513 CAPI2 event; Cryptographic services failed during the processing of the OnIdentity() call in the object of the System Writer
* Original title: 513 CAPI2 event
Hello. We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:
TraverseDir: Impossible to push the subdirectory.
System error:
Unspecified error
Here are the details:
-
-
-
Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2. What else can be done so that we can solve the problem of System Writer. Thank you.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Tags: Windows
Similar Questions
-
What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000
Hello
1. Since when are you facing this problem?
2. What is the number of brand and model of the computer?
3. have you made changes on the computer recently?
BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspxHope the information is useful.
-
New installation fails during the expansion of the files Windows 7 Pro
Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.
Motherboard: MSI MPower MaxCPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHzSSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)HARD drive: Seagate 750 G 7200 RPM SATA IIVideo: EVGA GeForce GT 2 640 GBCase: Corsair 400RPower supply: Corsair TX650MCPU cooler: H80iDVD: HP, BluRay BD R/W driveOS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)CPU Temp is around 42 C.If Memtest86 fails then you need to get into the BIOS and set the RAM timing. Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory. Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.
As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.
=============================================================
It's the set of test utilities that I use on every new system that I'm building.
Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of HDD sank medium over the past 18 months.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic============================ SSD Test Software =============================
Intel® drive SSD Toolbox
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455Life of the SSD: http://ssd-life.com/
OCZ Toolbox: http://ocz.com/consumer/download/firmware
SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/
= Once Windows installed =.
Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
Check their support site for the latest drivers as the CD that came with the computer
or motherboard may be older and less stable drivers.Visit the download of the manufacture of the graphics card:
Download and install the most recent Windows 7 or 8 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usSee also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.Prime 95:
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 8 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
http://www.alcpu.com/CoreTemp/CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
and the "SPD" tab shows the nominal speeds for each memory location that is filled.
#2 Note:
COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.phpTest of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/Pass marks burn in test: http://www.passmark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/CrystalDiskInfo:
http://CrystalMark.info/software/index-e.html
User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
http://www.almico.com/SpeedFan.phpGPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.phpJ W Stuart: http://www.pagestart.com
-
Hello
first of all, thank you for providing tools such as vCenter Converter for free.
I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.
The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:
Unexpected exception: converter.fault.FileCreationFault
-ERROR - convert: converter.fault.FileCreationFault
{(converter.fault.FileCreationFault)
dynamicType = < unset >
faultCause = (vmodl. NULL in MethodFault),
file ="
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»MSG = ""
}
There is no other message log of the recent in the converter - server.log. The converter - worker.log says:
from reconfiguring the system...
using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig
ReconfigurationTransaction: cached reviews system volume
LocalPathToGuestSystemFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\LocalUndoFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...
TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault
Scheduled timer cancelled, succeeds StopKeepAlive
InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >
BaseParserImpl::Parse Config info is not cached
F:\VM\wartberg\wartberg.vmx analysis
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
Registry hive
. \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
Boot\BCD is responsible under the name mntApi397493888030118019Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001
MntApi397493888030118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi3984454896301180192 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi404763500730118019 hive unloaded
MntApi398445489630118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019MntApi406994304730118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi4192247261301180192 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi425417937030118019 hive unloaded
MntApi419224726130118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019MntApi427773541230118019 hive unloaded
Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))
VMOUNT library: 1450 error communication error with the pilot while
Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.Unable to load the registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.Error 16258 when you open the software hive
Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))
MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1
OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path
BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx
WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.
bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.
http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".
http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.
WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"
Scheduled timer cancelled, succeeds StopKeepAlive
bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.
As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).
Any help is appreciated!
Thank you
nepper
OK - I'll upload versions changed in maybe 15 minutes
muss weg kurz
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Photoshop elements 12 fails during the installation of the shared technologies.
I have the same problem as all these people. Yes, I tried all these things, yes I followed all the links and scoured the internet:
http://forums.Adobe.com/message/5914286
http://forums.Adobe.com/message/5909390#5909390
http://forums.Adobe.com/message/5904696#5904696
Elements of 12 install fails during the installation of Adobe Organizer. No indication of problems in the newspapers, just fails and rolls back. Near as I can tell that people at adobe don't know what is the real problem, they have only a long series of very complicated and obscure tricks that _might_ "solve" the problem. I tried all in all imaginable combinations and still can not get 12 items to install. I installed win7 vanilla stock, plain, applied patches, tried to install it and it always fails.
I repeat. This facility has failed me in the same way on a box own win7.
