45003 upgrade modules E

Similar Questions

• Upgrade module WiFi mid-2012 MBP?

  Hello

  I have a MBP mid-2012 13 inches and I've already updated the memory, ssd and battery.

  I would like to know if the Wifi module is upgradable?...

  I currently have an 802.11n Wifi module that I wrapped up as upgrade to Wifi-ac

  Interfaces:

  EN1:

  Card type: AirPort Extreme (0x14E4, 0xF5)

  Firmware version: Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  MAC address: 5 c: 96: 9 d: 8 d: af:ef

  Locale: FCC

  Country code: U.S.

  Supported PHY modes: 802.11 a/b/g/n

  The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

  Wake On Wireless: support

  AirDrop: support, channel 149

  Status: connected

  Map of the airport is certainly available in this model:

  oth https://www.iFixit.com/Guide/MacBook+Pro+13-inch+unibody+Mid+2012+Airport-Blueto + Board + replacement/10363

  However, newer Mbps AC cards are of a completely different form factor, so I doubt that they would work. I've not seen any internal third party replacements offered at all speeds.

  There may be an external option, like this:

  https://eShop.MacSales.com/item/Edimax/EW7711MAC/

• Re: Satellite L670-112 - RAM upgrade module

  Can I upgrade my RAM memory? I have 2x2gb stock. I could replace these two with a 8 GB RAM module?
  Also how often choose?

  Can I put 8GB with 1600 MHz?

  According to the specifications of the laptop, you can improve up to 8 GB of RAM, and I found the info you can use 2 x 4 GB modules. Compatible 4 GB of RAM has PA3677U-1M4G part number.

  I put t know if you can use a module only but I'm pretty sure that 8 GB modules are quite expensive at the moment.
  Don't you think that a single module of 8 GB has an advantage over the 2 x 4 GB modules?

• Memory upgrade module HP Split x 2 (with current 4 gb) 8 GB

  Hello

  I recently bought a HP Split x 2, Core i3, (actually I had this laptop for three months), and it works like a charm with Windows 8.1.

  However, after a while I decided to install VirtualBox with Ubuntu and that was when I noticed how Windows 8.1 consumes memory in a way very hungry.

  The laptop comes with 4 GB and I was amazed that I have only 1.5 GB of RAM left.

  This is different with Windows 7 (which optimizes the RAM a lot better).

  I don't want to downgrade my OS from Windows 8.1 to Windows 7 and it's completely out of the question that I paid for Windows 8.1 Professional edition, so I want to upgrade my laptop with a 8 GB RAM.

  I managed to open Notepad to do some work on the way in which the memory locations (Yes, it took some guts there are two small screws that are hidden under the two rubber and the top cover as mainly attached with hinges that carefully, I managed to lose with a flat screwdriver, until I got the cover without braking it.)  ( :-)  )

  Now: The laptop comes with a memory of 4 GB regular 1600 DD3RL CL11 | PC3L - 12800S of brand a - DATA (curiously this isn't HP).  But overall, I noticed it's DD3RL and NOT of DDR3 (I read on the Internet, it's different on the voltage / power that uses as DD3RL consumes much less - mind my very basic technical knowledge)

  Here in my country there are few places that sell this specialized module memory (i.e.: DD3RL), and I want to know if I can just go ahead and buy DDR3 that they sell a lot.  This laptop is compatible?  Are there bottlenecks of the Mayor / performance / or any hungings on my laptop if I buy and install memory regular module?

  Please advice.  I want to quickly buy and upgrade my laptop.

  And finally, if there are 1 module 16 GB or more, it is possible to install a larger memory?  Is there memory limits that manages this laptop?

  Hello

  Simply, thay may NOT work. HP may use the RAM by other vendors such as Hyundai, Samsung... I don't see Kingston. I know that Dell uses also special RAM (not even name) on their machines. You can use the following tools to check:

  http://www.cpuid.com/downloads/CPU-z/1.70-Setup-en.exe

  and buy the right one.

  Kind regards.

• Error when upgrading module WLAN

  I bought a module wlan "Intel Centrino Ultimate-N 6300 (3 x 3)" to upgrade the module "Intel Centrino Advanced-N 6205 (2 x 2)' accompanying the EliteBook 8560w I bought.  When installed the new module (6300) I received the message:

  The system has detected that a module installed in the system wireless is not taken in charge and disabled

  WLAN Module ID (702)

  BIOS version is F28.

  Return to the previous module (6205) the error does not appear.

  WHA, you decide to do of course, is yours.

  You can find the card with the HP part number about it on eBay for much cheaper than you think.

  The bottom line is that no wireless card will work in any laptop HP, consumer or business model, unless it meets the criteria I posted above.

  Maybe it's not good, but it is so.

