404 error after /vcac
Hey, people!
I just sent vRA 6.2 in minimum mode. When I followed this link https://vra01.test.local/vcac
I get the error: HTTP 404 State - /vcac
What can I do to solve it?
Thank you.
Guys, I finally solved the problem... I simply reinstalled the vRA on environment not nested and everything seems suddenly OK.
Tags: VMware
Similar Questions
-
Original title: error 404 after the start. A wise mode of are one of the United Nations. Dock CAN I do?
When I start my computer, it will run windows but them without having to open anything that a 404 not FOUND nginx error. I tried to start in safe mode, and it does not allow me to do. Any ideas on what I can do and step by step on how that would be great. Would live to do a system restore back to factory settings complete, but I don't know how. THX
Hello
1. you remember to make changes on the computer before this problem?
2. What is the full error message you get started?
3. what happens when you try to start in safe mode? You get the error message?
Follow these methods.
Method 1: Run a virus with Microsoft Safety scanner scan to check if the computer is clean.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Method 2: Perform a clean boot and check the issue.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
Once more, you can check if you are able to get into safe mode. Refer to this article:
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222 -
I have problems with a site, SparkPeople.com. Although I can not connect successfully, through any other browser, I am able to go to the homepage without any problem. With Mozilla, I can login successfully and access to any other tab but the start page. Whenever I click on it, the page flashes momentarily until I get redirected to the URL http://www.sparkpeople.com/assets/diet4/str2_update_f2.jpgand gives me a "Page not found-error 404," which once more gives me the opportunity to connect or to sign up, even if I am logged in. Empty the cache and browsing history is not reset everything that is bad. So I don't know what to try next. As I mentioned in my question, it is only a problem in Firefox. In IE or Chrome, I have no problem whatsoever. I have an operating system Windows 7, version 6.1.
Any help would be much appreciated. Other than this very curious problem, I'm very happy with Mozilla.If you look in the Control Panel, uninstall a program, "Start Page" may be associated "Mâle" (you can click on the column heading to sort by alphabetical order of the Publisher). To see if you've got some undisclosed elements bundle, it brings together the additions by date by clicking on the column heading "installed in the.
-
Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.
original title: error 404 on all sitesI wouldn't worry IPSec.
I think the most important things to address are:1 search for rootkits.2 empty the DNS.3 reset the proxy settings.4 reset the TCP/IP and Winsock settings.Good luck! -
404 error received after the removal of the "host" of the hierarchy of pages
I use JDeveloper 11.1.1.6.0 and I think it is WebCenter SP5.
I encounter a 404 error page when I launch an application after that I have try to remove the entry for the 'House' of the hierarchy of pages. I also have the error even if I cancel the change in the pages.xml and restore the House. I get this in new projects as well as follows:
-Create a new portal Framework WebCenter application
-Open pages.xml
-Remove the heading 'home '.
-Save
-Ctrl + z to undo the deletion of the entry
-Save
-Run
-Recieve 404 after index.html tries to have the redirect to its default value "./faces/wcnav_defaultSelection".
I guess that other files are changed, but I can't understand what is happening. Also, I can't find any information on how the application determines where to go with the redirect of "wcnav_defaultSelection". Can someone help with this?Hello
Can I suggest that you enable logging of FOLLOW-UP for oracle.webcenter.portalframework.sitestructure and see what the newspapers?
Furthermore, the addition of the home page back to the hierarchy of the pages (drag and drop) does not throw error. It's only when you make a cancellation that the error occurs.
A further analysis on "Undo" the definition of the homepage does not return some of the attributes - the setting of page_parent and the permissions section.
Edited by: Jean-Philippe fathi 22 October 2012 10:07
Edited by: Jean-Philippe fathi 22 October 2012 10:15
-
404 error to access the administrator after installing CF10 with IIS 7.5
I installed ColdFusion 10 on Windows 7 Ultimate with IIS running. Everything seemed fine except when he tried to launch the administrator at the end page. I get a 404 error. I tried to run the IISConnector.bat file and no joy.
Any ideas? Help.
Nathan Manning
The problem has been resolved with the help of a support of Coldfusion engineer. In the end, a path corrupted to the aspnet_filter.dll for frame 4.030319.0 in the settings of the ISAPI filter in IIS.
Thanks for trying to help.
