4K are oversampled?

Similar Questions

• Using the C-series SCTL DIO module with slower than the top level [FPGA] clock

  Hey all,.

  I'm running online research on a problem that I have a lot of success.

  I have a chassis with integrated FPGA, top-level 9030 clock 40 MHz.  I have a NOR-9401 DIO C Series module plugged and the value that will be managed by the FPGA target.  I need to count some linear encoders to exactly 10 MHz, no more, no less.  They are periods and gives a result of such kind that if I oversample or underestimate, I get garbage.

  If I create a SCTL and assign a source of synchronization derived from 10 MHz, I get an error code generation who:

  "Node read e/s for DIO3 FPGA is used in a clock domain that it does not support.  Areas of clock supported include: the clock of higher and clocks that have a rate that is a multiple of 40 MHz, for example 40 MHz, 80 MHz, 120 MHz and so on. »

  I tried several ways to work around this problem; First I tried just using a while loop with a loop set to 4 is ticking timer, but it then takes 9 clock cycles to perform the count for a reason any (although this code may compile in the SCTL without any problem).  I then tried to use the SCTL with a constant of 'true' AS a hack for a 'timed sequence' framework-related, and that certainly has not worked.

  Are there any strategies or techniques, or settings somewhere to work around this limitation on the AID I need to taste exactly 10 MHz?  I'd like to do this quickly in the software and get this rolling as soon as POSSIBLE.

  An image of the relevant section of the code is attached, I'm happy to provide you more things on request.

  Thank you very much!

  Maia Bageant

  Thanks for the reply!  The problem ended up being a hardware problem based on how coders were connected.  Now that I've fixed it, they're perfectly happy are oversampled.

  I guess my question is always legitimate to other applications, but not necessary for encoders a.

• What site opens in the Muse a sampled image of error report is displayed, but the image cannot be found in the active panel

  When I open my file of site in Muse I get an error message that reports an oversampled image file.

  I carefully go through each item in the active panel but don't see any error or icons with the '+' for an oversampled image.

  How trap, find or change the mystery picture think Muse are oversampled?

  Popular opinion.

  Tim

  The initial problem noted here since mid-2014 was due to a bug when a rounding error that occurs when a cause of the image resized to fire by mistake, the warning message. Quite a few releases of Muse was treated there. It is possible a similar bug exists in some other code path or there may be another problem.

  More rational than before is likely to make you reach the .muse file [email protected] as well as a link to this topic for the context.

  If the file is larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. At least initially, we should not need the related assets, just the .muse file.

  Thank you.

• Pace error message after update to v5.0 Muse

  
  After the update to the new Muse, I load my site, he told me always that files are oversampled and can appear pixelated when the opposite is true. The files are used to a size smaller than or equal. I also had to recreate a link to all my pictures, for some reason any, he saw not the previous access paths, therefore be re-issued.

  Any suggestions? This isn't really a problem, but everything just annoying, obviously there is something that the program reads incorrectly.

  Thank you

  iMac 27 ", end of 2009

  Intel Core i7 2.8 GHz

  Mem 12 GB 1067 MHz DDR3

  10.8.4 OSX

  Element of page size displays the size of the page element in your Muse site using this image.

  Initial asset size indicates the size of the image full resolution on the disk that you imported originally.

  Resampled size shows the amount of data for this image is currently stored in your .muse file.

  If "resampled asset size" are smaller than 'size of page element', you need to import more data from the file to avoid just Muse cadence data already in the file of Muse, which may lead to a pixelated image.

  You must click with the right button on the item parent in the list to see the option 'import larger. "

  

• When saving a photo, the colors do not transfer correctly (they are dull) unless I have "save for web".  But when I save it for the web, it reduces the DPI up to 72 or 96 at best.  So I have to take the extra step to resize the image at 300 dpi, m

  When I "save under" I lose my color settings.  They are not more dynamic.  When I use save for web and maintaining devices, the colors, but PGD is only 72.