• 10.1.2.3 app server, xml, and version = "101020300" and upgrade Module = yes

  We have improved our 10.1.2.2 to 10.1.2.3 app server. I converted some of our Oracle XML forms before the upgrade. I noticed the next 'Version of the Module' element and value? What version of Oracle Forms is 10.1.0.2 or 10.1.2.2, 10.1.2.3. When I add the upgrade = Yes on the compile line, fmb file dates do not change and the same version in unix xml tag stays. Whenver I do it under windows the files change the dates of the canvas, but the version label also remains the same. Is it possible the 10.1.2.3 compiler uses 10.1.0.2 version for FMAS and knows there is nothing to change if she does not change the WBF during upgrade = yes?
  

  <?xml version = '1.0' encoding = 'UTF-8'?>
  <Module version="101020300" xmlns="http://xmlns.oracle.com/Forms"> 

  Published by: Mark Reichman on August 18, 2010 13:33

  Is not the upgrade = Yes option to upgrade from previous versions to 10 gr 2? I don't think that it is used when you patch just a major version.

• Satellite L650 - 13 M - memory - upgrade modules on the right

  I would ask if someone can help me here...

  I currently DDR3 RAM (1,066 MHz), but I want to move to 8 GB and I don't know if I can
  use the DDR3 PC3-10600, DDR3 PC3-8500 or at what speed (1066 or 1333 MHz)?

  Hello

  The Mobile Intel HM55 Express Chipset supports 8 GB RAM capacity and DDR3 1066 MHz (PC3-8500) are supported too.

  But also the DDR3 1333 Mhz and 1600 Mhz should be compatible.
  The fact is that if the FSB (front side bus) is set to 1 066 MHz, then the fastest modules would be pointing down, even if they could have run faster.

• Tecra M2 Ram upgrade - modules of memory should I use?

  I need to update my RAM on my M2 Tetra... what ram buy to maximize its performance?

  Thank you

  Hi Phil

  This simple Tecra M2 stand s the PC2700 200-pin (333 MHz) DDR SODIMM memory modules and you can increase the ram up to 2 GB

  You can use these modules to Toshiba:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  PS: I recommend using brand names modules and NOT no - name because the performance of Toshiba or Kingston modules is much better

• Upgrade memory for Satellite Pro L20

  I use a satellite L20 pro - PSL25E. That this PSL25E means in terms of satellite pro L20 - 102 until xxx. On the support site to keep just the numbers but not this alphanumeric expression. I need this in order to select the upgrade module suitable.
  If this can be answered, could someone tell me which module to upgrade should I choose in addition to the existing 512 MB?
  Thanks in advance

  Klator

  It of nice that you have found the laptop model after your own investigation.
  However, in my opinion the portable Satellite Pro L20 all support the same kind of memory, if it s L20-259 Pro or Pro L20-174

  The units are supported on these modules:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

• HP Pavilion 14-n019nr: upgrade RAM to HP Pavilion 14-n019nr

  Hello

  I have a HP Pavilion TouchSmart 14-n019nr Notebook PC. It is equipped with 4 GB of RAM DIMM single and I would like to upgrade to 8 GB. Could someone inform me on what is the frequency of the existing RAM module I need to buy the second module RAM of 4 GB of the same frequency. Also, what is the limit max that I can pass the RAM at? Thanking you.

  Hello

  There

  Two SODIMM memory customer accessible/upgradable module slots
  Support DDR3L - 1600 MHz dual channel

  And you can upgrade at 14 GB (8 GB + 4 GB)

  Supports the following configurations:
  ● 12288 MB (8192 MB × 1 + 4096 MB × 1) (some models only)
  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)
  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)
  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)
  ● 2048 MB (2048 MB × 1)

  Please use the second manual on the following link for more information and how add/replace RAM:

  http://support.HP.com/us-en/product/HP-Pavilion-14-notebook-PC-series/5405508/model/6617081/manuals

  Kind regards.

• HP HDX X18T - 1200 CTO: RAM upgrade. How to determine the manufacturer RAM on HP HDX X18T news

  A 8 GB of RAM.  I think the upgrade to 16 GB of RAM.  (1) what is a compatible RAM and (2) how to determine exact manufacturer details RAM installed?  I would like to correspond with just over 8 GB of RAM the same, but what I can determine information system is that it has 8 GB of RAM.

  Here's what the service manual says about it:

  2 customer accessible/upgradable module slots supports supports up to 8 GB of system RAM PC2-6400, 800 MHz, DDR2 dual channel memory

  If you have 2 slots. Max memory is 8 GB of DDR2 - 800 SO - DIMM. The major modules of DDR2 were 4 gigs and a pair of them now at the retail price is about $200 if you have a few precious memory in your laptop and you have the more memory, this laptop can use. When this laptop is out, 8 GB of RAM was a fantastic thing.

  Post back with more questions.

