Satellite L650 - 13 M - memory - upgrade modules on the right

Similar Questions

• Satellite U840 10 m - memory upgrade

  Hello

  I don't know if I'm in the right place because all other threads are videos with a response, and it is a question. But if I'm not, please point me to the right place.

  I have a Toshiba Satellite U840 10 M with 4 GB of RAM and I want to move to 8 GB. Can someone tell me where I can find information about how to install an additional memory module?

  Thank you
  Gonçalo

  Hello

  You can use DDR SDRAM 4 GB modules III memory SO-DIMM 204-pin
  You can use the modules of DDR3 1333 MHz or 1066 Mhz
  But the speed of the memory depends on FSB (front side bus)
  If the FSB would support only 1 066 Mhz, 1333 Mhz modules would be clocked down.

  Upgrade is tricky, because all covered plastic at the bottom of the unit must be removed. His guarantee of 13 live. If you need to remove all 13 screws to remove the cover and access the memory.
  As far as I know you can lose the warranty, remove the cover and would therefore ask a technician to do this work for you.

• Satellite P100 - 160 PSPAAE - memory upgrade question

  Hello

  can someone tell me if it works in my Satellite P100-160
  Part number: PSPAAE-01D00UEN

  Kingston memory - 2 GB - SO DIMM 200 pin - DDR II
  Storage capacity 2 GB
  Upgrade to generic Type
  DDR II SDRAM technology
  Factor of form SO DIMM 200-pin
  Memory speed 533 MHz
  Verifying the integrity of data Non - ECC
  Latency CL4 Timings
  Features without buffer memory
  Supply voltage 1.8

  Thank you
  TREV

  Why not?

  Satellite P100 supports the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules of the series.

  You can switch to 4 GB max.

  See this page:

  [Memory for Toshiba Satellite P100-160 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28327&ft=m&st=3]

  You will find compatible module.

• Satellite 3000 - X 11: memory upgrade question

  I have a Satelite S3000 - X 11 that I upgraded to 512 MB of RAM (2x256mb modules) more a 80 GB HD to 5 400 rpm Hitachi.
  It works fine, but it sometimes run out of memory physics. According to the Toshiba spec for this machine, it should take 1 024 MB of memory, but everywhere I look (including Crucial) said that 512 MB is the max.
  I found a few modules of 512 MB of the right type, but they won't work?

  Hello

  I agree with danydemaeseneire.
  This site of add-on memory confirms the info;
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14194&ft=m&St=3

  Satellite 3000 - X 11 handles max 512 MB and you can use the modules SODIMM PC133 144 pins

  Good bye

• Satellite A660 - 11 M - Memory Upgrade - problem

  Hello world!

  I'm having a problem with upgrading my RAm 4 GB to 8 GB memory ([link crucial 8 GB Kit | http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=28543EEAA5CA7304]) which should be compatible.

  When I turn on the laptop after mounting of the modules to all first all seem to be right and the Bios start, but then it will not load windows and stucks on a black screen.

  Could someone help?

  Thank you!

  Hello

  What to say: it looks like it s a problem with new RAM modules.
  The RAM modules aren t fully compatible or they malfunction.
  You must use other modules I made good experiences with modules from Kingston.

• Memory upgrade module HP Split x 2 (with current 4 gb) 8 GB

  Hello

  I recently bought a HP Split x 2, Core i3, (actually I had this laptop for three months), and it works like a charm with Windows 8.1.

  However, after a while I decided to install VirtualBox with Ubuntu and that was when I noticed how Windows 8.1 consumes memory in a way very hungry.

  The laptop comes with 4 GB and I was amazed that I have only 1.5 GB of RAM left.

  This is different with Windows 7 (which optimizes the RAM a lot better).

  I don't want to downgrade my OS from Windows 8.1 to Windows 7 and it's completely out of the question that I paid for Windows 8.1 Professional edition, so I want to upgrade my laptop with a 8 GB RAM.

  I managed to open Notepad to do some work on the way in which the memory locations (Yes, it took some guts there are two small screws that are hidden under the two rubber and the top cover as mainly attached with hinges that carefully, I managed to lose with a flat screwdriver, until I got the cover without braking it.)  ( :-)  )

  Now: The laptop comes with a memory of 4 GB regular 1600 DD3RL CL11 | PC3L - 12800S of brand a - DATA (curiously this isn't HP).  But overall, I noticed it's DD3RL and NOT of DDR3 (I read on the Internet, it's different on the voltage / power that uses as DD3RL consumes much less - mind my very basic technical knowledge)

  Here in my country there are few places that sell this specialized module memory (i.e.: DD3RL), and I want to know if I can just go ahead and buy DDR3 that they sell a lot.  This laptop is compatible?  Are there bottlenecks of the Mayor / performance / or any hungings on my laptop if I buy and install memory regular module?

  Please advice.  I want to quickly buy and upgrade my laptop.

  And finally, if there are 1 module 16 GB or more, it is possible to install a larger memory?  Is there memory limits that manages this laptop?

  Hello

  Simply, thay may NOT work. HP may use the RAM by other vendors such as Hyundai, Samsung... I don't see Kingston. I know that Dell uses also special RAM (not even name) on their machines. You can use the following tools to check:

  http://www.cpuid.com/downloads/CPU-z/1.70-Setup-en.exe

  and buy the right one.

  Kind regards.