-
Impossible to go to any Web site of google - 404 error
When try to browse any site google.com get 404 error page. Delited my pc and installed firefox again - did not help. After that I have 'cleaned' mozila, I can't use google/com at all - can only provide Russian screenshot. I don't have this problem in other browsers
There is security such as Avast and Kaspersky and BitDefender software which intercept the secure connections and send their own certificate or otherwise interfere with a secure connection.
You can check the settings of Firefox.Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.
-
all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow
One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
You can try to reset (power off / on) of the router.
-
Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)
Hello
Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.
How can I get this file after all?Who should I contact for this?
Any help email address?Thank you
You are right. the link says 404 error.
To be honest, it is not for the first time something like this happens, but after a few days, everything was OK again.Try to download this update in a few days. I hope it will be fixed.
By the way: you have a few problems installing the BIOS update should be made as soon as POSSIBLE?
-
Install said get the F2 fix, but there is no patch, the link gives a 404 error
Hello.
Try to install the LV 2009 30 days evaluation version. After a 700 + meg download, installation it says get and install the f2 patch after installation, but before the first round.
OK, but the links on the page to do: -.
http://digital.NI.com/public.nsf/allkb/C3F88F3596A164AD86257647006FB022
It's where you end up, by clicking on the link in the notification Installer Panel
http://digital.NI.com/express.nsf/bycode/NotificationLV2009f2
give the 404 error or other links "available on 14 October.
Guys... It ' is 14 October, then where is it?
Unfortunately, this does not inspire confidence, despite the long conversation on the phone the other day with a guy OR here in the United Kingdom.
Do what gives. Problems with time zone or servers or nuked on the face of the universe due to so many requests.
DJB.
Hello..
Well ', it is downloading now as I type. Unfortunately, the entire saga does not inspire, after all, if something is not going to be available until the wake of the United States, why to advertise and make details page live some time before, also allowing automated installers for 'see' something is necessary, if it is not there to get? Are we not a global community of today. Oh, sorry, 'in the world' just gets you to the end of the road in some parts of the United States. (I have spent too much time there in the past and I still have to deal with too many guys focused on the United States through work.) "You don't want to know, trust me!)
Unfortunately, this kind of thing happens too often these days. Link to page / available, but what it points to is not yet complete or even tested. The background I had, we would do and first test the file, put it somewhere and make available, test links etc, then and then only, publish the said link.
But what the devil to I know whatever it is, I've only been playing with this kind of thing for the last 30 years! ;-)
Right, download is finished, so lets play...
The pain of the brain will start in some time, when I get to install the first instance (and patch) and trying to figure out how to use it.
See you soon.
Dave B.
-
404 error when you use the button «see more»
Since the beginning of Adobe Stock in August 2015, I never had the "Show more" button work properly when previewing of images. Can I use the options for most of this series, more of this model and similar images, but see button more still records a 404 error screen. At this point, I completely close my browser for Adobe Stock to reset. Any suggestions?
Hello
Please see the links below for help:
Has thrown two licenses-error 404 #92395577 kamimi
Hope this helps!
-
IOM 11 GR 2 PS2: 404 error trying to open the task detail taskflow
Hi all
recently, I upgraded 11.1.2.0.13 IOM (BP13 11 GR 2) version for 11.1.2.2.1 a (11 GR 2 PS2 BP1).
In the old environment, I have developed a composite SOA custom for the approval of the application, and he had a custom task detail taskflow we use for email notification.
After IOM upgrade, custom composite SOA and custom Office retail taskflow work together, but try opening the datails of the IOM task waiting for approval, I get a 404 error.
If I try to open the task directly from SOA worklist application details, it works correctly.
Someone has an idea to investigate and solve the problem?
Thanks in advance,
Daniele
Hi all
in the tab Administration ApprovalTask, change of parameter 'HTTP Port' at the port of IOM and "URI" to /identity/faces/adf.task-flow?_id=ApprovalTask_TaskFlow&_document=WEB-INF/ApprovalTask_TaskFlow.xml, I'm able to open pending the approval of the work detail page of IOM.
Thank you all for the contributions.
Kind regards
Daniele
-
Connection to the Server VMware View - 404 error
I was getting alarms in vCenter for CPU usage on my view connection server, I discovered was caused by the mysqld service 100% of the CPU usage. I restarted the server, and when she came back to the top, the https://server/admin page gave me a 404 error. After going through the papers, I found it (I think) caused by this:
2013-08 - 06T 18: FATAL 00:08.403Z (0CF0-0DB4) < Thread-1 > [ICE] ice beginning com.vmware.vdi.ice.server.Ice.startServer(SourceFile:1167) exception java.net.BindException: address already in use: JVM_BIND to...
and a bunch of java lines after that, but I'm sure that the relevant part is above. After some research, the only good head that I could find was to disable the IIS service, if it is installed, or configure it to use a different port. The service is not installed.