  Repair manuals

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• HP Turbo silver 15.6 ": upgrade of Ram"

  I'm looking into buying a HP Turbo silver 15.6 "but I'm looking at that has only 6G of RAM.  Can someone tell me if it can be upgraded to 8G?  Here are the stats that I can see on the laptop:

  HP Turbo silver 15.6 "15-ac143wm laptop PC with Intel Core i5-5200U, 6 GB memory, 1 TB hard and processor Windows 10 Home

  Hello. reinhartd.

  the maximum value available for your team in the RAM is:

  Memory module housing two non-customer-accessible/expandable memory

  (The Intel Core processors) Two-channel DDR3L-1600 support a no customer-accessible/upgradable module slot (Intel Pentium and Celeron processors) DDR3L-1600 channel supports only DDR3-1333 Dual Channel memory support

  (DDR3L-1600 demoted to DDR3L-1333) (for Intel BayTrail-M) Supports up to 8 GB of RAM in the following conƭgurations

  8192 MB total system memory (8192 × 1.) or (4096 x 2)

  Memory system total 6144 MB (4096 x 1) + (2 048 × 1)

  Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)

  Total system memory of 2048 MB (2 048 × 1).

  Service Manual:

  http://h10032.www1.HP.com/CTG/manual/c04653884

• Pavilion n 013tx: ready to Pavilion n 013tx of ram upgrade!

  HIII
  I think to update my laptop ram up to 8 GB. So I use ranging from 8 gb Corsair value select CMSO8GX3M1C1600C11 or I have to use 2 x 4 GB RAM?
  As you know, ram of the laptop can be increased up to 8 GB. (can it be increase more 8 or up to 12 gb?)
  Thank you once more!

  Hello

  Your device supports

  Two SODIMM memory customer accessible/upgradable module slots
  Support DDR3L-1600-MHz dual channel
  Support of the DDR3L-1600-MHz single channel
  Supports up to 12 GB max memory system (module DDR3L 1600 MHz), (some models only)
  Supports the following memory system configurations:
  ● 12288 MB (8192 x 1 + 4096 MB x 1 MB)
  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)
  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)
  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)
  ● 2048 MB (2048 MB × 1)

  More information how to replace the RAM: Manuel #2 of the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=5446914

  Please use the SAME brand with the existing RAM or part # #47 of the above manual page for the right of the RAM.

  Kind regards.

• HP Pavilion A3J87UA #ABC g6: memory and other upgrade on HP Pavilion laptop g6 A3J87UA #ABC

  I want to improve my HP Pavilion A3J87UA laptop #ABC g6... This laptop is with me since 2010 and I want that it last longer to upgrade. I want to give priority to upgrading the RAM and storage, which is the maximum memory I can put in this without errors and issues?

  Another thing is, I want to upgrade to Windows 10 (at the moment its Service Pack 1 64-bit Win7). Can I update my motherboard or even the graphics card for managing significant workloads such as Adobe CC, Cubase and urban landscapes of cities? Or I just upgraded modules memory only... Thanks for the help!

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c03086806

  1 RAM: currently it has 4 GB of RAM (2 x 2), you can upgrade to 8 GB (2 x 4). The following manual shows you how:

  http://h10032.www1.HP.com/CTG/manual/c02968637.PDF

  2 storage: there 750 GB at 5400 RPM, you can switch to the fastest 1 TB HDD or SSD even. In theory, you can use everything BUT please use existing brand for compatible.

  3 CPU: please visit #2 of the manual above. You need number of right-hand side on page 81.

  4. video: sorry you can't, the chip is solderd to the motherboard and it came with the CPU.

  5 motherboard: you're talking about purchase new machine, much better. It is not easy and NOT economic to upgrade the motherboard for the laptop.

  Kind regards.

• Pavilion 15-n027sl: type of motherboard and RAM upgrade

  Hello world
  
  I would like to know the maximum amount of ram (and type) that can be installed on the pc of my father, a 15-n027sl Pavilion. At the moment it has 1x4Go slots DDR3L 1600.

  Furthermore, the pc has two slots, but I noticed that the a slot does not work: when I put the ram in the second, the pc has not begun. Can someone help me?

  Thanks in advance

  M.

  @TheAcrobat

  Two SODIMM memory customer accessible/upgradable module slots

  Support DDR3L-1600-MHz dual channel

  Support of the DDR3L-1600-MHz single channel

  Supports up to 12 GB max memory system (module DDR3L 1600 MHz), (some models only)

  Supports the following memory system configurations:

  ● 12288 MB (8192 x 1 + 4096 MB x 1 MB)

  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)

  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)

  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

  ● 2048 MB (2048 MB × 1)

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c04439615

  NOTE: If you want to add or replace the memory in your computer with a unique memory

  module, insert the memory module into the location further away from the system board.

  NOTE: To use a double-channel configuration with a second memory module, make sure that both

  memory modules are identical.

  REO