4 shared SFP (miniGBIC) slots?

Similar Questions

• 'Save' and ' Save as ' for sharing NTFS periodically fail

  A company with their first Mac user is a problem of periodic backup.  At some point during the day, the user getting an error that the server is not available when using 'Save' or ' Save as '.  Suddenly no emissions, Photoshop or TextEdit, can save or save society Windows (NTFS) Server slot.  The work can be saved on his desk and then slips into the same shared folder that does not reach the "File: Save" operation  After an hour or two things will return to normal.  None of the Windows machines presents the problem.

  Looks like it would cause a periodic server process.  Everyone recognizes this behavior, or have a fix?

  NTFS is not a supported format for OS X writing if devices is directly connected.

  If it connects over a network to a NAS server not or not on the ad that she can try instead of SMB CIFS

• Tecra M10 - 1 H 4 - change shared video RAM worth?

  Hello

  I have a Tecra M10, with the standard 2 GB of RAM, I also added an extra 256 MB of available RAM slot. Can I change the value of RAM shared graphic? In the properties of XP Pro, I can see that it is fixed at 1024MB which is stupid because I only 2.25 GB in the machine.

  I can't locate any settings even in the BIOS, where I thought I could change it. It's a mobile graphics chip Intel GMA 4500MHD. Any help is appreciated...

  I also seem to get some horrible slow down on the laptop too, when I have about 10 different windows open, (be it the same application or different) when I switch to another window/application from time to time I have to wait for the laptop to redraw the new window very slowly?

  I updated the driver too - claims I'm on: 6.14.10.4953

  See you soon

  TC

  Hey Buddy,

  No, you can change the video memory value of t. Everything will be controlled automatically and there is no value in the BIOS or the display driver where you can change it.

  Video RAM depends on the RAM you are using on your laptop. Increase system memory values for the available total graphics memory, decided video memory and shared system memory will be higher.

  So, to get more video RAM upgrade your laptop with more system RAM.

• Optical drive slot, media with paper label

  I copy lots of CDs for my wife chorus. It appears (process of elimination) CD (with standard around the CD labels) turns properly, make a LOT of noise, can not climb, may hang on a track and will not eject, even after all the noises appropriate ejection. The last of them, I've tried finally jumps after several hours. I'm guessing that the thickness of the media is what is the cause.

  CD printed surface seems to work well, and the ones I burn very good ejection. I print my labels directly on printable CD I have (thanks to my brother InkJet) burn and they load, burn and eject fine.

  My primary iMac is a late 2009 / early 2010. Now, I took the drive incriminated upstairs for my G5 iMac ancient network. The paper CD went in fine, carefully read and ejected very well. So, I just left it up there and accessed through sharing. But it is a workaround.

  Apple suggested replacing the optical drive, but I wonder if my theory 'too-thick' is logical and I need a new (as long as I keep the G5). In fact, a new may present the same problems, right?

  Does make sense?

  Hey Harris,.

  Yes, that makes sense. Because the SuperDrive is a specific thickness, you will encounter issues with the drive being accepted or ejection of him as well. Take a look at the general troubleshooting for the slot loading SuperDrive for this response and a few additional questions you may have.

  Get help with the SuperDrive slot on your Mac computer loading
  https://support.Apple.com/en-us/HT201788

  Take it easy

• writing in shared variable published network hosted on rt (defined as slave modbus for crio) problems

  Hello Forums or

  This is my first post on this forum and I've been using labview for about 8 months now

  I have a problem about writing data in the modbus registers through a server of e/s defined as a slave modbus for my hardware 9074. Once I finished the project of construction and deployment of the variables and by following the instructions here , he reports no results but a row of zeros. I have the DSM nor opened and configuration modbus master to see whether the data is actually read or written on the respective sides that give the same line of zeros so.  What I am actually trying to write is a single-precision floating data table. The registers are structured F40000-F46534 runs from 10 items or have them for range AF40001L1-AF46534L1 of the AF40001L10 point where it's an array of length 10. (Referenced beaches here)

  I know 1 thing for you, the modbus connection works and is ready for data requests, I tested cela NI DSM and set manually the data for and received my master.

  System and project specifications

  Windows 7 operating system

  LabVIEW edition development system complete 2011

  No module Labview DSC, but I use the real time such referenced by one of the documents

  This project is an application in real time with fpga mode (and not scan interface)

  The master and the slave are the same network and subnet

  Connection Modbus type: TCP

  9074 compact slots rio 8

  9234 module x 3

  module 9221 x 1

  9472 module x 1

  Engine service Variable shared running on windows os and rtos system

  Used this guide to learn more about the Protocol modbus, as I have searched all over the internet to learn more about modbus

  I already have software Modbus IO Server installed on the crio thanks to max or 1.8 for NI RIO 4.0 version

  file attachment (s)

  Image of software specifications Crio

  Image of data written in scheme-block rt variable

  Short version of the problem: why is the e/s no variable writes in with the converted correctly data?

  Okay, Yes, it's that I was the one proposed. Regarding the news of the error, if you look at the bottom of your image to DSM, you see a little commfail and an error code, but it seems that those are OK.