So I did a netstat - anub | FIND/n '443'. The PID for the service that is listening on the port is 4, which corresponds to the function of the SYSTEM. I don't know how to change it. So I'm stuck.
Ideas?
IIS has not been installed. I did a last shot of station and just sort processes by use of memory and kill them until the 404 went. Ended up be the MS SQL Reporting Services. So I disabled the service and the view Web Admin page returned to the top after a reboot.
-
Constant 404 error message - failed to install my product (premiere pro)
I just purchase the unique product - first adobe pro.
I have received the confirmation email, checked my address.
When I click on get started - I get a constant error 404. Sometimes the adobe.com / in flashes for a few seconds, then the 404 still comes back.Another way in
I connect on adobe.com with success.
I don't see anywhere in the account/profile/comms etc for me to download first. He told me that I bought.
But after a while the same 404 error.
???
I use Chrome/Yosemite
I'm not under any malware/spyware removal programs.
Neither my computer running sophos or other antivirus software.
Very frustrating...
Any help appreciated massively
Cath
Thank you - your sorted twitter team.
All good!
US$
C
-
"404" error when running ADF Applications using Weblogic / OAM / Webtier
Hi Experts,
Our organization works on the implementation of Weblogic 10.3.5 on HP - UX 11.31 / PA RISC hardware.
All is well enough to work, but we met a particular hurdle and I hope I can get some advice from people here in the forums.
We have virtual hosts within the Weblogic web layer for different areas. We also have Oracle Access Manager configured to protect some web resources (to force the user to authenticate to access the page). Each virtual host is configured to use the https protocol, and we have SSL certificates installed.
The problem arises when trying to deploy an ADF application for weblogic, then run it through one of these virtual servers. We want these applications to use https only. Mod_wl_ohs has also been configured to forward requests to the web layer weblogic.
App deploys fine, and when you try to access the app, we are redirected to a login page by OAM, which is what we want. However, when the application starts to run, it seems that ADF is adding to the URL query parameters, and when he does this, redirecting to https, which causes a 404 error. If you manually add the 's' on the URL, the application loads and works very well.
For example:
Say the url of our application is
https://foo.mydomain.com/MyApp/faces/search
Navigate to this url redirects to the login page. After the connection, we headed over to something like this (the actual settings vary):
http://foo.mydomain.com/MyApp/faces/search?_afrLoop=7078069345015890 & _afrWindowMode = 0 & _adf. CTRL-State = yvpch8hdh_4
.. which returns a 404 error.
If put us the 's' on the url, it works as expected.
Why is this happening? Why is redirect to the login page staying is not in https?
To facilitate debugging, we created a very simple jsp page that was not developed using ADF, and deployed in a similar way, and he remained in https after redirection from the login page.
Is this a specific problem ADF? Is something that needs to be configured in the ear file deployment of JDeveloper?
Any advice would be much appreciated...
Published by: corn on September 18, 2012 09:43Hello
It seems that you use any porxy between the two.
Please activate weblogicplugin activated under
Server-->
--> configuration--> advance. Enable this option and try to restart the server again.
Kind regards
Kal
Maybe you are looking for
-
Cursor flashes quickly between the pointer and the hand when you move the link.
Whenever it starts occurring, the status bar will start also flickering between showing the value of href of the link target and nothing, and tooltips (which would normally appear on the overview) briefly appear and disappear. The same thing happens
-
Satellite M200 Flash card does not work?
My new laptop Toshiba M200 (works on Vista) continues to display an error message that my Flash card does not work and that the system is looking for solutions. Other threads in this forum, I understand it could be a driver problem, but there seems t
-
data from the buffer before graph it and block size
I hope you can help me with this situation because I was collapsed in this situation for two days and I think I see the light in the short time and time is a scarce resource. I want to use a NI DaqCard-HAVE-16XE-50 (20KS/sec accordig to the specifica
-
ScanJet g3110: negative adapter appearing in my scans
When I scan a photo I also have the negative adapter located on the underside of the lid. Is there a way to make this happen?
-
Hello I have a laptop with Windows Vista Home Premium (I think that Windows 7) OS. I get messages on a not enough space on my recovery disk E. I tried the disk cleanup options, but try to delete old restore points which I think is what is using the