-q242 memory

    I just ordered the above mentioned computer and it comes with 8 GB of ram with a slot open for 8 GB of additional ram. I checked that various documents here and there seem to be 2 different lists - PC3-14900/DDR3-1866 and PC3L-14900 DDR3L-1866. Also

  • Zip files

    How to decompress a file photo?

  • "No filtering" message when installing wireless

    I'm trying to connect a HP Photosmart Plus B210 to my network. I keep failing the Test "No filter" when I run the Diagnostics of the printer, I have Verizon FIOS, I don't do MAC address filtering. I have 5 other wireless network devices The printer i

  • HP Envy - battery - charge only to 50% (brand new!)

    Model: m6-1225dx SKU: 7703056 HP - ENVY 15.6 "laptop Windows 8 Hello! I hope someone can provide some guidance. I have seen a lot of useful information on these cards, especially on this issue, but I think mine is a bit tricky... I bought a new HP En

  • UTL_FILE other line Terminator with implementation

    I want to have a different line terminator than LF + CR on a Sun-Unix System DB 10R2.It works very well with this procedure, if I have a constant string like "Hello."But when I use this slider, he always writes an empty file on the directory.I can in