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Satellite L650 - ODD does not read most of the CD or DVD after BIOS update

  While DVD copy, asked me to do an upgrade of the bios for the included software on my laptop, so I thought that coming from toshibsa, it must be safe. I closed all my apps and let the update occur, restarted my pc and tried to continue to copy my dvd.

  Now my dvd writer does not read most of my CD or DVD, original as well.
  I managed to get hold of my previous Bios version after a battle before the update to see if I can go back to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it.

  Any help would be greatly appreciated I have two days to copy 100 DVDs for a customer and I can't do it now,

  I have a laptop Toshiba Satellite L650 running windows 7 64 bit 8 GB memory with a SSD hard drive

  > I can return to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it

  I don t think that the BIOS is the problem here, the point is that CD and DVD support details are stored in the firmware of the CD/DVD drive and NOT in the BIOS of the laptop.
  So in my opinion the update of the BIOS is not the reason for your problem.

  I think you should check if cleaning the laser lens allows you to read discs.
  Use a fluid wadding tip and alcohol to gently clean the laser lens.

• Satellite L650-14F - lines and streaks appear on the screen

  I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
  The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
  The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
  The display driver is installed. What is the problem?

  PS: Sorry for my language and we hope you understand

  Hello

  There are some common steps that should be made on the one hand;
  -test new graphics driver
  -updated the BIOS to the latest version
  -recover the laptop to factory settings

  If the lines are still visible, you must connect an external display.
  If the lines would be visible also on the external monitor, the graphics card can be affected.

  In this case, the part needs to be replaced.
  But this is a job for a technician in ASP.

• Satellite L650-11F - cannot install driver page of the ATI graphics card

  I just bought a Satellite L650-11f and tried to update the drivers for my Ati hd5650.
  The problem is the control of catalyst can I install without problem but when I try to install the site display drivers driver ati I get this error:
  ATI catalyst mobility can t be downloaded due to the incompatibility of hardware/software on your computer. The version of your driver card is not supported. for an update of the graphics driver, contact the manufacturer of your laptop.

  How should I update with the latest display drivers cause the manufacturer are 6 months old?

  Hello

  You have a few problems with the Toshiba display driver?
  Graphics drivers from Toshiba are modified for mobile use, this means that the Toshiba drivers support for GPU overheating protection.
  ATI drivers don t support this protection and this is the reason why you get this message.
  Generally, you have to take the driver of Toshiba page

  Of course, it is possible to install the ATI drivers also.
  But you would need to install the driver in Device Manager.
  To use the Advanced installation procedure that would allow to choose the driver downloaded from the ATI page you simply forcing windows to choose such driver

  But note; You can use these drivers ONLY at your own risk

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• Satellite A300-23d and memory upgrade

  Hi all

  I want to upgrade my laptop memory 4 GB to 6 or 8, I got the Satellite A300-23d.

  What is the best memory for me? I'll get the Win7 64 bit OS
  I understand I have to do a clean install of the operating system, so my 2 Q is where can I get all the programs of Toshiba I got with the pc?

  Thannks for the help

  Hello

  Up to 8 GB of RAM according to specification for laptop computer, you can upgrade.
  You must use the RAMs 1 GB / 2 GB / 4 GB DDR2 800 MHz. If you 2x2gb for now, you can buy 4 GB of RAM additional or maybe two of them to use maximum RAM.

  Module of RAM of 4 GB compatible a part PA3670U-1M4G number.

  Win7 drivers download page you will find under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp
  Unfortunately for your models PSAGCE drivers are not available for the moment. I'm sure that the pilots will be ready for download in the next few days. From time to time to check this page and you will see when drivers will be there.

• Satellite P100-160 and memory upgrade

  I have a P100-160 with 2 GB of memory installed.
  I use Win7 (32 bit) and do some really serious graphics, and management changes.
  I use about 2.75 TB of hard drives (USB).

  Can you get it someone please let me know if I could reasonably expect to see an improvement in the performance and reliability by increasing the installed memory.

  Other (other than buying a new laptop) suggestions for performance improvement would be welcome.

  Thank you

  Ian

  If you are happy with this old piece of hardware you n t need new laptop computer. Upgrade of RAM is OK and you can do it alone. According to tender specifications that your P100 can be upgraded up to 4 GB of RAM.

  Compatible memory modules for your Satellite are:
  1 GB (PA3411U-2M1G)
  2 GB (PA3513U-1M2G)

  If you have any other questions you are welcome.

• Satellite Pro A200 PSAE4E memory upgrade:

  Satellite Pro A200-PSAE4E: comes with sticks of memory 2 x 0.5 GB installed.
  I think that these are some DDR2?
  Please can anyone confirm this and advise the maximum memory I can install as I appreciate different for
  models... but I can't find any information for this Satellite Pro A200-PSAE4E:
  Dave was soon

  Yes. Your portable computer is DDR2 RAM module. I don't know about you but I think you can improve it up to 4 GB. You can for example use a 2 GB RAM and level to 2.5 GB.
  Compatible RAM 2 GB module is with the PA3513U-1M2G part number.

  Good bye

• Satellite Pro A10-S703 Memory Upgrade

  I can't find the specifications for the upgrade memory for the model SA10-S703. Should what memory I buy? Please help, because this is the kind of emergency

  Hello

  Compatible memory modules for your unit are:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51).

  Your device can handle with max 1 GB of RAM.

  Good bye