Any software that still requires one of these measures of hack to install must be sent to the shop for more tests. I mentioned to try all these things and more!
Copy the installer to the root of c:
Delete this folder or what
Make a new admin account and install with
Edit the registry
Disable services in msconfig
Install in safe mode
What would be more useful for me now would be either 1) a patch to correct this error of critical installation or 2) explicit explanation from Adobe on what the real problem is so I can fix it myself.
I'm a little upset, sorry for the tone. It is the worst single installation experience that I have ever met.
Hi Jeff,
To follow up, I got an adobeconnect session today with a very competent and friendly adobe technology. It seems that we have solved the problem. There was some kind of problem with air and/or bridge do not store their files updated, not 100% on the part so don't quote me, he said. He said the challenge is to completely uninstall anything adobe and start from scratch. The other option is a bit of hackers, but it works for me and saves me the trouble to completely redo the installation. To track here are the steps to achieve this work, ymmv:
-Go through the Adobe Premiere elements 12 install the process up to the point where the shared components installation crashes. Do not click OK.
-To start the task (ctrl + alt + delete) Manager
-Go to the pane and kill msiexec.exe * 32 process, the adobe Installer must die.
-Remove the Adobe Premiere elements 12 link that is created on the desktop. Do not use this link, it points to the Welcome screen and crashes.
-Also delete C:\Program Files\Adobe\Adobe first Elements, Premiere Elements 12\Adobe 12.exe, for the same reason as above.
-L'exe that works is in this same directory called "Adobe first Elements.exe", he does not attend the Welcome screen and it doesn't seem to work.
-Now it takes Adobe Application Manager to run, and we just killed the installer, so go to catch it:
http://www.Adobe.com/appsmanager
-You don't even have to actually run, just download and install and you're good (if you are not running it she updates to Adobe Creative cloud that is unknown to the consequences).
-Now start Adobe first Elements.exe and connect your adobe ID
-ftw, should be good to go.
I tried this on 3 different machines. The installer beat identical overall and this procedure has got it to work. NB - Organizer apparently still is not installed, but that doesn't bother me. Don't know if this will have an impact long term operations.
Thanks for your help, this doesn't seem to work for me now.
-isaac
-
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Any suggestions?
I can't restore to a date prior to the node without danger, he keeps failing?
Please help me...Hello
Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
Sorry, but I don't see any other solution.A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
At the end I backed up all my important data and installed new WXP. -
Original title: Windows 7 system restore always fail.
I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point. I don't have Norton AntiVirus.
If anyone can help solve me this problem I would be very grateful.
Thank you for your response. I forgot to mention in my first post, I tried both methods without success. However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.
Thanks again.
-
Test installation of the elements fails during the installation of shared technology
Have tried to install the trial of 10 items on a XP Pro and a Win7 Pro PC and have the same problem.
Test installation fails during the installation of shared Technologies, and then restores the installation of the elements Organizer.
Someone at - he seen this before? Any ideas?
This Adobe document lists installation troubleshooting steps, including the 'Shared Technologies' error:
http://kb2.Adobe.com/CPS/858/cpsid_85843.html
Ken
-
System Image backup has failed during the backup
I have a 2 years old HP pavilion g series notebook. I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used. I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
Product: A6Z59UA #ABA
Model: g61d60usHi CherylLyme,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it's a great place to find answers.
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003). Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)
I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup. The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them. You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store. If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.
You can probably buy an external drive for on the cost of the replacement of disks. Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few. I hope this helps.
-
Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work." How can this be repaired?
Hi rebick,.
Try the troubleshooting steps presented by spirit X in this thread.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?
On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:
Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?
3.6 GB is a very good number - much higher than most people's.
All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
Address 4 GB of space (64-bit versions can use much more). It's the
theoretical upper limit beyond which you cannot go.But you can't use the whole address space. Even if you have a
Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
said, you do much better than that). This is because some of
This space is used by the hardware and is not available for the operation
system and applications. The amount you can
use varies, depending on what hardware you have installed, but can
range from as little as 2 GB to 3.5 GB. It's usually around
3. 1 GB.Note that the hardware is using the space, not the real address
The RAM itself. If you have a larger amount of RAM, the rest of the RAM
goes unused because there is no address to map space to. -
Update failed during the restoration of Win10 for Win7
Hello
There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.
I've never met update of the issues before the restore Win10 to Win7.
Name of the update problem :
-Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)
Type of computer / OS :
-Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM
-Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit
Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :
-Windows Defender (off)
-Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)
-AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)
Previous programs anti-virus installed / uninstalled :
-factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.
-ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.
These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :
-Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000
-msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner
-windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0
-NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011
Latest updates successfully and the repetition does not install of KB3102433 :
Error codes for KB3102433:
-26/08/2016: 80200001
-29/08/2016: 13EC
-03/09/2016: 643
-03/09/2016: 643
Measures taken and the results:
1) has no installation by the restore process: (KB3102433), 80200001 Code
-revealed by timestamp in the update history
(2) Windows Update interface: 1 important update available (KB3102433)
-Click on install updates
Result (s):
-Failed / update history does not record the event
3) of http://support.microsoft.com/kb/3102433
-Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"
Result (s):
-"Installation failed...". Fatal error during installation"
-Updated story does not connect me
(4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool
Result (s):
-Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.
Identifier of the package: WindowsUpdateDiagnostic
Path: unknown
Error code: 0 x 80070002
Source: engine
User: (me, user Admin account)
Context: restricted
(5) run the System File Checker tool
Result (s):
(6) Windows Update interface: 1 important update available; KB3102433
-Click on install updates
Result (s):
-This time the story recorded event update:
Installation date: 29/08/2016
Installation status: failed
Error details: Code 13EC
(7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)
Result (s):
-He scored a few points set except one:
-"" Problems: Windows Update, error 0 x 80070057 do not set ""
-This stage caused the update Interface to turn red on the theme and lose all it's information. such as:
-1 important update available / 8 optional updates available <> before - now -online NO update available
-Final check of updates: front: 29/07/2016 - now: never
-Updates have been installed: front: 22/07/2016 - now: never
-"Install updates" button "Check for updates" has disappeared, replaced by
8) of http://support.microsoft.com/kb/3102433
-Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"
Result (s):
-"Installation failed...". Fatal error when installing... See log file»
-Updated history do not log the event
(9) click on ' Check for updates ' hopefully bring "updates available".
Result (s):
-He kept checking for about 2 hours without change
-I didn't know how to cancel the verification process, then...
(10)... Computer restarts
Result (s):
-updates stops
-Updated Interface:
-Does not display available updates
-Final check of updates: never
-Updates have been installed: never
* 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''
(11) select problem update (KB3102433), and then click on install
Result (s):
-A failed; Error Code 643
-Click on 'Try' again: same results
Any help would be greatly appreciated.
Thank you
Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.
Best regards, VZ :)
-
root.sh failed during the installation of RAC11.2g
Dear,
I try to install RAC 11.2 (version of the grid Infrastructure is 11.2.0.1) on both nodes of linux (OS version is 2.6.39 - 400.215.10.el5uek Oracle Linux 5.11)
SELinux + Firewall is stopped, ASM works fine (listdisks and querydisk has my drives correctly), ping between two nodes on public and private IPs is OK, the hosts file, configured for good.
Owner of the DSO is grid user, and this user is the same used during the installation of the grid infrastructure.
# /sbin/modinfo oracleasm filename: /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko description: Kernel driver backing the Generic Linux ASM Library. author: Joel Becker <[email protected]> version: 2.0.8 license: GPL srcversion: 28484D2A43A6D981AAB9246 depends: vermagic: 2.6.39-400.215.10.el5uek SMP mod_unload modversions parm: use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)
Installation was fine, no errors or warnings until running root.sh, the result was:
# /opt/app/grid/product/11.2.0/grid/root.sh Running Oracle 11g root.sh script... The following environment variables are set as: ORACLE_OWNER= grid ORACLE_HOME= /opt/app/grid/product/11.2.0/grid Enter the full pathname of the local bin directory: [/usr/local/bin]: Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ... Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root.sh script. Now product-specific root actions will be performed. 2015-04-20 17:06:03: Parsing the host name 2015-04-20 17:06:03: Checking for super user privileges 2015-04-20 17:06:03: User has super user privileges Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params Creating trace directory LOCAL ADD MODE Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. root wallet root wallet cert root cert export peer wallet profile reader wallet pa wallet peer wallet keys pa wallet keys peer cert request pa cert request peer cert pa cert peer root cert TP profile reader root cert TP pa root cert TP peer pa cert TP pa peer cert TP profile reader pa cert TP profile reader peer cert TP peer user cert pa user cert Adding daemon to inittab CRS-4123: Oracle High Availability Services has been started. ohasd is starting acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed: acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin. CRS-2672: Attempting to start 'ora.gipcd' on 'node01' CRS-2672: Attempting to start 'ora.mdnsd' on 'node01' CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'node01' CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01' CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'node01' CRS-2672: Attempting to start 'ora.diskmon' on 'node01' CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded CRS-2676: Start of 'ora.cssd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.ctssd' on 'node01' CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded DiskGroup DATA creation failed with the following message: ORA-15018: diskgroup cannot be created ORA-15130: diskgroup "DATA" is being dismounted Configuration of ASM failed, see logs for details Did not succssfully configure and start ASM CRS-2500: Cannot stop resource 'ora.crsd' as it is not running CRS-4000: Command Stop failed, or completed with errors. Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init Stop of resource "ora.crsd -init" failed Failed to stop CRSD CRS-2673: Attempting to stop 'ora.asm' on 'node01' CRS-2677: Stop of 'ora.asm' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.ctssd' on 'node01' CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01' CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'node01' CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01' CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'node01' CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01' CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded Initial cluster configuration failed. See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details
I found the rootcrs_node01.log file:
2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories
What did I miss?