  This is because if you have not defined in all metadata option, you lose 300 ppi print metadata and file takes the default value of web metadata. 96 for Windows or the Mac 72.

  Set your metadata at all SFW, and you'll keep the printer to 300 dpi setting.  Oversampling a 72 ppi to 300 DPI file is very destructive and unnecessary.

  So just save your file again in SFW and simply select all as shown in the screenshot.

  

  Let me know how it went.

  Gene

• oversampled

  It's really just an annoyance but muse has decided my site has four images which have been oversampled and whenever I have throw the muse or go to publish the muse keeps reminding me to fix. OK, so I put four pictures until the error message came (but I deleted a slideshow with four images!) and the active panel shows all the oversampled icons.  I'm stuck with this error for ever?

  Images, used as ' shall' (browser fill, background fill, fill of the object)) are momentarily not alerted in the active panel, if they need to be oversampled.

• Oversampling in CS6 or resize perfect 7.5 vs scan at higher resolution

  Hello

  "I have a lot of images of landscape (holes of golf) which are 1600 x 1200 pixels and I would like to be able to print to a frame size of 8.5" x11.0 "with 300 dpi.

  I'd be better to use the features of the CS6 or resize them perfect 7.5 (I does not currently have this software but can afford it) resampling to "rate" the image or scanning smaller prints (4.0 "x5.3" at 300 dpi) with a greater number of pixels and then re-print images to the largest size?  Notes; I have an Epson Perfection V750M Pro scanner which is able to 6400 x 6400 scans.

  I realize I can get a free 30-day trial of the perfect resize 7.5 but I would try the forums before I left for the problem of downloading and using this new software and then comparing it to images digitized and pulled apart of thought.  This forum is much faster with the participation of the users, which I am not!

  Thanks for the tips.

  See you soon,.

  Mel

  Sorry, I consider generally 1600 x 1200 (2 megapixel) of a low resolution image (Yes, think of pixels in total).  And I don't think I'm far away, because you want a 11 x 8.5 print.   I usually work with files from digital camera oversampled order 6144 x 4096.  Today, I was working with a 50 astroimage + megapixels.  Everything is relative.

  I have nothing else that to move your image with the perfect oversampling process 7.5 resize 3399 x 2549 pixel (8.5 x 11.33 inches at 300 dpi).  Registered quality JPEG 9, because level 10 made the file too large for this site to accept.

  Perfect resize is decent for images with lots of natural content, like Fractals card pretty good nature.  Just keep in mind, it does not replace real detail.

  -Christmas

  

• My iPad is registered in the United States, but I live in Germany. I want to change it now to my German address. What are the implications?

  I bought my iPad 3 to the United States by giving a U.S. address. I had assumed (perhaps wrongly) that give my German address would be denying me access to the English user interface.

  I live in Germany and I have a iPhone5s that I bought here in Germany where I live.

  I want to "App PAYBACK" (which helps me to accumulate points when I shop here in Germany) to use on my iPhone5s , but when I search in the App store, I see only a Mexican version. When I tried to download this app on here https://www.payback.de/app

  I get the message "not available in the US store.

  When I communicate with the help of Apple, told me that, if I switch to my German address the Apps that I downloaded from the US store may not get an update whenever they are released.

  Are there other problems that I should wait if I move to my German address?

  Hello

  Go downstairs homepage itunes itunes page by Email support

  See you soon

  Brian

• I need to buy new RAM for my iMac mid-2011. What are the specific specifications?

  I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you

  Jbdammarell,

  I used OWC computer for my needs memory. Here is their recommendation for your computer.

  

• My Camera Roll and times got all the order as soon as I turned on iCloud photo library. My pictures are both old and new, please help

  All my photos are out now since I turned on IiCloud library. How can I fix?