  The only thing I can think is that DSM (or another function) is written for a range of values that includes 400004. I suggest you to put into service 4-going to a range of 3. 3 s are entered only (perspective control), then you can be sure that the master is not trampling on the data. Once you have checked that, look at DSM and any other code running to make sure q EU not accidentally write 0s to the same reg.

• HP Compaq TC4200 - increasing shared memory graphics

  Hello world

  I bought an another HP TC4200 on ebay, I was wondering if I could increase safely shared graphics memory. I've played Netflix and Hulu thin on the 1st 4200, but with the nexted that I hoped to spend to play HD videos since I connect it to my TV.

  Thank you

  Andy

  (Got tired of paying Microsoft $10 just to watch Netflix on my XBOX, since I hardly play on it)

  You can not directly increase graphics memory.
  Its not like RAM, where you can add more memory with a different RAM slot.

  You may need to install the new graphics card if supported.

• Failure to build LabVIEW application on Linux using "Shared library".

  In order to create a LabVIEW application on linux without X display, I have respected the LabVIEW VI using the shared library for Linux. I did it by clicking with the right button on construction Specifications and selecting New > Shared Library, and in the section Advanced , check the box labeled embedded version using the runtime engine. At the end of the build process, a message to inform that the build failed with the following message:

  "Error 127 to the Exec System: sh: gcc: command not found".

  The error code is not set. No one has provided a description for this code, or you could have wired a number which is not an admission of error code error code. »

  I have had no compling the LabVIEW VI in normal mode, so am confused about which is the problem.

  Hi Julian,.

  GCC is a compiler C and C++ under Linux.  A simple way to check if it is installed is to open a terminal and type 'gcc', if the command is recognized then the package is already installed, and the problem must lie elsewhere.  If this slot of Linux has a package manager, then it must be posted in here also.  If not then it could point to him being not installed or missing a dependency makes not accessible from the command line.  Here is a link that should hopefully scroll you through installation of gcc with Redhat: http://www.cyberciti.biz/faq/centos-linux-install-gcc-c-c-compiler/ .

• Understanding shared RAM

  Hello

  HP suggests I buy a SHARED RAM module to 125 Dollars based on the module of my laptop code: 641369-001. This HP product is the only module marketed as SHARED. My laptop is a module of ADATA 4 GB at $ 45 and after performing a global search on the web, find the category shared does'nt. Shared fact implies to my second existing memory slot in my book or module execution? My graphics card is DEDICATED so I don't see why shared RAM is necessary. Except that I missunderstood something.

  WHAT IS A SHARED RAM MODULE?

  WHY DO I NOT APPEAR UNDER A DIFFERENT BRAND OF PRODUCT?

  IS THIS THE SAME MODULE A-DATA I BUY WITH THE SAME EXISTING PLUG WORKING SMOOTHELY WITH THAT?

  Fotzou wrote:

  Hello

  HP suggests I buy a SHARED RAM module to 125 Dollars based on the module of my laptop code: 641369-001. This HP product is the only module marketed as SHARED. My laptop is a module of ADATA 4 GB at $ 45 and after performing a global search on the web, find the category shared does'nt. Shared fact implies to my second existing memory slot in my book or module execution? My graphics card is DEDICATED so I don't see why shared RAM is necessary. Except that I missunderstood something.

  WHAT IS A SHARED RAM MODULE?

  WHY DO I NOT APPEAR UNDER A DIFFERENT BRAND OF PRODUCT?

  IS THIS THE SAME MODULE A-DATA I BUY WITH THE SAME EXISTING PLUG WORKING SMOOTHELY WITH THAT?

  Hello

  I'm not familiar with this, but have noticed that HP use two different modules on laptops with 6 GB of RAM (for example). The 4 GB of RAM is a chip 16 one and the 2 GB RAM is a module of 8 chips. You can see the chips yourself. The shared module has only 4 chips on each side (8 chips module) so I think that these chips can only be used with a module of 16 chip. I don't know this advice and buy the same module as the original.

• Problem of sharing a printer on a network XP

  Hi all
  I have a wireless network using two computers that are running Windows XP Pro
  and Windows XP home. There is no problem getting the client machine,
  one running Home Edition to have an Internet connection. I'd do it
  you would like to be able to send documents to the printer on host machines. Here
  the problem is:

  When I run the installation wizard network on the XP Pro machine
  invariably, wants to use the 1394 connection to be one that is
  shared. The other two options are the Marvell ethernet controllers
  only one that is in use. When I'm asked to do a network drive
  I have only five options to store the data created by the wizard. The
  first of all is the floppy drive, and four are slots for memory cards on
  a card reader. The program does not show me one of my two
  optical drives, so I can't make a CD. The problem is the client machine
  has this no card reader or floppy drive!

  When I run the network installation on home computer Wizard and try to
  save network settings, it tells me that there is no optical drive
  installed when in fact it doesn't have a CD burner!

  At one point, I was able to share the printer, but unfortunately I did
  the error to remove the printer from the client machine, which, in
  Turn it removed from the host machine. Now no matter what I do I can't
  Download this sharing to make it work again.