Kindly advice...
Best regards
Hello
It seems some problems with the drive carrier
Create DiskGroup DATA failed with the following message is displayed:
ORA-15018: diskgroup cannot be created.
ORA-15130: diskgroup 'DATA' is currently disassembled
Check below link, seems a similar question:
ASM error in root.sh createdisk
Thank you
Monowar
-
DAC: task failed during the ETL for financial applications
I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 314 tasks successfully, but it fails at the task named:
'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.
DAC error log:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called Wed Sep 18 09:46:41 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [Sat Oct 18 09:46:13 2013]
End time: [Sat Oct 18 09:46:13 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [Sat Oct 18 09:46:14 2013]
End time: [Sat Oct 18 09:46:14 2013]
Disconnection of Service integration
Completed at Wed Sep 18 09:46:41 2013
-----------------------------------------------------------------------------------------------------
Informatica session log files:
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].
DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].
DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].
DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].
DIRECTOR > name of the repository TM_6683: [infor_rep]
DIRECTOR > TM_6684 server name: [infor_int]
DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]
DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].
DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]
DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [ASCII]
MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)
]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string
... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string
... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)
MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.
READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:
INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
[AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]
READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: Fri Sep 18 09:46:13 2013
Target table:
W_GL_LINKAGE_INFORMATION_GS
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])
WRT_8044 responsible for this target data no.
WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.
MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].
------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also
* I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer
* in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".but there is no table named 'AEHEADER' in the FROM clause
so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.
The final request looks like this:
SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
XLA_AE_HEADERS AEHEADER
XLA_EVENTS
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
* When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)
my questions are:
-What is the problem with this query?-How can I change the query in the workflow?
could someone please help?
Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks
-
BITS service fails with the error code 193: 0xc1
Program update of Microsoft with Vista SP 2 is a failure with error code 80246008. Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed. When I try to start it, it fails with the error message 193: 0xc1.
The only suggestion I have for this fix is to reinstall Vista. It is probably not necessary?
Hello
I suggest you follow the steps mentioned in the article below.
You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service
http://support.Microsoft.com/kb/916251
If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.
Update for Windows Vista (KB960568)
Click the link below for more information about the Windows Update error.
Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
http://support.Microsoft.com/kb/956706
Windows Update error 80246008
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
My Macbook 13 "Late 2008 Unibody battery is dead.
I have a Macbook 13 "Unibody I bought the day it was released October 14, 2008, and it is an object of value. I took it out yesterday El Capitan running, but it still works. The reason why I wanted to remove this from the storage room is so I can cov
-
Hello My iphone4s did not reverse through wifi so I thought to do factory restore, when I restored via itunes updated firmware has failed, I tried 20 times same question, service center, I went and told that your camera has not, exchange of he's with
-
for Windows 7 bootable USB key. He says that we are unable to run bootsect
When I do my USB bootable for Windows 7. He says that we are unable to run bootsect to make the USB drive bootable. what I would do. Former title: usb install
-
Premiere Pro right click problem
HelloI have a problem with my right click on Premiere Pro, that I can't use it on a particular project. Indeed, when I work on other projects, the right click works perfectly, but when I come back to the project in question previously, right-click st
-
Hallo liebe community,ICH habe die Testversion von Adobe InDesign downloaded recently. Somehow kam're aber dazu, dass dieses Programm von meinem laptop Debby wurde wieder. Beim Versuch Rubis herunterzuladen alles works actually, bis zum Download Adob