  This - see album iCloud photo library

• Background app colors are more uniform

  Since the upgrade of the Sierra, web pages Chrome and the code editor backgrounds Atom are messy. For example, in the atom, it seems that I've highlighted throughout the text, part of the background is dark and some of it is lighter. In Chrome, bluish grey background of Facebook will be uniform and then become clearer on the sides abruptly. This sudden change happens on other colors, which actually look as if I chose the parts of the page with my cursor. Basically the uniform color of the origins on some Web pages or applications (Atom and Chrome) are more uniform.

  This substantive change only happens when I plug my HDMI cable on an external monitor. If I'm working on all of my macbook pro retina screen, everything seems fine. If I plug in my HDMI cable to an external monitor, the sets become non-uniform, even on the macbook pro (when mirroring) of the screen. I used the HDMI cable and the monitor with another computer and the problem does not exist, so I think it has something to do with macOS Sierra. Strangely enough, this problem only occurs with Atom and Chrome. Safari, for example, is absolutely perfect.

  I've included screenshots to show what I mean.

  Hi tedmcdo,

  Thanks for the upgrade to Mac OS Sierra! It seems like when you connect your external monitor to your Mac via HDMI, the Mac knows uniform color schemes. If this only happens when the external monitor is connected, you can try the reset NVRAM while it is disconnected from your Mac.
  
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.

  Information stored in the NVRAM may include:

  • The speaker volume
  • Screen resolution
  • Selection of boot drive
  • These latest panic the kernel, if applicable

  If you encounter problems with these features, you may need to reset the NVRAM on your computer. For example, if your Mac starts up from a bootdisk other than that specified in startup disk preferences, or a question mark icon appears briefly at the start of your Mac.

  How to reset the NVRAM on your Mac.

  After resetting the NVRAM, please connect the screen and check if the problem is resolved. Alternatively, you can try to boot your Mac in safe mode.
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:

  • Check your startup disk and attempts to fix problems if necessary directory
  • Loads needed kernel extensions only
  • Prevents elements start and the login items open automatically
  • Disables the user installed fonts
  • Delete font caches, hiding the kernel and other files of the system cache

  Together, these changes can help resolve or isolate issues related to your startup disk.

  Try safe mode if your Mac does not end commissioning

  Please use the Apple Support communities to post your question. These procedures should have your Mac showing its vibrant colors on the Retina display as expected. Good day.

• iOS and Mac OS hidden pictures are not hidden

  Is anyone else wondering why the function 'hide photo' cache of photos? you would think no hidden pictures would go into a hidden album itself is hidden, unless you unlock hidden photos and albums with a password or contact ID? What are the hidden photos that are not hidden? Hidden photos appear as suggested to share pictures in messages app or facebook! It's super annoying. I should be able to hide the photos and the hidden album itself the photos app and other applications as if they are not on the device at all!

  The images in the Photos masking is supposed to remove from certain points of view. "Hidden" is not intended to make their "secret." To do this, you need to remove app Photos and store them elsewhere.

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• What are disk images and can they be removed

  In downloads, I have a lot of disk images containing memory - such as Chrome - beyond 1 GB.

  I can remove them? Does make a difference? What are doing?

  All the other tips to speed up my mac because it is really slow!

  Have just updated the OS to Sierra - & that made matters worse, not better!

  A disk image is a convenient way for a developer to package and deliver the program. Once you have copied the program in your Applications folder, there is no reason to keep. You can safely remove. Note: Make sure that you have copied the image program in your applications folder before deleting.

• My photos and videos are not in chronological order, when I export the Photos app

  Hello. When I export my photos and videos from the Photos app on my iMac all the photos and videos are not in order. I need all the photos in good standing - I need to export about 5 000 pictures of the application in order for a meeting next week! Help, please!

  Ethan.

  This is not photo - it is a function of the viewing program (probably the finder) - once the photos are exprted form pictures you can see then in different ways which you control, Photos does not - by the finder you can view by name of son, byt several dates, by file size, etc.

  Usually, the best way to accomplish what you want is to export using the names of batch file numbeing and then sort by file name in the program viewing

  LN