  I also tried to disable the firewall 'online armor' on both
  machines without result. At some point look under the firewall
  configurations, I have seen the host machine, appear on the
  client and vice versa. Now I can't do anything, I don't even know
  If I was able to do a network disk that it would solve the
  problem.

  I am at a loss to know what to do next if anyone has any ideas I'd be
  be more complimentary. Please try and keep your directions relatively
  simple as it is obvious, I'll have a chance to do what I do.

  Thanks in advance for any help!

  Tinsby

  If you do the same thing but replace the IP address for the computer name?  i.e.\\192.168.x.x\printername (whatever the address IP is for the host machine)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is there anything I can change/device manager/cmd Vista for my job wireless in the slot 2 PCI?

  System:
  E Machine T5086
  Vista Home Premium 32 bit SP2
  Intel Pentium 4 3 GHz
  2gigs RAM
  MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
  Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN Card

  Background:
  I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.

  Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.

  Troubleshooting based on other threads:
  *. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.

  1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)

  2. uninstalled wireless again. Restarted. Reinstalled.

  3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.

  4 uninstalled. Starts in Mode safe. Reinstalled.

  5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)

  6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.

  7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.

  8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.

  9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.

  10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."

  About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.

  Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.

  Hello

  It's probably the shared IRQ that creates it.

  Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16833166022&cm_re=usn_wireless-_-33-166-022-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• R.620 with two INTEL X 520 Dual Port 10 GB DA / SFP +.

  We have R620s running for our VMware ESXi environment. Currently, each server has an Intel x 520 with sfp + ports 10 GB (2) and (2) gig ethernet ports. Each server also has a Broadcom 4 gig ethernet card port. Can I exchange the Broadcom card on each server with a different Intel x 520, so that each server has ports sfp + 10 GB (4) and (4) gig ethernet ports?

  Thank you.

  Hello

  jmartinich

  Ports sfp + 10 GB Intel x 520 with (2) and (2), gig ethernet ports

  Which resembles the daughterboard X 520/I350 network. You have only a NDC slot in the system, only one of those can take place. I do not show a similar adapter PCIe version.

  If you have 2 PCIe 3 slot CPU configuration while you might add just another X 520 dual port. If you have a PCIe 2 connector configuration so I am not all ports that you are wanting to get a valid population.

  Thank you

• PowerConnect 6224: Dell SFP + port supports combine Dell SFP?

  I have a Dell Powerconnect 6224 switch and I installed a Dual Port SFP + Module of adaptation for PowerConnect
  6200 series at bay2 at the rear of the switch. I inserted a transceiver, SFP 1000BASE-LX, wavelength 1310nm 10km Reach in the SFP slot + and the other end is connected to a connector SFP 1gbe. I don't have any link. My question is if Dell SFP ports + supports SFP transceivers or it only supports SFP transceivers +?

  I checked the ports to help an SFP + SFP +, 10GbE, copper Direct Attach cable Twinaxial, and link LEDs are lighting up.

  I believe that the SFP ports + back work with SFP transceivers. Ports before combo will work with SFP transceivers. Another thing to look at is the cable being used. Don't forget that there are specifications that are compatible with transceivers FPS are you wanting to use. A SFP + SFP connection would require that the SFP transceiver + supports a connection of 1 GB.

  Hope this info helps.

• 10GbE SFP + LR transmitters for Broadcom 57800 S

  Hi all.

  I have a r.620 with a card Broadcom NetXtreme 58700 S daughter 2x10GbE SFP + slots.

  Dell has only SR (short-range 850nm) issuers listed on their homepage, but need us a 10GbE SFP + Transceiver for the LR 1310nm wavelength. Is there a recommended ARVA LR or can I use any module SFP + support 1310nm?

  Thanks in advance

  The two I know are:

  Dell Reference number: N198M, Finisar - FTLX1371D3BCL-DL

  Dell Reference number: 5DCPW, Avago - AFBR-707SGDZ-D1

  I don't know there are several other transceivers with the same characteristics that will work.

• Trying Photo sharing using C++ Invoke

  I have this code and I thought that he should show me all available applications that could share the file, but it only goes to show me my 'BBM groups', and I don't understand why.

  InvokeManager invokeManager;
      InvokeRequest request;
      request.setAction("bb.action.SHARE");
      request.setUri("file:///accounts/1000/shared/camera/IMG_00000003.png");
      invokeManager.invoke(request);
  

  Don't know what I'm missing.  THX.

  Hi Steven,
  I had the same problem last week.
  You make an invocation that says 'I want the best app to handle this', then the system decides what to do.

  Rather than use the invoke handler, you must create an invokequery.

  Here is the code I use to share a file:

  invocation = Invocation::create(InvokeQuery::create().parent(this).uri("file:///" + invokeActionId = "bb.action.SHARE";
  connect(invocation, SIGNAL(armed()), this, SLOT(onArmed()));
  connect(invocation, SIGNAL(finished()), invocation, SLOT(deleteLater()));
  

  in onArmed I call

  invocation->trigger(invokeActionId);